1. fspcx-1.06.zip Driver
  2. oemsetnt.inf File Contents

oemsetnt.inf Driver File Contents (fspcx-1.06.zip)

 DOWNLOAD NOW
oemsetnt.inf Driver Update Utility 
; FireServe Wireless Internet PCI Adapter
; Windows NT 4.0 Installation File
; Version 1.06

[Identification]
    OptionType = NetAdapter

[PlatformsSupported]
    PCI

[Options]
    FS2MpcI

[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
FS2MpcIBYTE    = 0x20246D68
Manufacturer    = "FireServe"
ProductMajorVersion = "1"
ProductMinorVersion = "06"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "FS2MPCI"
ProductSoftwareTitle    = "FireServe Wireless Internet PCI"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\FSPCINT.sys"
NetRuleSoftwareType = "FS2MSys ndisDriver FS2MDriver"
NetRuleSoftwareUse    = $(SoftwareType)
NetRuleSoftwareBindForm = """FS2MSys"" yes no container"
NetRuleSoftwareClass    = {"FS2MDriver basic"}
NetRuleSoftwareSWBindable = {"FS2MDriver FS2MpcIAdapter non exclusive 100"}

;FS2MpcIHelpFile = "FS2MPCI.hlp"

ProductHardwareName = "FS2M"
;ProductHardwareFS2MpcMTitle = "FireServe Wireless Internet PCMCIA"
;NetRuleHardwareFS2MpcMType  = "FS2MpcM FS2MpcMAdapter"
;NetRuleHardwareFS2MpcMClass = {"FS2MpcMAdapter basic"}
;HelpFS2MpcMId = 20
ProductHardwareFS2MpcITitle = "FireServe Wireless Internet PCI"
NetRuleHardwareFS2MpcIType  = "FS2MpcI FS2MpcIAdapter"
NetRuleHardwareFS2MpcIClass = {"FS2MpcIAdapter basic"}
HelpFS2MpcIId = 20
NetRuleHardwareBindForm = " yes yes container"
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
;PcmciaKeyName   = $(!NTN_ServiceBase)"\PCMCIA\DataBase"
;Device_ID for PCI....
; (0x1638 == 5688)
VendorID = 5688
; DEVICE_ID (0x02001638 == 33560120)
FS2MpcICFID = 33560120

[GeneralConstants]
from        = ""
to          = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull           = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct    = ""
HardParameterKey = ""
TRUE                = 1
FALSE             = 0
NoTitle                = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath        = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media        = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status          = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
           goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status           = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
    set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(Function$(Option)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-ifstr(i) $(!NTN_InstallMode) == configure
      ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                 Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
         ifint $($ShellCode) != $(!SHELL_CODE_OK)
             goto ShellCodeError
         endif
                 set Error = $($R0)
                 set from = end
                 set to = end
         goto nonfatalinfo
          else
                 set StartLabel = configureadapter
      endif
    else
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    endif
    Set DLLPATH = $(SrcDir)
    set IRQValueIndex = 6
    set IoBaseAddrIndex = 7
;    set ChannelValueIndex = 3
;    set NetTypeValueIndex = 1
;    set RTSValueIndex = 46
;    Set ESSIDValue = "ANY"
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)

installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            goto end
        else
            set OldVersionExisted = $(TRUE)
        endif
    endif
    ifstr(i) $(DoCopy) == "YES"
        shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        else-ifstr(i) $($R0) == STATUS_FAILED
            shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set Error = $($R0)
            goto fatal
        else-ifstr(i) $($R0) == STATUS_USERCANCEL
            goto successful
        endif
        Set SrcDir = $($R1)
;       install "Install-Hlp"
    endif
    goto installproduct

configureadapter = +
    Set DLLPATH = $(!STF_WINDOWSSYSPATH)\drivers
    ifstr(i) $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        ifstr $(KeyProduct) == $(KeyNull)
            Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
            goto fatalregistry
        endif
    endif
    Shell $(UtilityInf) FindService, $(KeyProduct)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R0) != NO_ERROR
        goto fatalregistry
    endif
    set HardParameterKey    = $($R2)
    CloseRegKey $($R1)
    ifstr $(HardParameterKey) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(HardParameterKey) ValueList

    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        ifstr(i) $(ValueName) == "InterruptNumber"
            set IRQValueIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "IoBaseAddress"
            set IoBaseAddrIndex = $(ValueData)
;        else-ifstr(i) $(ValueName) == "NetworkTypeWLU"
;            set NetTypeValueIndex = $(ValueData)
        endif
    EndForListDo

    set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex)))
    ifstr(i) $(IRQValue) == ""
        set IRQValue = *($(IRQList), 6)
    endif

    set IoBaseAddrValue = *($(IoBaseAddrList), ~($(IoBaseAddrValues),$(IoBaseAddrIndex)))
    ifstr(i) $(IoBaseAddrValue) == ""
        set IoBaseAddrValue = *($(IoBaseAddrList), 7)
    endif


adapteroptions = +
    set from = adapteroptions

;    loadlibrary "Install Diskette" $(DLLPATH)\FSPCINT.dll DllHandle
;
;    EndWait
;    ui start "InputDlg" $(DllHandle)
;    StartWait
;
;    ui pop 1
;
;    FreeLibrary $(DllHandle)

    goto end


;  ifstr(i) $(Option) == "FS2MpcM"
;    loadlibrary "Install Diskette" $(DLLPATH)\FS2MPCM.dll DllHandle
;    read-syms FileDependentDlg$(!STF_LANGUAGE)
;    SetHelpFile $(DLLPATH)"\"$($(Option)HelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
;    EndWait
;    ui start "InputDlg" $(DllHandle)
;    StartWait
;    ifstr(i) $(DLGEVENT) == "CONTINUE"
;        set IRQValueIndex = $(Combo1Out)
;        set IoBaseAddrIndex = $(Combo2Out)
;        ui pop 1
;    else-ifstr(i) $(DLGEVENT) == "EXIT"
;        set CommonStatus = STATUS_USERCANCEL
;        ui pop 1
;        FreeLibrary $(DllHandle)
;        goto end
;    else
;        ui pop 1
;        FreeLibrary $(DllHandle)
;        goto end
;    endif
;    set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
;    set IoBaseAddrValue = *($(IoBaseAddrValues), ~($(IoBaseAddrList),$(IoBaseAddrIndex)))
;    ifstr(i) $(!NTN_InstallMode) == configure
;       goto updateparameters
;    endif
;  else
;       loadlibrary "Install Diskette" $(DLLPATH)\FS2MPCI.dll DllHandle
;    read-syms FileDependentDlg$(!STF_LANGUAGE)
;    SetHelpFile $(DLLPATH)"\"$($(Option)HelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
;    EndWait
;    ui start "InputDlg" $(DllHandle)
;    StartWait
;    ifstr(i) $(DLGEVENT) == "CONTINUE"
;        set IRQValueIndex = $(Combo1Out)
;        set IoBaseAddrIndex = $(Combo2Out)
;        ui pop 1
;    else-ifstr(i) $(DLGEVENT) == "EXIT"
;        set CommonStatus = STATUS_USERCANCEL
;        ui pop 1
;        FreeLibrary $(DllHandle)
;        goto end
;    else
;        ui pop 1
;        FreeLibrary $(DllHandle)
;        goto end
;    endif
;    set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
;    set IoBaseAddrValue = *($(IoBaseAddrValues), ~($(IoBaseAddrList),$(IoBaseAddrIndex)))
;    ifstr(i) $(!NTN_InstallMode) == configure
;       goto updateparameters
;    endif
;  endif
   goto end

installproduct =+
    StartWait

    ifstr(i) $(Option) == "FS2MpcI"
                set-div DeviceID = $($(Option)CFID) 65536
            Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
            endif
            ifstr(i) $($R0) == {}
                        set Error = $(CANNOT_FIND_ANY_CARD)
                        set CommonStatus = USER_CANCEL
                        set from = "end"
                        goto nonfatal
        endif
        set AdapterList = $($R0)
    endif
;    ifint $(OldVersionExisted) == $(FALSE)
                ifstr(i) $(DoCopy) == "YES"
                Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                goto ShellCodeError
                else-ifstr(i) $($R0) == STATUS_FAILED
                                Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                goto ShellCodeError
                                endif
                                set Error = $($R0)
                                goto fatal
                    else-ifstr(i) $($R0) == STATUS_USERCANCEL
                                goto successful
                endif
                Set SrcDir = $($R1)
                endif
                install "Install-Option"
                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                goto ShellCodeError
                endif
                set Error = $($R0)
                goto fatal
                endif
;   endif

    ;
    ; Check to see if the product Software key exists already in the system
    ; service keys before we try to add the software component.
    ;
    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_READ) KeyNt
    CloseRegKey $(KeyNt)

    ifstr(i) $(KeyNt) == ""
        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
            $(NetEventDLL)
        Set OEM_ABANDON_SOFTWARE = TRUE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif
        Set SoftProductKey    = $($R1)
        Set SoftNetRuleKey    = $($R2)
        Set SoftServiceKey    = $($R3)
        Set SoftParameterKey  = $($R4)
        Set SoftLinkageKey    = $($R5)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                                                {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                                                {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                                                {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                                                {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                                                {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                                                {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalregistry
        endif
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                                            {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
                                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
                CloseRegKey $(SoftProductKey)
                CloseRegKey $(SoftNetRuleKey)
                CloseRegKey $(SoftServiceKey)
                CloseRegKey $(SoftParameterKey)
                CloseRegKey $(SoftLinkageKey)
        ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            goto fatalregistry
        endif
    endif  ;endif $(KeyNt) == ""

        ifstr(i) $(Option) == "FS2MpcM"
            Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
            ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
            endif
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                EndWait
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
            endif

            set IRQValue = *($(IRQList),6)
            set IoBaseAddrValue = *($(IoBaseAddrList),7)
;            loadlibrary "Install Diskette" $(DLLPATH)\FS2MPCM.dll DllHandle
;            read-syms FileDependentDlg$(!STF_LANGUAGE)
;            SetHelpFile $(DLLPATH)"\"$($(Option)HelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
;            EndWait
;            ui start "InputDlg" $(DllHandle)
;            StartWait
;            ifstr(i) $(DLGEVENT) == "CONTINUE"
;                set IRQValueIndex = $(Combo1Out)
;                set IoBaseAddrIndex = $(Combo2Out)
;                ui pop 1
;            else-ifstr(i) $(DLGEVENT) == "EXIT"
;                set CommonStatus = STATUS_USERCANCEL
;                ui pop 1
;                FreeLibrary $(DllHandle)
;                goto setfailed
;            else
;                ui pop 1
;                FreeLibrary $(DllHandle)
;                goto setfailed
;            endif
            set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
            set IoBaseAddrValue = *($(IoBaseAddrValues), ~($(IoBaseAddrList),$(IoBaseAddrIndex)))
            Set HardNetCardKey      = $($R1)
            Set HardNetRuleKey      = $($R2)
            Set HardParameterKey    = $($R3)
            set AdapterNumber       = $($R4)
            set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                    {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                    {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                    {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                    {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                    {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
             goto ShellCodeError
            endif

            set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),0},+
                               {BusType,$(NoTitle),$(!REG_VT_DWORD),1},+
                               {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                               {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
                               {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBaseAddrValue)},+
                               {IoLength,$(NoTitle),$(!REG_VT_DWORD),64},+
                               {Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1}}
;                               {Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+
;                               {NetworkTypeWLU,$(NoTitle),$(!REG_VT_DWORD),$(NetTypeValue)},+
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
                        Shell $(UtilityInf),AddDefaultNetCardParameters,$(HardParameterKey)
            endif
            CloseRegKey $(HardParameterKey)

            set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
            set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
            set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                    {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif

            Shell $(UtilityInf),AddDefaultNetCardParameters,$(HardParameterKey)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
            endif
            CloseRegKey $(HardNetCardKey)
            CloseRegKey $(HardNetRuleKey)
            CloseRegKey $(HardParameterKey)
        else ;FS2MpcI
                Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
            ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
            endif
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                EndWait
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
            endif

            set IRQValue = *($(IRQList),6)
            set IoBaseAddrValue = *($(IoBaseAddrList),7)
;            loadlibrary "Install Diskette" $(DLLPATH)\FS2Mpci.dll DllHandle
;            read-syms FileDependentDlg$(!STF_LANGUAGE)
;            SetHelpFile $(DLLPATH)"\"$($(Option)HelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
;            EndWait
;            ui start "InputDlg" $(DllHandle)
;            StartWait
;            ifstr(i) $(DLGEVENT) == "CONTINUE"
;                        set IRQValueIndex = $(Combo1Out);
;                        set IoBaseAddrIndex = $(Combo2Out)
;                        ui pop 1
;            else-ifstr(i) $(DLGEVENT) == "EXIT"
;                        set CommonStatus = STATUS_USERCANCEL
;                        ui pop 1
;                        FreeLibrary $(DllHandle)
;                        goto setfailed
;            else
;                        ui pop 1
;                        FreeLibrary $(DllHandle)
;                        goto setfailed
;            endif
            set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
            set IoBaseAddrValue = *($(IoBaseAddrValues), ~($(IoBaseAddrList),$(IoBaseAddrIndex)))
            Set HardNetCardKey      = $($R1)
            Set HardNetRuleKey      = $($R2)
            Set HardParameterKey    = $($R3)
            set AdapterNumber       = $($R4)
            set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                    {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                    {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                    {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                    {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                    {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
             goto ShellCodeError
            endif

            set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),0},+
                                               {BusType,$(NoTitle),$(!REG_VT_DWORD),5},+
                                               {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                          {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
                                          {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBaseAddrValue)}}
;                                               {NetworkTypeWLU,$(NoTitle),$(!REG_VT_DWORD),$(NetTypeValue)},+
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
                        Shell $(UtilityInf),AddDefaultNetCardParameters,$(HardParameterKey)
            endif
            CloseRegKey $(HardParameterKey)

            set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
            set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
            set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                                                    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                                                    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif

            Shell $(UtilityInf),AddDefaultNetCardParameters,$(HardParameterKey)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
            endif
            CloseRegKey $(HardNetCardKey)
            CloseRegKey $(HardNetRuleKey)
            CloseRegKey $(HardParameterKey)
        endif ;endif FS2MpcI

     ifstr(i) $(Option) == "FS2MpcM"   
        OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName) $(MAXIMUM_ALLOWED) +
                hKeyPcmciaDatabase
        IfStr $(hKeyPcmciaDatabase) == $(hKeyNull)
            Debug-Output $(ProductSoftwareName)": OpenRegKey failed to open: "$(PcmciaKeyName)
            Goto fatalRegistry
        EndIf
;;;
;;;     Try to create the manufacturer keys in PCMCIA database,
;;;     but don't fail if it's already there.
;;;
        CreateRegKey $(hKeyPcmciaDatabase) {$(PcmciaManufacturer), 0, GenericClass} +
                        "" $(MAXIMUM_ALLOWED) "" hKeyPcmciaManufacturer
        IfStr $(hKeyPcmciaManufacturer) == $(hKeyNull)
            OpenRegKey $(hKeyPcmciaDatabase) "" $(PcmciaManufacturer) $(MAXIMUM_ALLOWED) +
                    hKeyPcmciaManufacturer
            IfStr $(hKeyPcmciaManufacturer) == $(hKeyNull)
                Debug-Output $(ProductSoftwareName)": OpenRegKey failed to open: " +
                                $(PcmciaKeyName)"\"$(PcmciaManufacturer)
                Goto fatalRegistry
            EndIf
        EndIf
;;;
;;;     Try to create FireServe PCMCIA product key under manufacturer key,
;;;     but don't fail if it's already there.
;;;
        CreateRegKey $(hKeyPcmciaManufacturer) { $(PcmciaProductName), 0, GenericClass } "" +
            $(MAXIMUM_ALLOWED) "" hKeyPcmciaProduct
        IfStr $(hKeyPcmciaProduct) == $(hKeyNull)
            OpenRegKey $(hKeyPcmciaManufacturer) "" $(PcmciaProductName) $(MAXIMUM_ALLOWED) +
                    hKeyPcmciaProduct
            IfStr $(hKeyPcmciaProduct) == $(hKeyNull)
                Debug-Output $(ProductSoftwareName)": OpenRegKey failed to open: "
                                $(PcmciaKeyName)"\"$(PcmciaManufacturer)"\"$(PcmciaProductName)
                Goto fatalRegistry
            EndIf
        Endif
;;;
;;;     Now write the values to the registry.
;;;
        Set NewValueList = {+
                {DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}, +
                {Driver,$(NoTitle),$(!REG_VT_SZ), $(ProductSoftwareName)}, +
                {InfFileName,$(NoTitle),$(!REG_VT_SZ),$(!UG_Filename)}, +
                {Option,$(NoTitle),$(!REG_VT_SZ),$(Option)}+
                }
        Shell  $(UtilityInf), AddValueList, $(hKeyPcmciaProduct), $(NewValueList)
        IfInt $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output $(SWProductName)": Cannot run AddValueList: hKeyPcmciaProduct (Lucent)"
            Goto ShellCodeError
        EndIf

     Endif ;endifFS2MpcM

;;;;;;;;;;;;
    goto successful
updateparameters =+
    set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
    set IoBaseAddrValue = *($(IoBaseAddrValues), ~($(IoBaseAddrList),$(IoBaseAddrIndex)))
    set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
                        {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBaseAddrValue)},+
                        {IoLength,$(NoTitle),$(!REG_VT_DWORD),64}}
;                        {NetworkTypeWLU,$(NoTitle),$(!REG_VT_DWORD),$(NetTypeValue)},+
    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
                Shell $(UtilityInf),AddDefaultNetCardParameters,$(HardParameterKey)
    endif
    CloseRegKey $(HardParameterKey)
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end

UpgradeSoftware = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    ifstr $(KeyProduct) != $(KeyNull)
                Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    Debug-Output "ShellCode error"
                goto ShellCodeError
                endif
                set !UG_Filename = $($R0)
                install "Install-Update"
                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    goto fatal
                endif
                SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
                SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
                CloseRegKey $(KeyProduct)
    else
                goto fatalregistry
    endif
    goto end
successful = +
    EndWait
;    FreeLibrary $(DllHandle)
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType        = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)

[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
                AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
                set !STF_NCPA_FLUSH_COPYLIST = TRUE
                CopyFilesInCopyList
    endif
    Exit
;[Install-Hlp]
;    set STF_VITAL = ""
;    AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
;    set !STF_NCPA_FLUSH_COPYLIST = TRUE
;    CopyFilesInCopyList
;    Exit
[Install-Update]
    set STF_VITAL          = ""
    set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
;    AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    exit

[Source Media Descriptions]
    1  = "FireServe PCI Driver Disk"

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386

[Files-Inf]
1,    oemsetnt.inf,    SIZE=99999,     RENAME=$(!UG_Filename)

[Files-FS2MpcM]
1,FSPCMNT.sys , SIZE=9999

[Files-FS2MpcI]
1,FSPCINT.sys , SIZE=9999

[LanguagesSupported]
    ENG

[OptionsTextENG]
    FS2MpcI  = "FireServe Wireless Internet PCI Adapter"

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
                 "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSoftwareDescription = "FireServe Wireless Internet PCI Adapter"

FunctionFS2MpcMTitle = "FireServe PCI Network Adapter Setup"
ProductHardwareFS2MpcMDescription = "FireServe Wireless Internet PCMCIA Adapter"
FunctionFS2MpcITitle = "FireServe PCI Network Adapter Setup"
ProductHardwareFS2MpcIDescription = "FireServe Wireless Internet PCI Adapter"

CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"

IRQList  = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
IoBaseAddrList = ^(IoBaseAddrChoices, 1)
IoBaseAddrValues = ^(IoBaseAddrChoices, 2)

[DialogConstantsENG]
Help          = "&Help"
Exit          = "Cancel"
OK            = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel        = "Cancel"

[FileDependentDlgENG]
Label1 = "&IRQ Level:"
Label2 = "I/O &Port Address:"
DlgType = "RadioCombination"
DlgTemplate = "WLA"
Caption = $(Function$(Option)Title)
Combo1List = $(IRQList)
Combo1Out  = $(IRQValue)
Combo2List = $(IoBaseAddrList)
Combo2Out  = $(IoBaseAddrValue)
ComboListItemsIn  = {Combo1List, Combo2List}
ComboListItemsOut = {Combo1Out, Combo2Out}
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
MinHelpId = 10
MaxHelpId = 1140
HelpContext = $(Help$(Option)Id)

[IRQChoices]
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "7",7
IRQ_5 = "9",9
IRQ_6 = "10",10
IRQ_7 = "11",11
IRQ_8 = "12",12
IRQ_9 = "14",14
IRQ_10 = "15",15

[IoBaseAddrChoices]
IoBase_1  = "0x100",256
IoBase_2  = "0x140",320
IoBase_3  = "0x180",384
IoBase_4  = "0x1C0",448
IoBase_5  = "0x200",512
IoBase_6  = "0x240",576
IoBase_7  = "0x280",640
IoBase_8  = "0x2C0",704
IoBase_9  = "0x300",768
IoBase_10  = "0x340",832
IoBase_11  = "0x380",896
IoBase_12  = "0x3C0",960
IoBase_13  = "0x400",1024
IoBase_14  = "0x440",1088
IoBase_15  = "0x480",1152
IoBase_16  = "0x4C0",1216
IoBase_17  = "0x500",1280
IoBase_18  = "0x540",1344
IoBase_19  = "0x580",1408
IoBase_20  = "0x5C0",1472
IoBase_21  = "0x600",1536
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2026 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web2, load: 2.44