The firmware C100 of SC-152L(WindowsXP)
** Caution: this firmware is applied to SC-152LE or SC-152L_DOM.
How to upgrade the firmware.
1. Download the SC-152L_C100.zip in (C:)drive.
2. Unzip it by Winzip Program, and you can find files such as ''F1198L.EXE' and 'C100.hex',
3. Reboot the PC and go to Dos mode.
( While OS passes from BIOS to Hard DISC, please keep pressing F8,
and you can find the START UP MENU -> Dos prompt mode/ command com promptly only.)
4. Run 'F1198L.EXE', and you can find the option as below.
2 -> PRIMARY SLAVE
3 -> SECONDARY MASTER
4 -> SECONDARY SLAVE
¡ØPlease check the CD-ROM connection.
R stands for Reading.
W stands for Writing.
5. After you check the option, type as belows.
EX) f1198l 3 w C100.hex
6. If there's a message that download is completed, power the Pc off.
(Caution: not to click "Ctrl + Alt + Del " )
7. You can check the upgraded firmware version in device manager.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.