1. 500_1201.EXE Driver
2. README.TXT File Contents

README.TXT Driver File Contents (500_1201.EXE)

        D-Link PCI Fast Ethernet Adapter Installation
                    for Windows 95

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

    The Windows 95 installation disks or CD are need to complete this
    install.


    Using PCI driver
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
      To Install WIN95 Driver, in order to ensure the INF file will be
       searched first by WIN95 system, please run PUTINF.BAT first in
       Windows95 DOS prompt.

      PUTINF.BAT will to do below step 1-6 procedure.

       Ex. > PUTINF.EXE C:\WINDOWS      ; C:\WINDOWS is Windows 95
                                        ; default directory.

        1. In Windows 95, go to the \Windows\INF\ directory.

        2. Remove the old NETDLPCI.INF file (if it exists).

        3. Create a temporary directory and copy all the files from the
           \Windows\INF\ directory to this temporary directory.

        4. Delete all the files (*.INF) in the \Windows\INF\ directory.

        5. Copy the new NETINF.INF into \Windows\INF\NETDLPCI.INF
           directory.

        6. Now copy all the files back from the temporary directory you
           created to the \Windows\INF\ directory.

      NETDLPCI.INF should now be the first one in Windows directory sees
       in the loading process, and should be loaded before any others for
       the same LAN controller.

      Remove any adapter item from the Network Control Panel for any
       adapters that are no longer in the system.

      Shut down the system, remove the old adapter, install the new
       adapter, and turn on the system.

      Watch WIN95 auto-detect the hardware, and select correct new
       driver to be installed. If not, you may select the "Have Disk"
       option for installation, in which case you will be prompted to
       input the path where the driver located:
            A:\         (assume the driver locate at A:\)
            C:\WIN95    (assume the driver locate at C:\WIN95)

     Complete the installation.

     After this automatic process, Windows 95 should proceed to complete
      boot up process and your network adapter should work normally.


 Trouble Shooting
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

      Everything is OK in Device Manager, but network adapter still
       does't function properly. Please make sure that your Computer
       name is different from others in the same network.  You can change
       your Computer name in

       "My Computer" -> "Control Panel" -> "Network" -> "Identification"
       icons

      Everything appears to be OK but network adapter still doesn't
       function properly. Please make sure that the adapter is properly
       connected to a network device (ex: HUB) and the "connection type"
       for this adapter is set to "AutoSense" or the correct media type.
       You can check it in

       "My Computer" -> "Control Panel" -> "Network" -> "Properties"
       icons. Select "Advanced" item.


 Driver keywords
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

      Open "My Computer" -> "Control Pannel" -> "Network" ->
       Double click "D-Link DFE-500TX PCI ..", Select "Advanced" item.

       Connection Type      Specify the connection type for the adapter.
                            Default: AutoSense

       Network Address      You can set the Ethernet address for your
                            adapter. It is not recommended to use this
                            keyword. As you know two or more adapter in
                            the same network with same Ethernet address
                            will cause a little problem.

                            When using this keyword you need to input
                            exactly 6 bytes of Ethernet address using
                            one of the following format:

                              xx-xx-xx-xx-xx-xx
                            OR
                              xxxxxxxxxxxx

                            Default: read address from adapter ROM.