1. 500_1201.EXE Driver
2. README.TXT File Contents

README.TXT Driver File Contents (500_1201.EXE)

             D-Link PCI Fast Ethernet Adapter Packet Drivers
                        Installation Overview

 User's Guide
 ÄÄÄÄÄÄÄÄÄÄÄÄ

    File            Description
    ------------    -----------------------------------------------------
    PCNFS.TXT       Sun PC-NFS installation document
    PCTCP.TXT       FTP PC/TCP installation document
    PDIPX.TXT       IPX SHELL installation document
    NCSA.TXT        NCSA installation document
    WINSOCK.TXT     Winsock installation document

    DEVICE = DLKPCI.SYS [/option] <packet_int_no>
    DLKPCI.COM [/option] <packet_int_no>

    Packet Driver Parameters:


        <packet_int_no> is the software interrupt vector number used by
                        the packet driver program, which can be from
                        96 to 128.

                        Note: <packet_int_no> can be hex or decimal
                              number.
                              hex - start with '0x'.
                                ex. >DLKPCI 0x62
                              dec - start with nonzero digit.
                                ex. >DLKPCI 98

        </slot=##>      is the number of assigned slot,which is from 1
                        to f.

                        Note: '##' can be hex number only.
                              ex:>DLKPCI /slot=1
                                 >DLKPCI /slot=2
                                 >DLKPCI /slot=f

        </d>            Delay Initial - The driver program will not
                        initialize the network interface card until the
                        packet driver program is accessed by its upper
                        layer program first time.

        </w>            the /w parameter is for use with the Windows
                        environment only.

        </u>            is to unload the driver program from memory.
                        The program will automatically search for Packet
                        driver to unload.

        </n>            NetWare conversion

     To select media type, you can use :

        </autosense>    this is the default setting. It let you able to
                        change media without restart the driver.

        </tp>           Force the driver to select Twisted Pair interface.


        </tp_full_duplex>
                        Select Twisted Pair interface running in full
                        duplex mode.

        </tp_no_link_test>
                        Select Twisted Pair interface. Transmit does not
                        perform link pulses test.

     To select line speed, you can use :

        </line_speed=###>
                        Select Line Speed. Which can be 10 or 100
                        (10MB or 100MB).


     Note: In DFE-500TX adapter, 'line_speed' parameter must be used with
           media selection (/tp or /tp_full_duplex). Ortherwise the driver
           does not know which media (half duplex or full duplex) to work
           with.


How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.