NCSA.TXT Driver File Contents (500TX_C5.EXE)

  D-Link PCI Fase Ethernet Adapter Packet Driver Installation for NCSA


 Getting Started
 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
    The First Step :

    Loading driver via two methods :

    METHOD 1:
    ÄÄÄÄÄÄÄÄ
     If the DLKPCI.SYS program is used, the following statement must be
      included in your CONFIG.SYS file:

       DEVICE = DLKPCI.SYS [/option] <packet_int_no>

      See \PKTDRV\README.TXT for addition parameters

      You can place this line anywhere in the CONFIG.SYS file.

    METHOD 2:
    ÄÄÄÄÄÄÄÄÄ
     If the DLKPCI.COM program is used, follow these steps:

     Execute DLKPCI.COM by typing:

          >DLKPCI [/option] <packet_int_no>

      See \PKTDRV\README.TXT for addition parameters

    The Secondry Step:

     First, you need to install NCSA TCP/IP distributions into your

      machines. See also NCSA TCP/IP distributions \INSTALL for detail

      informations.

     Please set correct values in CONFIG.TEL which is included in NCSA
      TCP/IP distributions as followings:

      in CONFIG.TEL
            :
            :
         hardware    = packet
            :
            :

      These values must the same as driver's parameters.

     NCSA TCP/IP associated programs are ready to used

      See also NCSA TCP/IP distributions \INSTALL for detail informations

    Examples:

      > DLKPCI.COM 0x62

      > EDIT CONFIG.TEL
            :
        hardware     = packet
            :

      > TELNET <IP_ADDRESS>

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.56