NT40.TXT Driver File Contents (500TX_C5.EXE)

           D-Link PCI Fast Ethernet Adapter Installation
                      for Windows NT V4.0

 Getting Started

     Start your Windows NT 4.0 PC normally and inserting the network
      adapter into your computer.

     Open "My Computer" -> "Control Panel" -> "Networks" icons.

     Select "Add adapter" -> "Have disk" items.
      Type the following (assume the driver is located at A:\)


      Select the "D-Link DFE-500TX PCI Fast Ethernet Adapter...".

     Windows NT 4.0 will copy the driver files from the driver disk.
      It also will pop up the configuration window, you can assign the
      "Connection Type" and "Network Address" here.

     After finishing file copy, Windows NT 4.0 will ask you to reboot the PC.
      Select YES.

     Restart the computer.

    Driver keywords:

     Open "My Computer" -> "Control Pannel" -> "Network" ->
      Double click "D-Link DFE-500TX PCI Fast Ethernet Adapter..."

      Connection Type      Specify the connection type for the adapter.
                           Default: AutoSense

      Network Address      You can set the Ethernet address for your adapter.
                           It is not recommended to use this keyword. Please
                           use default value if possible.
                           As you know two or more adapter in the same network
                           with same Ethernet address will cause a little

                           When using this keyword you need to input exactly
                           6 bytes of Ethernet address using one of the
                           following format:


                           Default: read address from adapter ROM.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.02