IBMLAN.TXT Driver File Contents (500TX_C5.EXE)

        D-Link PCI Fast Ethernet Adapter Installation
             for IBM LAN Support and LAN Services
 

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

    Installation for IBM Lan Support 1.3x (see below for Lan Services 4.x)
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

    Please use Method 1 or 2 for this installation

    Method 1
    ÄÄÄÄÄÄÄÄ
      Using the .NIF file:

         Insert the LAN Support diskette into Drive A.

         Run the install program.

          A:\> DXMAID [Enter]

         The following message then appears:

          "Do you have driver diskettes?"  [Yes]

          (You can press [Space] to switch between No and Yes.)

         After copying LAN Support, specify the drive and path of the
          DOS NDIS files reside.

          For example: A:\NDIS2\DOS [Enter]

         The installation procedure terminates after the necessary
          files are copied.

    Method 2
    ÄÄÄÄÄÄÄÄ
      Modifying the contents of the CONFIG.SYS and PROTOCOL.INI files
      after installing other NICs

         Copy the DLKPCI.DOS file to the directory where your IBM LAN
          Support program resides.

         Modify the NDIS device driver statement in the CONFIG.SYS as
          below:

          DEVICE = [drive]:\path\DLKPCI.DOS

         Modify the PROTOCOL.INI file as below:

          BINDINGS = DLKPCII_NIF
               :
               :
          [DLKPCII_NIF]
          DRIVERNAME = DLKPCI$


    IBM LAN Services v4.x installation instructions
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

     Execute the installation program from the IBM DOS LAN SERVICES
      diskette.

        Type: >a:\install

     From the Network card field, select
      "Network card not shown in list below...".

     Specify the path for the corresponding oemsetup.inf file of the OEM
      driver intended for use.  Then, press Enter. The program then
      displays the driver name.

        Ex. A:\NDIS2\DOS

     Check that the driver configuration is correct or not.

     Complete the installation, restart your system to use the DOS
      LAN Services.



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.01