1. SN2000CT.EXE Driver
2. PDIPX.TXT File Contents

PDIPX.TXT Driver File Contents (SN2000CT.EXE)

 Support Publishing       \PKTDRV\PDIPX.TXT

           Ether SN2000 Ethernet Adapter Packet Driver Installation
                   for IPX SHELL

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
    There are two methods for running the IPX SHELL program. They are
    described below.

    METHOD 1:
    ÄÄÄÄÄÄÄÄ
         If the SN2000.SYS program is used, the following statement must be
          included in your CONFIG.SYS file:

                DEVICE = SN2000.SYS [/option] <packet_int_no>

          <packet_int_no> is the software interrupt vector number used
                          by the packet driver program. This can be from
                          96 to 128.

          /d              Delay Initial - The driver program will not
                                          initialize the network interface card
                                          until the packet driver program is
                                          accessed by its upper layer program.

          /w              The /w parameter is for use only in the Windows
                                          environment.

          See \PKTDRV\README.TXT for addition parameters

          You can place this line anywhere in the CONFIG.SYS file.

         Modify the content of AUTOEXEC.BAT to add DPDIPX statement:

                >DPDIPX
                >NETX
                ><change to last driver>
                >LOGIN <username>

    METHOD 2:
    ÄÄÄÄÄÄÄÄÄ
         If the SN2000.COM program is used, follow these steps:

         Execute SN2000.COM by typing:

                >SN2000 [/option] <packet_int_no>
                >DPDIPX
                >NETX
                ><change to last driver>
                >LOGIN <username>

          <packet_int_no> is the software interrupt vector number used by the
                          packet driver program. This can be from 96 to 128.

          /d              Delay Initial - The driver program will not initialize
                          the network interface card until the packet driver
                          program is accessed by its upper layer program.

          /w              The -w parameter is for use only in the Windows
                          environment.

          See \PKTDRV\README.TXT for addition parameters


How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.