1. SN2000CT.EXE Driver
2. PCTCP.TXT File Contents

PCTCP.TXT Driver File Contents (SN2000CT.EXE)

Ether Support Publishing       \PKTDRV\PCTCP.TXT

           Ether SN2000 Ethernet Adapter Packet Driver Installation

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
    Two methods can be used:

    METHOD 1:
    ÄÄÄÄÄÄÄÄ
     If the SN2000.SYS program is used, the following statement must be
      included in your CONFIG.SYS file:

            DEVICE = SN2000.SYS [/option] <packet_int_no>

      <packet_int_no> is the software interrupt vector number used
                      by the packet driver program. This can be from
                      96 to 128.

      /d              Delay Initial - The driver program will not initialize
                      the network interface card until the packet driver
                      program is accessed by its upper layer program.

      /w              The /w parameter is for use only in the Windows
                      environment.

      See \PKTDRV\README.TXT for addition parameters

      You can place this line anywhere in the CONFIG.SYS file.

    METHOD 2:
    ÄÄÄÄÄÄÄÄÄ
     If the SN2000.COM program is used, follow these steps:

     Execute SN2000.COM by typing:

            >SN2000 [/option] <packet_int_no>

      <packet_int_no> is the software interrupt vector number used by the
                      packet driver program. This can be from 96 to 128.

      /d              Delay Initial - The driver program will not initialize
                      the network interface card until the packet driver
                      program is accessed by its upper layer program.

      /w              The -w parameter is for use only in the Windows
                      environment.

      See \PKTDRV\README.TXT for addition parameters

     Execute the ETHDRV.EXE and IDRIVE.EXE device driver programs.
      These programs are provided by FTP.

     FTP's PC/TCP and associated programs are ready to used


How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.