Ether Support Publishing \NETWARE\NW312.TXT
Ether SN2000 Ethernet Adapter Installation
for the NetWare Server 3.12 Driver
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Copy the SN2000.LAN file from the <PATH>\SN2000.lan directory into the
subdirectory of your server. Type:
>copy <PATH>\SN2000.lan \NW312
; if NW312 is the server subdirectory
; <PATH> is the path where SN2000.lan resides. If the autoinstall
was used <PATH>=\SRV312.
Copy all provided NLM files into your server directory. Type:
>copy <PATH>\*.NLM \NW312
Run SERVER.EXE on the server.
Edit the AUTOEXEC.NCF file as follows:
:load install
Select <System Option>
Select <Edit Autoexec.NCF file>
Modify the server's AUTOEXEC.NCF as follows:
load C:\NW312\MSM.NLM
load C:\NW312\ETHERTSM.NLM
load C:\NW312\SN2000.LAN
bind ipx to SN2000 net=xxxx ;xxxx is the network # ie. 33
Press Esc after editing.
Select "Yes" to save.
Select "Exit" to exit installation.
Shut down the server and then turn it ON again.
The driver is now installed and running.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.