1. SN5000TX.EXE Driver
2. WIN95.TXT File Contents

WIN95.TXT Driver File Contents (SN5000TX.EXE)

        SN5000TX Fast Ethernet Adapter Installation
                    for Windows 95


 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

     Start your Windows 95 PC normally with inserting the
      network adapter into your computer.

     Open "My Computer" -> "Control Panel" -> "Networks" icons.

     Select "Add adapter" -> "Have disk" items.
      Type the following (assume the driver is located at C:\WIN95)

            C:\WIN95

      Select the correct driver according to your adapter type.

     Windows 95 will copy the driver files from the SN5000TX driver disk.
      At this monent, Windows 95 will also copy the necessary files from
      the Windows 95 CD-ROM. Prepare your Windows 95 CD-ROM or floppies
      for this process.

     After finishing file copy, Windows 95 will ask you to reboot the PC.
      Select YES.

     Restart the computer. If you have not installed the adapter, turn off
      your computer and install the network adapter.

     During Windows 95 bootup, Windows 95 will automatically detect the
      network adapter.  You don't have to do anything at this point.

     After this automatic process, Windows 95 should proceed to complete
      boot up process and your network adapter should work normally.

     If the adapter does not work at this point, check the adapter
      under Device Manager:

            Open "My Computer" -> "Control Panel" -> "System" icons
            select  "Device Manager" tab.  Select "View devices by type",
            highlight the PCI network adapter, then select properties.
            If there are any problems, there will be a message under
            "Device status".


 Trouble Shooting
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

      Everything is OK in Device Manager, but network adapter still does't
       function properly. Please make sure that your Computer name is
       different from others in the same network.  You can change your
       Computer name in

       "My Computer" -> "Control Panel" -> "Network" -> "Identification" icons

      Everything appears to be OK but network adapter still doesn't function
       properly. Please make sure that the adapter is properly connected to a
       network device (ex: HUB) and the "connection type" for this adapter is
       set to "AutoSense" or the correct media type. You can check it in

       "My Computer" -> "Control Panel" -> "Network" -> "Properties" icons
       Select "Advanced" item


 Driver keywords
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

      Open "My Computer" -> "Control Pannel" -> "Network" ->
       Double click "SN5000TX Fast Ethernet ..." ->
       Select "Advanced" item.

       Connection Type      Specify the connection type for the adapter.
                            Default: AutoSense

       Network Address      You can set the Ethernet address for your adapter.
                            It is not recommended to use this keyword.
                            As you know two or more adapter in the same network
                            with same Ethernet address will cause a little
                            problem.

                            When using this keyword you need to input exactly
                            6 bytes of Ethernet address using one of the
                            following format:

                              xx-xx-xx-xx-xx-xx
                            OR
                              xxxxxxxxxxxx

                            Default: read address from adapter ROM.