1. SN5000TX.EXE Driver
2. README.TXT File Contents

README.TXT Driver File Contents (SN5000TX.EXE)

           SN5000TX Fast Ethernet Adapters NetWare Drivers
                      Installation Overview

 Contents
 ÍÍÍÍÍÍÍÍ
     Introduction
     User's Guide

 Introduction
 ÍÍÍÍÍÍÍÍÍÍÍÍ
    The PCI Family NetWare driver programs provided in this diskette.
    For installation information for various systems, please refer to the
    appropriate text file listed below.  These files are included in this
    diskette.

        File                Description
    ------------    ------------------------------------------------
    DOSODI.TXT      NetWare DOS Client installation document
    NW312.TXT       NetWare 3.12 Server installation document
    NW4XX.TXT       NetWare 4.x Server installation document
    CLIENT32.TXT    Client32 for DOS/Windows 3.1x, Windows 95
                    installation document
    PRSNLNW.TXT     Personal Netware installation document

 Keywords supported by SN5000.COM and %dlk03.LAN
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

      AUTOSENSE       - This keyword performs power-up autosense on all
                        types of boards in order to connect to the active
                        line, and dynamic media autosensing (at run-time)
                        on boards supporting it. Without specifying any
                        keyword this one will be used as default one.

      10BASET         - This keyword force media type to be 10Mbps half 
                        duplex, and disable power-up autosense.

      10BASETFD       - This keyword force media type to be 10Mbps full
                        duplex, and disable power-up autosense.

      100BASETX       - This keyword force media type to be 10M0bps half 
                        duplex, and disable power-up autosense.

      100BASETXFD     - This keyword force media type to be 10Mbps full
                        duplex, and disable power-up autosense.

 NET.CFG for Netware Client
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
    The following lists the available NET.CFG keywords for the ODI device
    drivers. Most of these keywords are optional and use respective
    default values.

    NET.CFG
    ÄÄÄÄÄÄÄ

    Protocol IPX
    Bind #1

    Link Driver SN5000
    frame Ethernet_802.3
;   frame Ethernet_802.2
;   frame Ethernet_II
;   frame Ethernet_SNAP

    Protocol IPX 00 Ethernet_802.3
;   Protocol IPX E0 Ethernet_802.2
;   Protocol IPX 8137 Ethernet_II

    AUTOSENSE               ; Auto-select media type and line speed
;   10BASET                 ; Force media type to be 10Mbps half duplex
;   10BASETFD               ; Force media type to be 10Mbps full duplex
;   100BASETX               ; Force media type to be 100Mbps half duplex
;   100BASETXFD             ; Force media type to be 100Mbps full duplex


 AUTOEXEC.NCF for Netware Server
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
    The following lists the available keywords for the device drivers for
    Netware Server. Most of these keywords are optional and use respective
    default values.

    AUTOEXEC.NCF
    ÄÄÄÄÄÄÄÄÄÄÄÄ

;/* 
; * load device driver with 802.3 frame and do autosense on loading 
; */
    LOAD SN5000 SLOT=1 FRAME=Ethernet_802.3 NAME=SN5000_1_E83
    BIND IPX SN5000_1_E83 NET=xxxx

;/* 
; * load device driver with 802.3 frame and force media type to 
; * 10Mbps half duplex and disable autosense on loading 
; */
;   LOAD SN5000 SLOT=1 10BASET FRAME=Ethernet_802.3 NAME=SN5000_1_E83
;   BIND IPX SN5000_1_E83 NET=xxxx
;/* 
; * load device driver with 802.3 frame and force media type to 
; * 10Mbps full duplex and disable autosense on loading 
; */
;   LOAD SN5000 SLOT=1 10BASETFD FRAME=Ethernet_802.3 NAME=SN5000_1_E83
;   BIND IPX SN5000_1_E83 NET=xxxx
;/* 
; * load device driver with 802.3 frame and force media type to 
; * 100Mbps half duplex and disable autosense on loading 
; */
;   LOAD SN5000 SLOT=1 100BASETX FRAME=Ethernet_802.3 NAME=SN5000_1_E83
;   BIND IPX SN5000_1_E83 NET=xxxx
;/* 
; * load device driver with 802.3 frame and force media type to 
; * 100Mbps full duplex and disable autosense on loading 
; */
;   LOAD SN5000 SLOT=1 100BASETXFD FRAME=Ethernet_802.3 NAME=SN5000_1_E83
;   BIND IPX SN5000_1_E83 NET=xxxx

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.