DRV_ROC.INF Driver File Contents (TURBOCOMM_NT.ZIP)

;-------------------------------------------------------------------------------
;       The file must contain a Version section with a Signature= entry. 
;
;       The SetupNtDriverInfFile=<anything> entry identifies this as a "drv_roc" 
;       file, which allows the user to rename the file. This is a coding trick. The 
;       setup program looks for drv_roc.inf. If there is no such file, the setup 
;       program scans all *.INF files, stopping at the first.
;
;       Note: the setup program only runs on Windows NT, version 4
;-------------------------------------------------------------------------------

[Version]
Signature="$WINDOWS NT$"
SetupNtDriverInfFile=drv_roc.inf
MMX_Required=

;-------------------------------------------------------------------------------
;       The file must contain a Strings section, with DriverName= and 
;       UninstallRegistryKey= entries.
;
;       DriverName - the exact name of the device driver file, without extension
;       UninstallRegistryKey - the exact registry key for uninstallation
;
;       The following strings are used only in the INF file
;
;       EventLogRegistryValue - instructions for event logging
;       ModemName - default display name for the modem
;       rksample_root - hokey HSF driver stuff
;-------------------------------------------------------------------------------

[Strings]
DriverName="WinAcHsf"
UninstallRegistryKey="Software\Microsoft\Windows\CurrentVersion\Uninstall"
EventLogRegistryValue="%SystemRoot%\System32\IoLogMsg.dll;%SystemRoot%\System32\drivers\winachsf.sys"
ModemName="Conexant PCI Modem"

;-------------------------------------------------------------------------------
;       The file must contain a Models section, with entries for each modem to
;       install or uninstall. NAME and SECTION are required for all types of
;       modem. PNPID is required for "PCI\" - style matches, at this time only
;       HSF uses this to match this file to the appropriate INF file.
;
;       [Models]
;       NAME = SECTION, PNPID
;-------------------------------------------------------------------------------

[Models]
%ModemName%=DataFax, PCI\RSSI4311

[DataFax]
AddReg=DriverRegistry, UninstallRegistry
CopyFiles=InstallFiles, CsaAppletFiles, UninstallFiles, DriverFiles, InfFiles

;-------------------------------------------------------------------------------
; PciVendorID - 0x14F1 Conexant, 0x127A Rockwell, defaults to 127A
; PciDeviceID - board family to match, defaults to 0x1000
; PciDeviceIDMask - significant bits of PciDeviceID, defaults to 0xF000
; PciSubsystemVendorID - must match the board, 0 for "any", defaults to 0
; PciSubsystemID - must match the board, 0 for "any", defaults to 0
; SymbolicLink - the COM port for your installation
;-------------------------------------------------------------------------------

[DriverRegistry]
HKR, Parameters\%DriverName%0, SymbolicLink,,"COM3"
HKR, Parameters\%DriverName%0, PciVendorID,          0x40001, 0x0000
HKR, Parameters\%DriverName%0, PciDeviceID,          0x40001, 0x2000

;-------------------------------------------------------------------------------
; DisplayName shows up in the control panel add/remove programs applet
; UninstallString is the command line invoked by that applet to do the uninstall
;-------------------------------------------------------------------------------

[UninstallRegistry]
HKLM,%UninstallRegistryKey%\%DriverName%
HKLM,%UninstallRegistryKey%\%DriverName%, DisplayName,,"%ModemName% (Uninstall)"
HKLM,%UninstallRegistryKey%\%DriverName%, UninstallString,,%10%\%DriverName%\setup -u"

;-------------------------------------------------------------------------------
; Files to be copied - where they are copied is specified in [DestinationDirs]
;-------------------------------------------------------------------------------

[InstallFiles]
drv_roc.inf
;mdm_roc.inf
CNX2014.inf
CNX2015.inf
CTR2014.inf
CTR2015.inf
setup.exe

[CsaAppletFiles]
csacpl.cpl

[UninstallFiles]
isdel.exe

[DriverFiles]
winachsf.sys
amosnt.sys
tonesnt.sys
v124nt.sys
rksample.sys
Basic2.sys
fallback.sys
FSKsNT.sys
Faxnt.sys
k56nt.sys
spkpnt.sys

[InfFiles]
;mdm_roc.inf
CNX2014.inf
CNX2015.inf
CTR2014.inf
CTR2015.inf

;-------------------------------------------------------------------------------
; Required Entry - the installer reads these to add the driver to the system
;       [SECTION.Services] - SECTION is the link from the [Models] entry
;       AddService = service-name, flag, service-install-section, eventlog-section
;-------------------------------------------------------------------------------

[DataFax.Services]
AddService=%DriverName%,0,DriverService,DriverEventLog
AddService=AmosNT,0,svc_amos,DriverEventLog
AddService=Tones,0,svc_tones,DriverEventLog
AddService=V124,0,svc_v124,DriverEventLog
AddService=RKSAMPLE,0,svc_rksample,DriverEventLog
AddService=Basic2,0,svc_basic2,DriverEventLog
AddService=Fallback,0,svc_fallback,DriverEventLog
AddService=Fax,0,svc_fax,DriverEventLog
AddService=Fsks,0,svc_fsks,DriverEventLog
AddService=K56Flex,0,svc_k56flex,DriverEventLog
AddService=Spkphone,0,svc_spkphone,DriverEventLog

[DriverService]
ServiceType   = 1                         ; must be 1, kernel mode driver
StartType     = 2                         ; 0=boot,1=system,2=automatic,3=manual
ErrorControl  = 0                         ; 0=ignore,1=normal,2=severe,3=critical
ServiceBinary = %12%\%DriverName%.sys     ; winnt\system32\drivers\driver.sys, exactly

[svc_amos]
ServiceType=1
StartType=2
ErrorControl=0
ServiceBinary=%12%\amosnt.sys

[svc_tones]
ServiceType=1
StartType=2
ErrorControl=0
ServiceBinary=%12%\Tonesnt.sys

[svc_v124]
ServiceType=1
StartType=2
ErrorControl=0
ServiceBinary=%12%\v124nt.sys

[svc_rksample]
ServiceType=1
StartType=2
ErrorControl=0
ServiceBinary=%12%\rksample.sys

[svc_basic2]
ServiceType=1
StartType=2
ErrorControl=0
ServiceBinary=%12%\Basic2.sys

[svc_fallback]
ServiceType=1
StartType=2
ErrorControl=0
ServiceBinary=%12%\fallback.sys

[svc_fsks]
ServiceType=1
StartType=2
ErrorControl=0
ServiceBinary=%12%\fsksnt.sys

[svc_fax]
ServiceType=1
StartType=2
ErrorControl=0
ServiceBinary=%12%\faxnt.sys

[svc_k56flex]
ServiceType=1
StartType=2
ErrorControl=0
ServiceBinary=%12%\k56nt.sys

[svc_spkphone]
ServiceType=1
StartType=2
ErrorControl=0
ServiceBinary=%12%\spkpnt.sys

;-------------------------------------------------------------------------------
; How the driver reports system event log entries
;       AddReg defines how to expose the error messages to the system
;       DelReg tells the un-installer how to remove them
;-------------------------------------------------------------------------------

[DriverEventLog]
AddReg=DriverEventLogRegistry
DelReg=DriverEventLogRegistry

[DriverEventLogRegistry]
HKR,,EventMessageFile, 0x00020000, %EventLogRegistryValue%
HKR,,TypesSupported, 0x00010001,7

;-------------------------------------------------------------------------------
; Required Entry - the un-installer reads this to remove the modem later,
;       [SECTION.Uninstall] - SECTION is the link from the [Models] entry
;       DelFiles = file-section, file-section,...
;       DelReg  = reg-section, reg-section,...
;-------------------------------------------------------------------------------

[DataFax.Uninstall]
DelFiles=CsaAppletFiles, DriverFiles, InfFiles, PnfFiles
DelReg=UninstallRegistry

[PnfFiles]
;mdm_roc.pnf
CNX2014.pnf
CNX2015.pnf
CTR2014.pnf
CTR2015.pnf


;-------------------------------------------------------------------------------
; Required Entry - the un-installer reads these to remove the driver
;       [SECTION.Uninstall.Services] - SECTION is the link from the [Models] entry
;       DelService = driver-service-name (must be the same as in AddService)
;-------------------------------------------------------------------------------

[DataFax.Uninstall.Services]
DelService=%DriverName%
DelService=AmosNT
DelService=Tones
DelService=V124
DelService=RKSAMPLE
DelService=Basic2
DelService=Fallback
DelService=Fsks
DelService=Fax
DelService=K56Flex
DelService=Spkphone

;-------------------------------------------------------------------------------
; Required Entry - one entry for each file that **must** be copied
;       filename = disk-number[,subdir][,size]
;-------------------------------------------------------------------------------

[SourceDiskFiles]
csacpl.cpl   = 1        ; country selection applet
drv_roc.inf  = 1        ; instructions for install and un-install (this file)
;mdm_roc.inf  = 1       ; modem description
CNX2014.inf = 1
CNX2015.inf = 1
CTR2014.inf = 1
CTR2015.inf = 1
setup.exe    = 1        ; installer                                          
isdel.exe    = 1        ; removes all traces of the un-installer, including itself
winachsf.sys = 1        ; modem driver

;-------------------------------------------------------------------------------
; Required Entry - matched to the [sections] listed above
;       file-list-section = drid[,subdir]
;-------------------------------------------------------------------------------

[DestinationDirs]
InstallFiles   = 10,%DriverName%   ; winnt\<driver-name>
CsaAppletFiles = 11                ; winnt\system32
UninstallFiles = 11                ; winnt\system32
DriverFiles    = 12                ; winnt\system32\drivers
InfFiles       = 17                ; winnt\inf
PnfFiles       = 17                ; winnt\inf

;-------------------------------------------------------------------------------
; Required Entry
;       ordinal = "disk-description", tag-file, unused, [absolute-path]
;-------------------------------------------------------------------------------

[SourceDisksNames]
1="%ModemName% Drivers Disk","setup.exe",1
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.46