; ; Purpose: Netcard setup information file for Windows NT 3.51 / NT 4.0 ; ; Author: Tevin Chen ; ; Date: May, 2001 ; [Identification] OptionType = NetAdapter [PlatformsSupported] PCI [Options] ; VT3043/VT3065 based Fast Ethernet Adapter (Controller) FET [PropertiesFET] Property_1 = "ConnectionType", + "Connection Type", + "0,1,2,3,4", + "Auto-Negotiation,100BaseTx Half Duplex,100BaseTx Full Duplex,10BaseT Half Duplex,10BaseT Full Duplex", + "enum" Property_2 = "ValidatePacketLen", + "Validate Packet Length", + "0,1", + "Disabled,Enabled", + "enum" Property_3 = "NetworkAddress", + "Network Address", + "", + "", + "edit" Property_4 = "TransmitBuffers", + "Transmit Buffers", + "4,128", + "", + "int" Property_5 = "ReceiveBuffers", + "Receive Buffers", + "4,128", + "", + "int" ;============================================================================ [FileConstants] UtilityInf = "UTILITY.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "VIA Technologies, Inc." ; Driver Version info ; VERSION.... 2.64 ProductMajorVersion = "2" ProductMinorVersion = "64" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ; DEVICE_ID.... ; (0x1106 == 4358) VendorID = 4358 ProductSoftwareName = "FETNDIS" ProductSoftwareTitle = "PCI 10/100Mb Fast Ethernet Adapter Driver" NT4Driver = "fetnd4.sys" NT351Driver = "fetnd3.sys" ProductSoftwareImagePathNT4 = "\SystemRoot\System32\drivers\"$(NT4Driver) ProductSoftwareImagePathNT351 = "\SystemRoot\System32\drivers\"$(NT351Driver) NetRuleSoftwareType = "FETSys ndisDriver FETDriver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """FETSys"" yes no container" NetRuleSoftwareClass = {"FETDriver basic"} NetRuleSoftwareSWBindable = {"FETDriver FETAdapter non exclusive 100"} HelpFileName = "fetndh.hlp" ProductHardwareName = "FETNDIS" ProductHardwareFETVT3065Title = "VIA PCI 10/100Mb Fast Ethernet Adapter" ProductHardwareFETVT3043Title = "VIA VT86C100A Fast Ethernet Adapter" ProductHardwareFETDescription = "PCI 10/100Mb Fast Ethernet Adapter" NetRuleHardwareFETType = "FET FETAdapter" NetRuleHardwareFETClass = {"FETAdapter basic"} AdapterFETType = 5 ;; PCI board HelpFETId = 30 ; DEVICE_ID.... ; VT3043 (0x30431106 == 809701638) VT3043CFID = 809701638 ; VT3065 (0x30651106 == 811929862) VT3065CFID = 811929862 NetRuleHardwareBindForm = " yes yes container" ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" ;============================================================================ [GeneralConstants] Sub = "" from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers NT351Version = "3.51" NT40Version = "4.0" ;============================================================================ [date] Now = {} ? $(!LIBHANDLE) GetSystemDate ;============================================================================ [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) ;============================================================================ [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif ;---------------------------------------------------------------------------- returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL ;---------------------------------------------------------------------------- finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) ;============================================================================ [InstallOption] set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants set NetRuleSoftwareBindable = $($R1) read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = "OK" endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(Function$(Option)Title) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait ;---------------------------------------------------------------------------- Begin = + ; Get the version of NT from registry (for NT3.51/NT4.0) set CurrentVersionValue = "" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(!REG_KEY_READ) KeyNt ifstr(i) $(KeyNt) != "" GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue CloseRegKey $(KeyNt) endif set TargetVersion = *($(CurrentVersionValue),4) set TargetOS = "" ifstr $(TargetVersion) == $(NT351Version) set TargetOS = "NT351" else-ifstr $(TargetVersion) == $(NT40Version) set TargetOS = "NT4" else set Error = "This driver does not support Windows NT version "*($(CurrentVersionValue),4)" !" goto fatal endif Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo else set StartLabel = configureadapter endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif set from = $(fatal) set to = $(fatal) goto $(StartLabel) ;---------------------------------------------------------------------------- installadapter = + install "Install-UTIL" OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) != "OK" set CommonStatus = STATUS_USERCANCEL goto end endif set OldVersionExisted = $(TRUE) endif Endif ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) ; HELP.... ;install "Install-Hlp" endif Goto installproduct ;---------------------------------------------------------------------------- configureadapter = + Ifstr(i) $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Goto fatalregistry Endif Endif Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Goto fatalregistry endif set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) ifstr(i) $(ValueName) == "AdapterSubID" set AdapterSub = $(ValueData) endif EndForListDo set CurrKeyValueList = {} ForListDo $(PropertyKeyList) set KeyName = $($) ForListDo $(ValueList) set ValueName = *($($), 1) set ValueData = *($($), 4) ifstr $(ValueName) == $(KeyName) set CurrKeyValueList = >($(CurrKeyValueList), $(ValueData)) endif EndForListDo EndForListDo ;---------------------------------------------------------------------------- adapteroptions = + set from = adapteroptions LoadLibrary "" $(!STF_WINDOWSSYSPATH)"\ntutil.dll" PropHandle LibraryProcedure SetResult, $(PropHandle), ShowProp, $(PropertyList), + $(CurrKeyValueList), + $(KeyValueList), + $(ComboValueList), + $(ValueTypeList), + $(HelpFileName) FreeLibrary $(PropHandle) ifstr $(SetResult) == "PROPERTY_UI_USER_CANCEL" set CommonStatus = STATUS_USERCANCEL goto end endif ifstr $(SetResult) == $(CurrKeyValueList) set CommonStatus = STATUS_USERCANCEL goto end endif ifstr(i) $(!NTN_InstallMode) == configure goto updateparameters endif ;---------------------------------------------------------------------------- installproduct =+ StartWait ; DEVICE_ID.... ; 65535 ; search device ID for 3043 and 3065 set AdapterList65 = {} set AdapterList43 = {} set-div DeviceID = $(VT3043CFID) 65535 Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif LoadLibrary "" $(!STF_WINDOWSSYSPATH)"\ntutil.dll" LibHandle ifstr(i) $($R0) == {} set-div DeviceID = $(VT3065CFID) 65535 Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R0) == {} set Error = $(CANNOT_FIND_ANY_CARD) set CommonStatus = USER_CANCEL set from = end goto nonfatal else set AdapterList65 = $($R0) endif else set AdapterList43 = $($R0) set-div DeviceID = $(VT3065CFID) 65535 Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif Ifstr(i) $($R0) != {} set AdapterList65 = $($R0) Endif endif ifint $(OldVersionExisted) == $(FALSE) Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif ; install help file. In attended mode, system will execute the installation from ; "installproduct" , so, I add another install help here (AJ 3/25/1999) ;install "Install-Hlp" install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), + $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath$(TargetOS)), + "kernel", + "NDIS", + {}, + "", + $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) goto fatalregistry endif Set SoftProductKey = $($R1) Set SoftNetRuleKey = $($R2) Set SoftServiceKey = $($R3) Set SoftParameterKey = $($R4) Set SoftLinkageKey = $($R5) set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait goto fatalregistry endif endif ;---------------------------------------------------------------------------- ifstr(i) $(AdapterList65) == {} goto InstallAdapter43 endif ForListDo $(AdapterList65) set BusNum = *($($),1) set DeviceNum = *($($),2) set FunctionNum = *($($),3) set Sub = "VT3065" Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), + $(DeviceNum), + $(ProductHardware$(Option)$(Sub)Title), + $(ProductHardwareName), + "YES" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) != "YES" Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName), + $(STF_CONTEXTINFNAME), + $(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif ;read-syms FileDependentDlg$(!STF_LANGUAGE) ;SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id) ; support unattended mode installation under windows NT 4.0 (AJ 03/22/1999) ifstr $(!STF_GUI_UNATTENDED) != "YES" ;ui start "InputDlg" ;ifstr(i) $(DLGEVENT) == "CONTINUE" ; set ConnectionIndex = $(Combo1Out) ui pop 1 ;else-ifstr(i) $(DLGEVENT) == "BACK" ; set CommonStatus = STATUS_USERCANCEL ; ui pop 1 ; goto end ;else ; ui pop 1 ; goto end ;endif endif Set HardNetCardKey = $($R1) Set HardNetRuleKey = $($R2) Set HardParameterKey = $($R3) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)$(Sub)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set BusTypeNum = 5 set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(VT3065CFID)}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ; for 3065 registery set NewValueList = {{ReceiveBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+ {TransmitBuffers,$(NoTitle),$(!REG_VT_DWORD),32},+ {ReceiveBurstIndicate,$(NoTitle),$(!REG_VT_DWORD),32},+ {ReceiveThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+ {TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+ {BurstLength,$(NoTitle),$(!REG_VT_DWORD),1},+ {MapRegisters,$(NoTitle),$(!REG_VT_DWORD),32},+ {EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),0},+ {EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),0},+ {ValidatePacketLen,$(NoTitle),$(!REG_VT_DWORD),1},+ {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),"000000000000"},+ {ConnectionType, $(NoTitle),$(!REG_VT_DWORD),0}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(HardNetCardKey) CloseRegKey $(HardNetRuleKey) set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+ {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) CloseRegKey $(HardParameterKey) EndForListDo FreeLibrary $(LibHandle) ifstr(i) $(AdapterList43) == {} goto InstallAdapterOK endif ;---------------------------------------------------------------------------- InstallAdapter43 =+ ForListDo $(AdapterList43) set BusNum = *($($),1) set DeviceNum = *($($),2) set FunctionNum = *($($),3) set Sub = "VT3043" Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), + $(DeviceNum), + $(ProductHardware$(Option)$(Sub)Title), + $(ProductHardwareName), + "YES" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) != "YES" Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif ;read-syms FileDependentDlg$(!STF_LANGUAGE) ;SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id) ; support unattended mode installation under windows NT 4.0 (AJ 03/22/1999) ifstr $(!STF_GUI_UNATTENDED) != "YES" ;ui start "InputDlg" ;ifstr(i) $(DLGEVENT) == "CONTINUE" ; set ConnectionIndex = $(Combo1Out) ui pop 1 ;else-ifstr(i) $(DLGEVENT) == "BACK" ; set CommonStatus = STATUS_USERCANCEL ; ui pop 1 ; goto end ;else ; ui pop 1 ; goto end ;endif endif Set HardNetCardKey = $($R1) Set HardNetRuleKey = $($R2) Set HardParameterKey = $($R3) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)$(Sub)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set BusTypeNum = 5 set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(VT3043CFID)}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ; for 3043 registery set NewValueList = {{ReceiveBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+ {TransmitBuffers,$(NoTitle),$(!REG_VT_DWORD),8},+ {ReceiveBurstIndicate,$(NoTitle),$(!REG_VT_DWORD),32},+ {ReceiveThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+ {TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+ {BurstLength,$(NoTitle),$(!REG_VT_DWORD),1},+ {MapRegisters,$(NoTitle),$(!REG_VT_DWORD),8},+ {EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),0},+ {EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),0},+ {ValidatePacketLen,$(NoTitle),$(!REG_VT_DWORD),1},+ {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),"000000000000"},+ {ConnectionType, $(NoTitle),$(!REG_VT_DWORD),0}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(HardNetCardKey) CloseRegKey $(HardNetRuleKey) set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+ {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) CloseRegKey $(HardParameterKey) EndForListDo ;---------------------------------------------------------------------------- InstallAdapterOK =+ EndWait goto successful ;---------------------------------------------------------------------------- updateparameters =+ ForListDo $(PropertyKeyList) set KeyName = $($) set PropIndex = ~($(PropertyKeyList), $(KeyName)) ifstr *($(SetResult), $(PropIndex)) != *($(CurrKeyValueList), $(PropIndex)) set NewRegValue = *($(SetResult), $(PropIndex)) Ifstr $(KeyName) == "NetworkAddress" set NewValueList = {{$(KeyName),$(NoTitle),$(!REG_VT_SZ),$(NewRegValue)}} Else set NewValueList = {{$(KeyName),$(NoTitle),$(!REG_VT_DWORD),$(NewRegValue)}} Endif shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) Ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError Endif endif EndForListDo goto successful ;---------------------------------------------------------------------------- bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end ;---------------------------------------------------------------------------- UpgradeSoftware = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) else goto fatalregistry endif goto end ;---------------------------------------------------------------------------- successful = + goto end ;---------------------------------------------------------------------------- abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end ;---------------------------------------------------------------------------- warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif ;---------------------------------------------------------------------------- nonfatalinfo = + Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg ;---------------------------------------------------------------------------- nonfatal = + Set Severity = NONFATAL goto nonfatalmsg ;---------------------------------------------------------------------------- nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif ;---------------------------------------------------------------------------- fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal ;---------------------------------------------------------------------------- fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ;---------------------------------------------------------------------------- ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed ;---------------------------------------------------------------------------- setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end ;---------------------------------------------------------------------------- end = + goto term ;---------------------------------------------------------------------------- term = + Return $(CommonStatus) [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option)-$(TargetOS) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit ;---------------------------------------------------------------------------- [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" ; HELP.... AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-$(Option)-$(TargetOS) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-SubID $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-PropUI $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-UTIL] set STF_VITAL = "" set STF_OVERWRITE = "ALWAYS" AddSectionFilesToCopyList Files-SubID $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-PropUI $(SrcDir) $(!STF_WINDOWSSYSPATH) CopyFilesInCopyList ClearCopyList exit [Source Media Descriptions] 1 = "PCI 10/100Mb Fast Ethernet Adapter Driver" [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 STF_PLATFORM = Alpha ;============================================================================ [Files-Inf] 2, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename) [Files-FET-NT4] 1, fetnd4.sys , SIZE=999 [Files-FET-NT351] 1, fetnd3.sys , SIZE=999 [Files-SubID] 1, pcienum.sys , SIZE=999 [Files-PropUI] 1, ntutil.dll , SIZE=999 1, fetndh.hlp , SIZE=999 ;============================================================================ [LanguagesSupported] ENG [OptionsTextENG] FET = "VIA PCI 10/100Mb Fast Ethernet Adapter" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" ProductSoftwareDescription = "PCI 10/100Mb Fast Ethernet Adapter Driver" FunctionFETTitle = "PCI 10/100Mb Fast Ethernet Adapter Setup" ShellCodeErrorTitle = "Error: "$(Function$(Option)Title) ShellCodeErrorText = "Shell Code Error." CANNOT_FIND_ANY_CARD = "Network card is not present in the system" ; Add for New UI **************** PropertyKeyList = ^(Properties$(Option), 1) PropertyList = ^(Properties$(Option), 2) KeyValueList = ^(Properties$(Option), 3) ComboValueList = ^(Properties$(Option), 4) ValueTypeList = ^(Properties$(Option), 5) [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.