; This INF file installs the Silicon Image Serial ATA non-Raid driver for ; SiI 3x12 controllers on systems using 64-bit extended processors. ; ; ; Copyright (C) 2003-2006 by Silicon Image, Inc. ; All rights reserved [Version] Signature="$Windows NT$" Class=SCSIAdapter ClassGuid={4D36E97B-E325-11CE-BFC1-08002BE10318} Provider=%SI% CatalogFile=SI3112.cat DriverVer=10/23/2006, 1.2.13.0 [SourceDisksNames.amd64] 1="Silicon Image SiI 3x12 SATALink Driver Installation Disk",SI3112.inf,\amd64, [SourceDisksFiles.amd64] SI3112.sys = 1 SilSupp.cpl = 1 SiWinAcc.sys = 1 SiRemFil.sys = 1 [DestinationDirs] DefaultDestDir = 12 DllFiles = 11 [DriverFiles] SI3112.sys,,,0x20 SiWinAcc.sys,,,0x20 SiRemFil.sys,,,0x20 [DllFiles] SilSupp.cpl,,,0x20 [Manufacturer] %SI%=SI_HDC,NTamd64 [SI_HDC.NTamd64] %PCI\VEN_1095&DEV_3112.DeviceDesc%=SI_3112_XP, PCI\VEN_1095&DEV_3112&SUBSYS_31121095 %PCI\VEN_1095&DEV_3512.DeviceDesc%=SI_3512_XP, PCI\VEN_1095&DEV_3512&SUBSYS_35121095 %PCI\VEN_1095&DEV_3512.DeviceDesc%=SI_3512_XP, PCI\VEN_1095&DEV_3512&SUBSYS_35121014 %PCI\VEN_1095&DEV_3512.DeviceDesc%=SI_3512_XP, PCI\VEN_1095&DEV_3512&SUBSYS_02B71014 %PCI\VEN_1095&DEV_3512.DeviceDesc%=SI_3512_XP, PCI\VEN_1095&DEV_3512&SUBSYS_145A1462 %PCI\VEN_1095&DEV_3512.DeviceDesc%=SI_3512_XP, PCI\VEN_1095&DEV_3512&SUBSYS_001F6409 %PCI\VEN_1095&DEV_3512.DeviceDesc%=SI_3512_XP, PCI\VEN_1095&DEV_3512&SUBSYS_35121A5F [ControlFlags] ExcludeFromSelect.ntx86=* ;; Driver install sections ;; [SI_3112_XP.NTamd64] Copyfiles=DriverFiles, DllFiles [SI_3112_XP.NTamd64.Services] AddService=SI3112,0x00000002,SI_3112_Service_Install, Miniport_EventLog_Inst AddService=SiFilter,0,FilterService_Install AddService=SiRemFil,0,RemovableDevFilter_Install [SI_3112_XP.NTamd64.CoInstallers] Copyfiles=DllFiles AddReg = SI_3X12_CoInstall_AddReg [SI_3512_XP.NTamd64] Copyfiles=DriverFiles, DllFiles [SI_3512_XP.NTamd64.Services] AddService=SI3112,0x00000002,SI_3512_Service_Install, Miniport_EventLog_Inst AddService=SiFilter,0,FilterService_Install AddService=SiRemFil,0,RemovableDevFilter_Install [SI_3512_XP.NTamd64.CoInstallers] Copyfiles=DllFiles AddReg = SI_3X12_CoInstall_AddReg [SI_3X12_CoInstall_AddReg] HKR,,CoInstallers32,0x00010000,"SilSupp.cpl, CoInstHandler" [SI_3112_Service_Install] DisplayName=%SI3112.SvcDesc% ServiceType=1 StartType=0 ErrorControl=1 ServiceBinary=%12%\SI3112.sys LoadOrderGroup=Scsi miniport DelReg=ProblemDeviceList_DelReg AddReg=PnPSupport_AddReg AddReg=PortConfigure_AddReg AddReg=ProblemDeviceList_AddReg AddReg=SupportedSubSystemIds_AddReg [SI_3512_Service_Install] DisplayName=%SI3512.SvcDesc% ServiceType=1 StartType=0 ErrorControl=1 ServiceBinary=%12%\SI3112.sys LoadOrderGroup=Scsi miniport DelReg=ProblemDeviceList_DelReg AddReg=PnPSupport_AddReg AddReg=PortConfigure_AddReg AddReg=ProblemDeviceList_AddReg AddReg=ChanConfigOverrides_AddReg AddReg=SupportedSubSystemIds_AddReg [FilterService_Install] DisplayName=SATALink driver accelerator ServiceType=1 StartType=0 ErrorControl=0 ServiceBinary=%12%\SiWinAcc.sys LoadOrderGroup=Filter [RemovableDevFilter_Install] DisplayName=SATALink External Device Filter ServiceType=1 StartType=0 ErrorControl=1 ServiceBinary=%12%\SiRemFil.sys AddReg=RemovableDevFilter_AddReg ;;LoadOrderGroup="PnP Filter" ; Enable removable device filter to attach to disk and cd-rom class devices. [RemovableDevFilter_AddReg] HKLM, System\CurrentControlSet\Control\Class\{4d36e967-e325-11ce-bfc1-08002be10318}, UpperFilters, 0x00010008, SiRemFil HKLM, System\CurrentControlSet\Control\Class\{4d36e965-e325-11ce-bfc1-08002be10318}, UpperFilters, 0x00010008, SiRemFil ; Mark device as supporting Plug & Play on the PCI(5) bus. [PnPSupport_AddReg] HKR,Parameters\PnPInterface,5,0x00010001,1 [PortConfigure_AddReg] HKR,Parameters\Device,NumberOfRequests,0x00010001, 64 HKR,Parameters\Device,MaximumSGList,0x00010001, 33 HKR, Parameters\Device, CreateInitiatorLU, 0x00010001, 1 ; List of possible obsolete problem device list entries that should be ; removed prior to the addition of the replacement problem device list ; entries. [ProblemDeviceList_DelReg] HKR,ProblemDevices, %ObsProblemDev1Name% HKR,ProblemDevices, %ObsProblemDev2Name% ; List of devices with known configuration issues. [ProblemDeviceList_AddReg] HKR,ProblemDevices HKR,ProblemDevices, %ProblemDev1Name%, 0, %ProblemDev1Value% HKR,ProblemDevices, %ProblemDev2Name%, 0, %ProblemDev2Value% HKR,ProblemDevices, %ProblemDev3Name%, 0, %ProblemDev3Value% HKR,ProblemDevices, %ProblemDev4Name%, 0, %ProblemDev4Value% HKR,ProblemDevices, %ProblemDev5Name%, 0, %ProblemDev5Value% HKR,ProblemDevices, %ProblemDev6Name%, 0, %ProblemDev6Value% HKR,ProblemDevices, %ProblemDev7Name%, 0, %ProblemDev7Value% HKR,ProblemDevices, %ProblemDev8Name%, 0, %ProblemDev8Value% HKR,ProblemDevices, %ProblemDev9Name%, 0, %ProblemDev9Value% HKR,ProblemDevices, %ProblemDev10Name%, 0, %ProblemDev10Value% HKR,ProblemDevices, %ProblemDev11Name%, 0, %ProblemDev11Value% HKR,ProblemDevices, %ProblemDev12Name%, 0, %ProblemDev12Value% ; List of controller subsystem IDs to be supported by the SI3112.sys driver. [SupportedSubSystemIds_AddReg] HKR,SupportedSubsystemIDs, %PCI\VEN_1095&DEV_3112.DeviceDesc%, 0x00010001, 0x31121095 HKR,SupportedSubsystemIDs, %PCI\VEN_1095&DEV_3512.DeviceDesc%, 0x00010001, 0x35121095 HKR,SupportedSubsystemIDs, %SI3512_SUB_ID_DESC_IBM%, 0x00010001, 0x35121014 HKR,SupportedSubsystemIDs, %SI3512_SUB_ID_DESC_IBM2%, 0x00010001, 0x02B71014 HKR,SupportedSubsystemIDs, %SI3512_SUB_iD_DESC_MSI%, 0x00010001, 0x145A1462 HKR,SupportedSubsystemIDs, %SI3512_SUB_ID_DESC_LOGITECH%, 0x00010001, 0x001F6409 HKR,SupportedSubsystemIDs, %SI3512_SUB_ID_DESC_SYSTEM_TALKS%, 0x00010001, 0x35121A5F [ChanConfigOverrides_AddReg] HKR, ChannelConfigurations, %SI3512_SUB_ID_DESC_SYSTEM_TALKS%, 0x00010001, 0x00000011 ;************************************************************* ;The NT EventLog entries are the same for all SCSI miniports. [Miniport_EventLog_Inst] AddReg = Miniport_EventLog_AddReg [Miniport_EventLog_AddReg] HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll" HKR,,TypesSupported,0x00010001,7 [Strings] SI="Silicon Image" PCI\VEN_1095&DEV_3112.DeviceDesc="Silicon Image SiI 3112 SATALink Controller" SI3112.SvcDesc="SiI-3112 SATALink Controller" PCI\VEN_1095&DEV_3512.DeviceDesc="Silicon Image SiI 3512 SATALink Controller" SI3512.SvcDesc="SiI-3512 SATALink Controller" ; Registry value names to use for PCI subsystem ID values assigned by third parties ; using the 3x12 controller. SI3512_SUB_ID_DESC_IBM="Silicon Image SiI 3512 SATALink Controller (IBM 1)" SI3512_SUB_ID_DESC_IBM2="Silicon Image SiI 3512 SATALink Controller (IBM 2)" SI3512_SUB_iD_DESC_MSI="Silicon Image SiI 3512 SATALink Controller (MSI)" SI3512_SUB_ID_DESC_LOGITECH="%PCI\VEN_1095&DEV_3512.DeviceDesc% (LOGITECH)" SI3512_SUB_ID_DESC_SYSTEM_TALKS="Silicon Image SiI 3512 SATALink Controller (System Talks)" ObsProblemDev1Name="ST330013AS 108b " ObsProblemDev2Name="ST330013AS 1.20 " ProblemDev1Name="Maxtor 4D060H3 DAK05GK0" ProblemDev1Value="MaxMode = UDMA-5" ProblemDev2Name="ST320012AS" ProblemDev2Value="Mod15Write" ProblemDev3Name="ST330013AS" ProblemDev3Value="Mod15Write" ProblemDev4Name="ST340017AS" ProblemDev4Value="Mod15Write" ProblemDev5Name="ST360015AS" ProblemDev5Value="Mod15Write" ProblemDev6Name="ST380023AS" ProblemDev6Value="Mod15Write" ProblemDev7Name="ST3120023AS" ProblemDev7Value="Mod15Write" ProblemDev8Name="ST340014ASL" ProblemDev8Value="Mod15Write" ProblemDev9Name="ST360014ASL" ProblemDev9Value="Mod15Write" ProblemDev10Name="ST380011ASL" ProblemDev10Value="Mod15Write" ProblemDev11Name="ST3120022ASL" ProblemDev11Value="Mod15Write" ProblemDev12Name="ST3160021ASL" ProblemDev12Value="Mod15Write"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.