;
;SMC EZ Card 10/100 (SMC1211TX)
;
; OEMSETUP.INF - NDIS3/NDIS4 Miniport driver installation information file
; on Windows NT 3.51, NT 4.0
;
; Copyright (C) 1998, SMC Networks Corp. All Rights Reserved.
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
"Jazz-Internal Bus"
[Options]
SMC1211
[FileConstants]
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "SMC"
ProductMajorVersion = "1"
ProductMinorVersion = "00"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "SMC1211"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\SMC1211.sys"
NetRuleSoftwareType = "SMC1211Sys ndisDriver SMC1211Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """SMC1211Sys"" yes no container"
NetRuleSoftwareClass = {"SMC1211Driver basic"}
NetRuleSoftwareBindable = {"SMC1211Driver SMC1211Adapter non exclusive 100"}
ProductHardwareName = "SMC1211"
NetRuleHardwareType = "SMC1211 SMC1211Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"SMC1211Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
VersionKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion"
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set !G:DebugOutputControl = 1
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
Debug-Output "clt begin Install Option sectoin "
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
Debug-Output "clt begin to run "
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
Debug-Output "clt after begin: "
set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set CommonStatus = STATUS_REBOOT
set ActivateDetection = TRUE
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the SMC1211TX driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
set ActivateDetection = TRUE
endif
Debug-Output "clt: =================================================="
Debug-Output "clt: STF_CWDIR is: "$(!STF_CWDIR)
Debug-Output "clt: STF_LANGUAGE is: "$(!STF_LANGUAGE)
Debug-Output "clt: Option is: "$(Option)
Debug-Output "clt: !STF_NCDETECT is: "$(!STF_NCDETECT)
Debug-Output "clt: !STF_NCOPTION is: "$(!STF_NCOPTION)
Debug-Output "clt: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
Debug-Output "clt: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
Debug-Output "clt: =================================================="
Set DetectedCard = FALSE
Set EtherID = ""
Ifstr(i) $(ActivateDetection) != TRUE
Goto skipdetection
Endif
skipdetection =+
Debug-Output "clt after skipdetection "
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
;; set Source_Directory = "WINNT"
OpenRegKey $(!REG_H_LOCAL) "" $(VersionKeyName) $(MAXIMUM_ALLOWED) KeyVersion
GetRegValue $(KeyVersion),"CurrentVersion",VersionStruct
CloseRegKey $(KeyVersion)
Set NTVersion = *($(VersionStruct),4)
Ifstr(i) $(NTVersion) == "3.51"
set Source_Directory = "WNT351"
else
set Source_Directory = "WINNT"
endif
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Set SrcDir = $($R1)
Endif
install "Install-help"
Debug-Output "clt after installadapter "
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
Ifstr(i) $(DetectedCard) != TRUE
Goto adaptersetup
Endif
StartWait
Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
EndWait
Ifstr(i) $($R0) != STATUS_SUCCESSFUL
Goto adaptersetup
Endif
Set DetectedParams = $($R1)
Debug-Output "clt: Calling Param_SetDefaults to merge detected params"
Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
goto adapteroptions
configureadapter = +
Debug-Output "clt after configureadapter: "
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "Speed"
set speed = $(ValueData)
else-ifstr(i) $(ValueName) == "SlotNumber"
set DeviceNum = $(ValueData)
else-ifstr(i) $(ValueName) == "EtherID"
set EtherID = $(ValueData)
else-ifstr(i) $(ValueName) == "BusType"
set BusInterfaceType = $(ValueData)
else-ifstr(i) $(ValueName) == "BusNumber"
set BusNum = $(ValueData)
else-ifstr(i) $(ValueName) == "FunctionNumber"
set FunctionNum = $(ValueData)
endif
EndForListDo
adaptersetup =+
Debug-Output "clt after adaptersetup: "
Shell $(ParamInf) Param_ParameterConfidence
Ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "OEMNADE2.INF: parameter confidence too low to bypass configuration"
Goto adapteroptions
Endif
Ifstr(i) $(DetectedCard) == TRUE
Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
Goto adapterverify
Endif
Endif
goto adapteroptions
adapteroptions = +
Debug-Output "clt after adapteroptions: "
set from = adapteroptions
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
ifstr(i) $(!AutoNetInterfaceType) != ""
set BusInterfaceType = $(!AutoNetInterfaceType)
else
set BusInterfaceType = 1
endif
ifstr(i) $(!AutoNetBusNumber) != ""
set BusNumber = $(!AutoNetBusNumber)
else
set BusNumber = 0
endif
goto adapterverify
endif
set EtherID = ""
set BusInterfaceType = 5 ;;;; pci 0x5
set BusNumber = 0
adapterverify =+
Debug-Output "clt after adapterverify: "
Ifstr(i) $(DetectedCard) != TRUE
Debug-Output "clt detectedcard != TRUE: "
Goto skipoptions
Endif
Debug-Output "clt: Calling Param_VerifyCard"
Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
Ifstr(i) $($R0) == STATUS_SUCCESSFUL
Debug-Output "clt: Param_VerifyCard succeeded"
Goto skipoptions
Endif
Set from = adapteroptions
Set to = skipoptions
Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto Warning
skipoptions =+
Debug-Output "clt after skipoptions: "
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
;;set VenID = 4332 ;;Realtek Vendor ID = 10ECh
;;set DevID = 33081 ;;Realtek Device ID = 8139h
set VenID = 4371 ;;SMC1211 Vendor ID = 1113h (hex) --> 4371 (dec)
set DevID = 4625 ;;SMC1211 Device ID = 1211h (hex) --> 4625 (dec)
Debug-Output "clt: Before getpciinf!!"
Shell $(UtilityInf), GetPCIInformation, $(VenID) $(DevID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "clt: getpciinformation shell code error!!"
goto ShellCodeError
endif
ifstr(i) $($R0) == {}
Debug-Output "clt: Cannot find the NET CARD after getpciinf!!"
set Error = " Cannot find the Net Card !!"
set CommonStatus = USER_CANCEL
set from = end
goto nonfatal
endif
set AdapterList = $($R0)
ifint $(OldVersionExisted) == $(FALSE)
Debug-Output "clt: enter if( oldverexisted == false) "
ifstr(i) $(!NTN_InstallMode) == "install"
Debug-Output "clt: enter if( NTN_InstallMode == install) "
Ifstr(i) $(DoCopy) == "YES"
Debug-Output "clt: enter if( Docopy == YES) "
;Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
Debug-Output "clt: begin forlistdo "
ForListDo $(AdapterList)
set BusNum = *($($),1)
set DeviceNum = *($($),2)
set FunctionNum = *($($),3)
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
$(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
Debug-Output "clt: after isnetcardalreadyinstalled"
ifstr(i) $($R1) != "YES"
Debug-Output "clt: enter if (R1 != yes)"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
set SpeedValue1 = "AUTO"
set speed = "AUTO"
set cltlist = {"AUTO", "10" ,"100"}
read-syms SpeedDlg$(!STF_LANGUAGE)
Debug-Output "clt before ui start inputDlg: "
SetHelpFile $(!STF_WINDOWSSYSPATH)"\"smc.hlp 10 20 10
ui start "InputDlg"
Debug-Output "clt after ui start inputDlg: "
ifstr(i) $(DLGEVENT) == "CONTINUE"
set speed = $(ListItemsOut)
Debug-Output "clt Continue:"$(speed)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "EXIT"
Debug-Output "select speed cancel."
ui pop 1
goto end
else
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
set NewValueList = {{EtherID,$(NoTitle),$(!REG_VT_SZ),$(EtherID)},+
{Speed,$(NoTitle),$(!REG_VT_SZ),$(speed)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
{FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
endif
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
Debug-Output "clt: leave if (R1 != yes)"
endif
EndForListDo
Debug-Output "clt:Endforlistdo "
EndWait
goto successful
writeparameters = +
Debug-Output "clt: begin writeparameters !"
set SpeedValue1 = "AUTO"
set speed = "AUTO"
set cltlist = {"AUTO", "10" ,"100"}
read-syms SpeedDlg$(!STF_LANGUAGE)
SetHelpFile $(!STF_WINDOWSSYSPATH)"\"smc.hlp 10 20 10
Debug-Output "clt before ui start inputDlg: "
ui start "InputDlg"
Debug-Output "clt after ui start inputDlg: "
ifstr(i) $(DLGEVENT) == "CONTINUE"
set speed = $(ListItemsOut)
Debug-Output "clt Continue:"$(speed)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "EXIT"
Debug-Output "select speed cancel."
ui pop 1
goto end
else
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
set NewValueList = {{EtherID,$(NoTitle),$(!REG_VT_SZ),$(EtherID)},+
{Speed,$(NoTitle),$(!REG_VT_SZ),$(speed)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
{FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
endif
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
Debug-Output "clt:end write parameter !! "
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
UpgradeSoftware = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "clt:ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[Install-help]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-help $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
ifstr(i) $(DoConfig) == "YES"
endif
Exit
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
ifstr(i) $(DoConfig) == "YES"
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
Ifstr(i) $(NTVersion) == "3.51"
set Source_Directory = "WNT351"
else
set Source_Directory = "WINNT"
endif
;; set Source_Directory = "WINNT"
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-help $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-$(Option) $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "SMC EZ Card 10/100 (SMC1211TX) Driver Diskette"
[Signature]
FileType = MICROSOFT_FILE
[GetSignature]
read-syms Signature
return $(FileType)
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1,oemsetup.inf, SIZE=30000, RENAME=$(!UG_Filename)
[Files-SMC1211]
1,SMC1211.SYS , SIZE=30000
[Files-help]
1,smc.hlp, SIZE=8000
[LanguagesSupported]
ENG
[OptionsTextENG]
SMC1211 = "SMC EZ Card 10/100 (SMC1211TX)"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = "SMC EZ Card 10/100 (SMC1211TX) Setup"
ProductSoftwareDescription = "SMC EZ Card 10/100 (SMC1211TX) Driver"
ProductHardwareSMC1211Description = "SMC EZ Card 10/100 (SMC1211TX) Adapter"
ProductSoftwareTitle = "SMC EZ Card 10/100 (SMC1211TX) Driver"
ProductHardwareSMC1211Title = "SMC EZ Card 10/100 (SMC1211TX) Adapter"
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = "Shell Code Error."
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
Caption = "Input Ethernet ID"
DlgText = "Please input adapter's Ethernet ID: "$(!LF)+
"For example:"$(!LF)+
" Ethernet ID: 00 01 02 A3 B4 C5"$(!LF)$(!LF)+
"(This option is only required when you have more than "+
"one SMC EZ Card 10/100 (SMC1211TX) on this computer. "+
"Select SKIP if only one adapter is installed on "+
"this computer.)"
Edit1Label = "&Ethernet ID:"
Continue = "&OK"
Exit = "&Skip"
Help = "&Help"
DlgType = "Edit"
DlgTemplate = "QUERY_COMPUTER_NAME"
EditTextLim = 17
EditTextIn = $(EtherID)
EditFocus = "ALL"
[SpeedDlgENG]
Caption = "Select Line Speed"
DlgText = "This netcard support (1) AutoDetect (2) 10 Mbps (3) 100 Mbps."+
" Please select one:"
Continue = "OK"
Cancel = "Cancel"
Help = "&Help"
DlgType = List
DlgTemplate = "OEMSINGLESEL"
HelpContext = 10
ListItemsIn = $(cltlist)
ListItemsOut = $(SpeedValue1)
; ListItemsIn = $(OemOptionTextList)
; ListItemsOut = *($(OemOptionTextList),1)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.