ds/09/12/99/2.53 - / Dynalink ISDN cards / 95 /98 /NT
*news*
Releasenotes: 2.53
These drivers are suitable for:
IS64PH (2 Siemens chipset ISA)
IS64PH (1 Siemens chipset ISA)
IS64PH-AN (analogue port ISA)
IS64PPH (Winbond chipset PCI)
IS128AH (Winbond chipset PCI with analogue port)
Other new hardware releases will follow
*******************************************************************************
* 2.53 - DRIVER RELEASE DYNALINK IS64PH/PPH/PH-AN/IS128AH FOR WINDOWS *
* *
* Please give commands suggestions to our support !!! *
* E-mail: isdn@dynalink.com *
* *
* If you have any tools which are suitable for our ISDN adapters, Please *
* Send them to us. If it is giving extra features to our card, than we *
* will release it through our webpages, Please send it to isdn@dynalink.com *
* Up-2-date:31-11-99, Dennis Slagers *
* Direct Support Dynalink: 0900-2024006 (fl 1.-- p/m) *
*******************************************************************************
** ONLY WITH YOUR COMMENTS WE CAN IMPROVE OUR DRIVERS. SO PLEASE SEND YOUR **
SUGGESTIONS AND TIPS AND QUESTIONS TO ISDN@DYNALINK.COM
-----------------------------------------
Version 2.53 (Win95/Win98/WinNT 09-12-99) updated version
Editor: Dennis Slagers
1. Improved drivers for UUD Win95/98/NT
2. Improved stability of driver for Win95/98/NT
3. A TIP for those who read this: For this version you are allowed to copy
the file IIN100.SYS or IIN100.VXD to your system and overwrite the old
file if the driver is 2.49 or higher. Reboot your system and your ISDN
drivers have been updated.
Version 2.53 (released 31-11-99)
Editor: Dennis Slagers
1. Minor updates and improvements
2. Add SWEEP.EXE into distribution:
SWEEP.EXE is replacement for IINCLEAN.EXE. SWEEP.EXE is Windows utility
for cleaning the ISDN card drivers and registry settings under Win95/Win98
Be noticed: it is possible that 1 driver is left behind: please delete
this manually: driver in \Windows\Inf\Other which is related to the
ISDN card can be left behind and is not deleted by SWEEP.EXE, please delete
this yourself when de-installing the ISDN card
3. Upon request of many customers: LOG32.EXE will show the icon into your
systemtray again. (ISDN line activity and logfile functionality)
4. Change of INF structure. No typenumbers are displayed anymore. Due to
change of commercial typenumber(s) in future.
Version 2.52 (not released)
Editor: Dennis Slagers
1. Fix the MRRU problem in PPP protocol
2. Solve the install problem for the motherboard which is using
INTEL 810E chipset (cannot find BUS number)
Version 2.51 (not released)
1. Fix a bug for connection fail on V.120 / X.75
Version 2.50 (not released)
1. Add AT commands for ML-PPP BOD mode
ATS55=50 data flow for B-channel connected, unit is percentage
ATS56=10 duration for B-channel connected, unit is seconds
ATS57=20 data flow for B-channel disconnected, unit is percentage
ATS58=30 duration for B-channel disconnected, unit is seconds
2. Fix the IO/IRQ problem in GateByte BX dual mainboard
Version 2.49 (released 04-08-1999)
- Some minor improvements made no further details available
Version 2.48 (not released)
Version 2.47 (released 02-07-1999)
Release for Windows 95, Windows 98, Windows NT
by Dennis Slagers
1. Resume the item 1 in version 2.46 (95,98,NT4.0)
Version 2.46 (never released)
By Dennis Slagers
1. Modify layer2 manager for response the first TEI-ID-CHECK request only
(95/98/NT4.0)
2. fix the linetest.exe (through capi2016) problem (95/98)
3. fix the problem of using the same ISDN COM port for two Dialup networking
application (95,98)
Version 2.45 29/03/99
By Dennis Slagers
1. Add CAPI EarlyB3Connect feature (95,98,NT4.0)
2. Change the Idle pattern 0xAA for A-law and 0xFF for u-Law (Win95,98,NT4.0)
3. Disconnect slave link of ML-PPP when Data-Only card receive incoming voice
call.
Version 2.44 (not released)
By Dennis Slagers
1. Fix the problem of IRQ conflict with SB card (Win98)
2. Fix the problem of confirmation tone cannot be heard (Win95,98,NT4.0)
Version 2.43 (not released)
By Dennis Slagers
1. Provide new parameters for ATD command such as ATDYaNb#
Where Y is 'Type of number' N is 'Numbering plan identification' and
# is the 'Telephone number'
a = 0 unknown (default)
1 international number
2 national number
3 network specific number
4 subscriber number
6 abbreviated number
b = 0 unknown (default)
1 ISDN/Telephony numbering plan
3 data number plan
4 telex numbering plan
8 national standard numbering plan
9 private numbering plan
2. Fix sleep mode active problem when data transmitting (Win98)
3. Fix Vcomm application can not establish connection when sleep mode active
Version 2.42 (released 08-02-99)
By Dennis Slagers
1. Fix the sleep modem problem (98)
2. Fix the PCI I/O invalid problem (NT)
3. Fix the PCI IRQ share problem with some SCSI PCI cards (NT 4.0)
News for 2.41 (not released)
By Dennis Slagers
* Fix the checking method of PAP indentification of MLPPP (95,98)
* fix the CAPI interface for a specific program (NT)
* fix ISA wakeup CSN problem when sound card exists (NT)
News for 2.40 (not released)
By Dennis Slagers
* Fix High Layer Compatibility I.E. Sending problem (95,98,NT)
* Fix POTS always ring problem (when incoming call and POTS no answer if
remote user disconnect this call then POTS can not stop ring). (95,98,NT)
* Modify cause value in RLEASE COMPLETE packet when MSN or SAD is not matched
(95,98,NT)
News for 2.39
By Dennis Slagers
* Fixed IRQ self-test failure problem for ISDN PCI (Cologne and Winbond
chipset) (95,98,NT)
* Increase the buffer number to handle more and better incoming packets
in 128K mode for better reliability (95,98)
* Fixed a bug when you want to access the virtual comport and you will
receive an error in the first time after the installation (98)
News for 2.37
By Dennis Slagers
* Provide the Point to Point ISDN connection, this can be configured in the
property of the ISDN card. Also with the TEI value (95,98)
* Provide a way to configure the X.25 TEI value. This value can be configured
in the property of the ISDN card (95,95)
* Fixed a bug in our MLPPP mode when the TA is communicating with a DIGI
PCIMAC 4ST board in TCP/IP compression ON condition (95,98)
News for 2.36 [never public/beta released. Only internally]
* Fixed a bug for Pots interface (95,98,NT)
* After several request: fixed the ISDN port name. (ndis / iinwan) (95,98)
* Add the CHAP function into ML-PPP (95,98)
News for 2.35 (Released as 2.34 rev 2)
By Dennis Slagers
* Improvement of the CAPI state diagram protection. (solve the unconditional
case). (95,98,NT)
* Improvement of the COMport state protection (solve the unconditional case)
(95,98)
* Fixed a bug of AT&ZO command when the parameters are MSN and subaddress
(95,98)
* fixed a bug of AT&ZI command when parameters are MSN with subaddress
(95,98)
* new LOG32.exe program generating an icon in the systemtray, it shows
the ISDN D, B1 and B2 active status (95,98,NT)
* fixed a bug when sharing same IRQ with USB (valid for win95,98,NT)
* fixed a bug (VxD) when install the RVSCOM-lite in Win98 (Vcomm)
* fixed a bug when open two comports and change the protocol for each
port (98 vxd)
News for 2.34
By Dennis Slagers
* Fixed a bug occurred in 2.32, 2.33 in NT (receiving incoming bit
transparent data strings).
* Improve the buffer managment for more reliability in MLPPP mode
* Still testing stability for NT. (Please send us input).
* Fixed IRQ sharing problem with USB devices (motherboards) for IS64PPH
News for 2.33 17-09-98
By Dennis Slagers
* Some minor improvements. Customers have reported problems with linetest
These drivers are solving this. This is an officieal release.
* Fixed a bug. ISDN card cannot be found in NT 4.0 with PII-300MHz or higher
speed CPU
* For Windows 98 you can try the WDM driver 3.0 Which is also supporting
multiple Dynalink ISDN cards.
* New manual is in preparation
News for 2.32
Edited by Dennis Slagers
* Fixed: a bug in MLPPP class 0 mode (win95/98)
* Fixed: a bug when ringing the IS64PH-AN
* Fixed: a bug when set the ATB20 (V.120) and then AT&E0, than the linespeed
would be still 56K (win31)
* Fixed: a bug of returned string when use the Universal-1 with ATB41 in the
extra settings field and Universal-2 with ATB4 to connect The Internet. The
display string should be 128000 not 256000 (Win95/98)
* Increased the number of buffers for LAPD in V.120 and X.75 to improve the
transmission rate in PPP mode over V.120 or X.75 (Win95/98)
* The AT command set, ATB6 is used for PPP over V.120 and ATB7 is used for
PPP over X.75 series (win95/98)
* Improvement of the ML-PPP+BOD function (Win95/98) --> Please test this feature!
* Let the u_Law characters be seen for Windows in different languages (win95/98/nt)
* Fix the inconsistent data type in the program and registry for standbytime
* HINT: for de-installing the card and to install the drivers again, please use
the IMPROVED: IINCLEAN.EXE!
News for 2.30
Edited By Dennis Slagers
Version 2.30 is a major new release with a lot of new functionality
which we will describe.
For more the history see below the notes for version 2.30.
For Windows NT systems, the Dynalink drivers supports multi-processor platform,
this is not longer beta anymore. It can benefit the powerful users running
Dynalink's IS64PH / IS64PH-An internal cards on the multi-processors NT
system. Alpha systems do not run.
There are several new and innovative features provided in for Windows 3.1,
Windows 95 and 98 systems. More easy installation, and control your time and
costs.
1. For Win95/Win98, the Multilink PPP (128K) is being accessed through our
virtual modem (Dynalink Internet MLPPP modem). The customer does not need
to install the MSISDN 1.1 (Microsoft ISDN Accelerator Pack 1.1) or DUN 1.2
(Dialup Networking version 1.2) for adding the secondary device to achieve
the 128K Internet Access.
2. In the Win95/98 systems, the Multilink PPP+BOD (Bandwith on Demand) (128K)
does also not need MSISDN 1.1. or DUN 1.2. In this case it has even the
Bandwith-on-Demand function. This means that the bandwith (64K or 128K)
will be depend on the data traffic and incoming/outgoing voice call. In the
beginning stage, it will establish 1 B Data Channel (64K) and will only
add a second B Data Channel when the data traffic is going over the
specified value (refer to ATS53=x). (only when there is a second channel
available).
Once it is in ML-PPP mode (128K) it can drop 1 B channel based on three
conditions.
a. The average data traffic is lower thatn the value (ATS53=x) in
a specific time period (ATS54=x).
b. The customer wants to make a outgoing voice call such as picking
up the handset (IS64PH-AN).
c. There is an incoming voice call, the analog telephone device will
have a ring signal.
With this BOD function, you will have more flexibility to handle voice and
data simultaneously.
Important: this will only work when you have an extra service activated at
your local PTT. For Dutch customers: they call it:
'Dienst Wisselgesprek/Bereikbaarheid'. You have to ask for it for 'ALL MSN's'.
3. In this driver we provide als PPP, ML-PPP and BOD over X.75 Protocol
functions. If your ISP or RAS server provides these kind of function,
please select the virtual modem from the modem INF file which we provide.
Then it is more easy to configure and make a connection with your ISP
or RAS server.
4. Inactivity Setting
In this driver we provide the ATS30=n command. This tells the driver to
disconnect the active connection automatically if there is no data
traffic for x * 10 seconds
How to configure the ISDN driver for the above mentioned functions?
1. First you have to install the modem driver to the COM5 or COM6 which
are available. In the total list you see a number of modems which you
can select. Select the one which meets your ISP or RAS server requirements
and select the ISDN comport to use with this modem.
|-----------------------------------------------------------------------------|
| AT COMMAND added for drivers version 2.30 |
|-----------------------------------------------------------------------------|
| ATB42 | Async to Sync PPP conversion in ML-PPP mode |
|-----------------------------------------------------------------------------|
| ATB43 | Async to Sync PPP conversion in ML-PPP+BOD mode |
|-----------------------------------------------------------------------------|
| ATB6 | Async to Sync PPP over X.75 Trans. |
|-----------------------------------------------------------------------------|
| ATB61 | Async to Sync PPP over X.75 (you need to setup a secondairy |
| | device in Dialup Networking) |
|-----------------------------------------------------------------------------|
| ATB63 | Async to Sync PPP conversion in ML-PPP over X.75 |
|-----------------------------------------------------------------------------|
| ATS30 | Disconnect the connection automatically if there is no data |
| | transmission in n*10 secons (n=0 to 255, default ATS30=0, it |
| | will not disconnect the connection. |
|-----------------------------------------------------------------------------|
| ATS53 | Average Data Flow from 1000 to 7000 bytes (default=4, |
| | 4000 bytes) Activate the second channel if the avarage data |
| | flow is over 4000 bytes in 10 seconds. This register is only |
| | available in ML-PPP BOD mode (ATB43). |
|-------|---------------------------------------------------------------------|
| ATS54 | Time period from 5 to 20 minutes (default 5). Disconnect the |
| | second channel if the average data flow is below N bytes (set |
| | by ATS53) in 5 minutes. This register is only available in |
| | ML-PPP BOD mode, ATB43 |
|-----------------------------------------------------------------------------|
Also new:
- New 'virtual' modem INF driver included
Dynalink Internet Async To Syn PPP 64K, for normal ISDN access, 1 B channel (*)
Dynalink Internet ML-PPP over X.75, 128K Adapter. (Your ISP must support it)
Dynalink Internet MLPPP, 128K Adapter, (Normal PPP connection 2 B channel) (*)
Dynalink Internet MLPPP+BOD over X.75, 128K adapter
Dynalink Internet MLPPP+BOD, 128K adaper (*)
Dynalink Internet PPP over X.75, 64K adapter
Dynalink X.75 Transparent, 64K Adapter (BBS Access)
Bugfixes / News for version 2.29
By Dennis Slagers
1. Never released for Win95.
2. Improvement for Multiprocessor platforms NT
Bugfixes / News for version 2.28
By Dennis Slagers
1. Fixed bug when communicating with a USR Courier I when in HDLC
mode [all platforms], thanks to Dutch testers
2. Fixed bug in Windows NT 4.0 Server which could not provide multiline
access for remote clientes
3. fixed bug in Ndiswan Interface when be called [win95]
4. Fixed bug in MSN checking (Windows NT)
5. Fixed a bug for accepting an incoming call with X.75 Trans. [all platforms]
6. changed: do not reply any message when receiving FACILITY message
from 'The Switch (95/NT)
7. Fixed problem in configuration utility which may not save the settings
into the registry tree (win95
8. Provide new chipset control program (95/NT)
Bugfixes /News for version 2.27-2.27b1
By Dennis Salgers
1. Provide the KEYPAD function for IS64PH-AN (Voice Mail / DUTCH!!)
2. Remove V.120 sync modem [all platforms]
3. Provide Kernel modem Capi 2.0 interface for Win95
4. Correction for return code for Comport within win95
2.27b1
1. Fixed bug in IINCFG.EXE for Win 3.1
2. LOG.EXE fixed for Win 3.1 did not display ISDN channels correct
3. Fixed stability problem 2186/21525 (D channel activation)
4. Improve chipset control [all platforms]
5. PCI support for Windows NT added
Bugfixes /News for version 2.26b1
By Dennis Slagers
- Add a ATS37=128 to send the Lower Layer Compatibility, default S37=0
(not sending the LCC) [win95]
- Not sending the LLC in driver for 3.1,95 and NT
- Fixed bug in V.120 when receiving a different protocol in B channel
[all platforms]
- Provide new chipset device driver support (PSB2115)
Bugfixes / News for version 2.26
- *.inf files restyled
- Solved Com5 & Com6 problem when startup Windows 95. This problem can
occure when RVSCOM is installed.
- Solve reboot, freeze problem when you disconnect the active connection
- LOG.EXE renamed to LOG32.EXE
Bugfixes / News for version 2.25
By Dennis Slagers
FOR UPDATE DRIVER WIN95: PLEASE REMOVE VIRTUAL MODEMS CONNECTED TO
COM5 AND/OR COM6
FOR NEW DRIVER NT: PLEASE REMOVE IS64PH IN NETWORK ENVIRONMENT
Many little bugs fixed. Work on stability. No additional features released
Improvement of usage virtual comports. Vcomm driver
Bugfixes / News for version 2.22
By Dennis Slagers
[Windows 95]
- No DN1 & DN2 entries in the Device manager (ISDN Card, IS64PH ISDN adaptor
Properties): these settings are replaced by AT commansd, and Ndiswan miniport
(see also our FAQ (dutch) question 17))
AT&ZOm*n* (callerparty functioning; outgoing)
where m* is number
where n* is subaddress
AT&ZIm*n* (Accepting calls on MSN )
- Callerparty / MSN accepting calls supported from Ndis Wan Miniport
(see also our FAQ (dutch) question 17))
start-settings-controlpanel-system-network adapters, choose
IS64PH IINWAN95 (double click), settings. Here you can specify the
caller party numbers and MSN numbers for your IS64PH card
With callerparty, you can specifiy your PTT phonebill on different
MSN numbering.
- IINCLEAN.EXE provided
This program will delete the IS64PH driver files for de-installation
Note: you must delete also the ISDN card in your device manager
- Some other small fixes
[Windows NT]
- Callerparty / MSN accepting calls support from Ndis Wan Minipoort
System-network-adapters-properties, choose ISDN card, Clik ok on ISA
bus configuration, select in next window NDISWAN setting. Here you can
configure the callerparty numbers and MSN numbers for your IS64PH card
-------------------------------------------------------------------------------
Bugfixes / News for Beta 7 (2.21-B)
By Dennis Slagers 09-06-97
- release: Windows 95 full version / Update version
- More stability for drivers on Virtual comports / Ndiswan Miniport setting
- New Modemdriver. More resultcodes are available now
Please notice: you cannot see in the drivers that this
the B version of 2.21 !!!
Before updating new drivers:
DELETE YOUR EXISTING MODEMS CONNECTED TO THE VIRTUAL COM5 OR COM6 !
DELETE YOUR NDISWAN MINIPORT CONFIGURATION IN YOUR NETWORK PROPERTIES !
For updating your existing drivers with this version: use upgrade.exe
For installing the drivers for the first time: look in your manual and FAQ
Dynalink BBS is also available on ISDN X.75
Our BBS can be reached at X.75 on: +31-33-2580511 to get your latest drivers
Analogue (Modem V34+ / 33600 we can be reached at +31-33-2536268
Dynalink has also his own Internetdomain in The Netherlands:
http://www.dynalink.nl
For support about Dynalink, please contact: dynalink@2L.net
For information about 2L International, please contact: info@2L.net
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.