1. Usbide100.zip Driver
  2. install.ini File Contents

install.ini Driver File Contents (Usbide100.zip)

[MAIN]
  SELECT_REQUEST = "Select your Shining Technology hardware device from the above list, and click on "Next >" to continue."
  PAGE_LOGO_BITMAP = "backdropPortrait.bmp"
  BACKDROP_BITMAP = "shininglogo.bmp"
  BACKDROP_TITLE = "Shining Technology AutoInstaller"
  README_LABEL = "View Products Readme"
  README_COMMAND = "notepad.exe products.txt"
  WEBLINK_FILENAME = "webpage.htm"
  WIZARD_TITLE = "Shining Technology AutoInstaller"
  WIZARD_ERROR_TITLE = "Shining Technology AutoInstaller Error"
  DEVICE.0 = USBIDE100

[CITIROM]
  README_LABEL = "Readme"
  README_COMMAND = "notepad.exe Citirom\\Citirom.txt"
  WEBLINK_LABEL = "PC Cards Web Page"
  TYPE = GENERICPNP
  NAME = "PCMCIA/Cardbus - IDE Adapter"
  DESCRIPTION = "The CitiROM/CitiDISK Family PCMCIA/CardBus - IDE Adapter allows for plug&play support for IDE devices through a PCMCIA or CardBus interface slot."
  BITMAP = "Citirom.bmp"
  ACTION_TITLE = "Shining Technology PCMCIA/Cardbus - IDE Adapter AutoInstaller"
  INST_REQUEST = "PCMCIA/Cardbus - IDE Drivers"
  UNINST_REQUEST = "PCMCIA/Cardbus - IDE Drivers"
  INST_TITLE = "Shining Technology PCMCIA/Cardbus - IDE Installation"
  INST_WELCOME = "This utility will install drivers for your PCMCIA/CardBus - IDE adapter." 
  INST_COMPLETE = "The installation is complete.  Set the device's switch to either PCMCIA or Cardbus mode, and insert it into any compatible hardware slot to begin use.  No reboot is required."
  UNINST_TITLE = "Shining Technology PCMCIA/Cardbus - IDE Adapter Uninstallation"
  UNINST_WELCOME = "This utility will uninstall and remove drivers for your PCMCIA/CardBus - IDE adapter."

[CITIROM.WIN9X]
  PROVIDER = "Shining Technology"
  INF_FILENAME.0 = "PCMIDE95.INF"
  INF_FILEDIR.0 = "Citirom\\Window9x"
  INF_DEVCLASS.0 = "hdc"

  FILENAME.0 = "STIDE95.MPD"
  FILEDIR.0 = "Citirom\\Window9x"
  FILETARGET.0 = "IOS"
  FILENAME.1 = "SHINING.VXD"
  FILEDIR.1 = "Citirom\\Window9x"
  FILETARGET.1 = "IOS"

  DISKVXD_FILEDIR = "Citirom\\Window9x"

  DEL_DESC.0 = "Shining CardBus IDE Controller"
  DEL_DEVCLASS.0 = "hdc"
  DEL_DESC.1 = "Shining PCMCIA IDE Controller"
  DEL_DEVCLASS.1 = "hdc"

[CITIROM.NT]

  SERVICE_NAME.0 = "statpnt"
  SERVICE_DESC.0 = "Shining PCMCIA/ATAPI Adapter"
  SERVICE_FILE.0 = "statpnt.sys"
  SERVICE_MSGFILE.0 = "%SystemRoot%\\System32\\IoLogMsg.dll"
  SERVICE_MSGTYPE.0 = 7
  SERVICE_LOADGROUP.0 = "SCSI Miniport" 

  SERVICE_NAME.1 = "stcbint"
  SERVICE_DESC.1 = "Shining CARDBUS/ATAPI Adapter"
  SERVICE_FILE.1 = "stcbint.sys"
  SERVICE_MSGFILE.1 = "%SystemRoot%\\System32\\IoLogMsg.dll"
  SERVICE_MSGTYPE.1 = 7
  SERVICE_LOADGROUP.1 = "SCSI Miniport" 

  DUMMYSERVICE = "statpnt1"

  FILENAME.0 = "statpnt.sys"
  FILEDIR.0 = "Citirom\\NT"
  FILETARGET.0 = SVC

  FILENAME.1 = "stcbint.sys"
  FILEDIR.1 = "Citirom\\NT"
  FILETARGET.1 = SVC

  PCMCIA_MANUFACTURE.0 = "Shining"
  PCMCIA_PRODUCT.0 = "PMIDE-M17"
  PCMCIA_DEVICETYPE.0 = "SCSI"
  PCMCIA_DRIVER.0 = "statpnt"
  PCMCIA_PCI.0 = NONE

  PCMCIA_MANUFACTURE.1 = "Shining"
  PCMCIA_PRODUCT.1 = "PMIDE-ASC"
  PCMCIA_DEVICETYPE.1 = "SCSI"
  PCMCIA_DRIVER.1 = "statpnt"
  PCMCIA_PCI.1 = NONE

  PCMCIA_PCI.2 = "14E6_1_0_0"
  PCMCIA_MANUFACTURE.2 = "Shining"
  PCMCIA_PRODUCT.2 = "CBSIDE-V3"
  PCMCIA_DEVICETYPE.2 = "SCSI"
  PCMCIA_DRIVER.2 = "stcbint"

;  PCMICA_INTMASK = 23041

[CITIROM.WIN2000]
  PROVIDER = "Shining Technology"
  INF_FILENAME.0 = "STIDE2K.INF"
  INF_FILEDIR.0 = "Citirom\\Win2000"
  INF_DEVCLASS.0 = "hdc"

  FILENAME.0 = "STIDE2K.SYS"
  FILEDIR.0 = "Citirom\\Win2000"

  DEL_DESC.0 = "Shining CardBus IDE Controller Win2000"
  DEL_DEVCLASS.0 = "hdc"
  DEL_DESC.1 = "Shining PCMCIA IDE Controller Win2000"
  DEL_DEVCLASS.1 = "hdc"

  SERVICE_NAME.0 = "stide2k"

[SCARDSI]
  README_LABEL = "View SCardSI Readme"
  README_COMMAND = "notepad.exe SCardSI\\SCardSI.txt"
  WEBLINK_LABEL = "Visit SCardSI Web Page"
  TYPE = SCARDSI
  NAME = "SCardSI PCMCIA/Cardbus - SCSI Adapter"
  DESCRIPTION = "The SCardSI PCMCIA/CardBus - SCSI Adapter allows for plug&play support for up to 7 SCSI devices through a PCMCIA or CardBus interface slot."
  BITMAP = "Scardsi.bmp"
  ACTION_TITLE = "Shining Technology SCardSI AutoInstaller"
  INST_REQUEST = "Install SCardSI Drivers"
  UNINST_REQUEST = "Uninstall SCardSI Drivers"
  INST_TITLE = "Shining Technology SCardSI Installation"
  INST_WELCOME = "This utility will install drivers for your SCardSI PCMCIA - SCSI adaptor." 
  INST_COMPLETE = "The installation is complete.  Insert the device into any PCMCIA slot to begin use.  No reboot is required."
  UNINST_TITLE = "Shining Technology SCardSI Uninstallation"
  UNINST_WELCOME = "This utility will uninstall and remove drivers for your SCardSI PCMCIA - SCSI adaptor."

[SCARDSI.WIN9X]
  PROVIDER = "Shining Technology"
  INF_FILENAME = "PCMS8095.INF"
  INF_FILEDIR = "SCardSI\\Win95"

  FILENAME.0 = "pcms8095.mpd"
  FILEDIR.0 = "SCardSI\\Win95"

  DELDESC.0 = "Shining PCMCIA/SCSI-ASC Controller"
  DELDESC.1 = "Shining PCMCIA/SCSI-M17 Controller"

  DISKVXD_FILEDIR = "SCardSI\\Win95"

[SCARDSI.NT]
  SERVICE_NAME.0 = "scardsi"
  SERVICE_DESC.0 = "Shining PCMCIA/SCSI Adapter"
  SERVICE_FILE.0 = "pcms80nt.sys"
  SERVICE_MSGFILE.0 = "%SystemRoot%\\System32\\IoLogMsg.dll"
  SERVICE_MSGTYPE.0 = 7

  FILENAME.0 = "pcms80nt.sys"
  FILEDIR.0 = "SCardSI\\NT"
  
  PCMCIA_HARDWARE.0 = "PMSCI-17"
  PCMCIA_DRIVER.0 = "pcms80nt"
  PCMCIA_HARDWARE.1 = "PMSCI_SCI"
  PCMCIA_DRIVER.1 = "pcms80nt"
  
[SCARDSI.WIN2000]
  PROVIDER = "Shining Technology"
  INF_FILENAME = "Pcms802k.INF"
  INF_FILEDIR = "SCardSI\\Win2000"

  FILENAME.0 = "Pcms802k.SYS"
  FILEDIR.0 = "SCardSI\\Win2000"

  DELDESC.0 = "Shining PCMCIA SCSI Controller Win2000"

  SERVICE_NAME.0 = "pcms802k"
  
[SPARCSI]
  README_LABEL = "View SparCSI Readme"
  README_COMMAND = "notepad.exe SparCSI\\SparCSI.txt"
  WEBLINK_LABEL = "Visit SparCSI Web Page"
  TYPE = SPARCSI
  NAME = "SparCSI EPP Parallel Port - SCSI Adapter"
  DESCRIPTION = "The SparCSI EPP Parallel Port - SCSI Adapter allows for plug&play support for up to 7 SCSI devices through an EPP-compatable Parallel Port."
  BITMAP = "Sparcsi.bmp"
  ACTION_TITLE = "Shining Technology SparCSI AutoInstaller"
  INST_REQUEST = "Install SparCSI Drivers"
  UNINST_REQUEST = "Uninstall SparCSI Drivers"
  INST_TITLE = "Shining Technology SparCSI Installation"
  INST_WELCOME = "This utility will install drivers for your SparCSI EPP Parallel Port - SCSI adaptor." 
  INST_COMPLETE = "The installation is complete. If the device was inserted during installation, it is ready for use.  No reboot is required.\n\nIf the device is not connect, connect the device and reboot the computer to begin use."
  UNINST_TITLE = "Shining Technology SparCSI Uninstallation"
  UNINST_WELCOME = "This utility will uninstall and remove drivers for your SparCSI EPP Parallel Port - SCSI adaptor."

[SPARCSI.WIN9X]
  PROVIDER = "Shining Technology"
  INF_FILENAME = "PRS8095.INF"
  INF_FILEDIR = "SparCSI\\Win95"

  FILENAME.0 = "prs8095.mpd"
  FILEDIR.0 = "SparCSI\\Win95"

  DELDESC.0 = "Shining Technology Parallel/SCSI-PRS80 Adapter"

  INSTDESC = "Shining Technology Parallel/SCSI-PRS80 Adapter"

[SPARCSI.NT]
  SERVICE_NAME.0 = "prs80nt"
  SERVICE_DESC.0 = "Shining Parallel/SCSI Adapter"
  SERVICE_FILE.0 = "prs80nt.sys"
  SERVICE_MSGFILE.0 = "%SystemRoot%\\System32\\IoLogMsg.dll"
  SERVICE_MSGTYPE.0 = 7

  FILENAME.0 = "prs80nt.sys"
  FILEDIR.0 = "SparCSI\\NT"
  
[PRIDE]
  README_LABEL = "View PRIDE Readme"
  README_COMMAND = "notepad.exe PRIDE\\Pride.txt"
  WEBLINK_LABEL = "Visit PRIDE Web Page"
  TYPE = KINGBYTE
  NAME = "PRIDE EPP Parallel Port - IDE Adapter"
  DESCRIPTION = "The PRIDE EPP Parallel Port - IDE Adapter allows support for IDE devices through a standard EPP parallel port."
  BITMAP = "PRIDE.BMP" 
  ACTION_TITLE = "Shining Technology PRIDE AutoInstaller"
  INST_REQUEST = "Install PRIDE Drivers"
  UNINST_REQUEST = "Uninstall PRIDE Drivers"
  INST_TITLE = "Shining Technology PRIDE Installation"
  INST_WELCOME = "This utility will install drivers for your PRIDE EPP Parallel Port  - ATAPI adaptor." 
  UNINST_TITLE = "Shining Technology PRIDE Uninstallation"
  UNINST_WELCOME = "This utility will uninstall and remove drivers for your PRIDE EPP Parallel Port - ATAPI adaptor."

[PRIDE.WIN9X]
  PROVIDER = "KingByte Information Corp."
  INF_FILENAME = "kbide.INF"
  INF_FILEDIR = "."

  FILENAME.0 = "kbide.mpd"
  FILEDIR.0 = "."

  DELDESC.0 = "KingByte Parallel to IDE/ATAPI Driver V2.0 "
  DELDESC.1 = "KingByte Parallel to IDE/ATAPI Driver Beta 1 "

  INSTDESC = "KingByte Parallel to IDE/ATAPI Driver V2.0 "

[PRIDE.NT]
  SERVICE_NAME.0 = "KBide"
  SERVICE_DESC.0 = "Shining Parallel/IDE Adapter"
  SERVICE_FILE.0 = "KBide.sys"
  SERVICE_MSGFILE.0 = "%SystemRoot%\\System32\\IoLogMsg.dll"
  SERVICE_MSGTYPE.0 = 7

  FILENAME.0 = "KBide.sys"
  FILEDIR.0 = "."


[FWIDE330]
  TYPE = OXFORD
  NAME = "Firewire/IDE Adapter 400( 3 Amp, daisy-chain, S400 )"
  README_LABEL = "View 1394IDE Readme"
  README_COMMAND = "notepad.exe FWIDE330\\FWIDE.txt" 
  WEBLINK_LABEL = "Visit 1394IDE Web Page"
  DESCRIPTION = "The 1394 - IDE Adapter allows for plug&play support for IDE devices through a 1394 ("Firewire") connection."
  BITMAP = "FWIDE330.bmp"
  ACTION_TITLE = "Shining Technology 1394IDE AutoInstaller"
  INST_REQUEST = "Install 1394IDE Drivers"
  UNINST_REQUEST = "Uninstall 1394IDE Drivers"
  INST_TITLE = "Shining Technology 1394IDE Installation"
  INST_WELCOME = "This utility will install drivers for your 1394IDE 1394  - ATAPI adaptor."
  INST_READY = "No drivers are required for this device in Win98SE.  However, an update to the operating system must be installed to ensure reliable operation.\n\nReading the readme by clicking the "View Readme" button is recommended before beginning this update."
  INST_INPROGRESS = "Attempting to start Microsoft Win98SE operating system upgrade"
  INST_COMPLETE = "The installation is complete. No reboot is required."

[FWIDE330.WIN98SE]
  OS_UPGRADE_FILEPATH = "1394win98.exe"


[USBIDE100]
  TYPE = USBIDE
  NAME = "External USB 1.1 - IDE Converter"
  README_LABEL = "View USB 1.1/IDE Readme"
  README_COMMAND = "notepad.exe USBIDE100\\USBIDE.txt"
  WEBLINK_LABEL = "Visit USB 1.1/IDE Web Page"
  DESCRIPTION = "The USB 1.1 / IDE Adapter allows for plug&play support for IDE devices through a USB 1.1 port."
  BITMAP = "USBIDE100.bmp"
  ACTION_TITLE = "Shining Technology USB 1.1 / IDE Adapter AutoInstaller"
  INST_REQUEST = "Install USB 1.1 / IDE Drivers"
  UNINST_REQUEST = "Uninstall USB 1.1 / IDE Drivers"
  INST_TITLE = "Shining Technology USB 1.1 / IDE Installation"
  INST_WELCOME = "This utility will install drivers for your USB 1.1 to ATAPI adaptor." 
  INST_COMPLETE = "The installation is complete.  Turn on device power switch
  and insert it into any USB ports to begin use.  No reboot is required."
  UNINST_TITLE = "Shining Technology USB 1.1 / IDE Adapter Uninstallation"
  UNINST_WELCOME = "This utility will uninstall and remove drivers for your USB 1.1 to ATAPI Adapter."

[USBIDE100.WIN9X]
  PROVIDER = "Shining Technology"
  INF_FILENAME = "BOT.INF"
  INF_FILENAME2 = "BOTSCSI.INF"
  INF_FILEDIR = "USBIDE100\\Win98SE"

  FILENAME.0 = "BOTSCSI.MPD"
  FILEDIR.0 = "USBIDE100\\Win98SE"

  FILENAME.WDM.0 = "BOT.SYS"
  FILEDIR.WDM.0  = "USBIDE100\\Win98SE"

  DISKVXD_FILEDIR = "USBIDE100\\Win98SE"

  DELDESC.0 = "Shining USB to ATAPI Converter"
  DELDESC.1 = "Shining USB to ATAPI SCSI Driver"

[USBIDE100.WIN98SE]
  OS_UPGRADE_FILEPATH = "1394win98.exe"

[USBIDE100.WIN2000]
  PROVIDER = "Shining Technology"
  INF_FILENAME = "BOT2K.INF"
  INF_FILENAME2 = "BOTSCSI2K.INF"
  INF_FILEDIR = "USBIDE100\\Win2000"

  FILENAME.0 = "BOT2K.SYS"
  FILEDIR.0 = "USBIDE100\\Win2000"
  FILENAME.1 = "BOTSCSI2K.SYS"
  FILEDIR.1 = "USBIDE100\\Win2000"

  DELDESC.0 = "Shining USB to ATAPI Converter"
  DELDESC.1 = "Shining USB to ATAPI SCSI Driver"

  SERVICE_NAME.0 = "bot"
  SERVICE_NAME.1 = "botscsi"


[CBSIDE400]
  README_LABEL = "View PC card/UDMA Readme"
  README_COMMAND = "notepad.exe CBSIDE400\\CBSIDE400.txt"
  WEBLINK_LABEL = "Visit PC Card/UDMA Web Page"
  TYPE = GENERICPNP 
  NAME = "Cardbus to IDE UltraDMA Adapter"
  DESCRIPTION = "The CardBus to IDE UltraDMA Adapter( CBSIDE400 ) allows for plug&play support for ATA/UltraDMA devices through a CardBus interface slot."
  BITMAP = "CBSIDE400.bmp"
  ACTION_TITLE = "Shining Technology Cardbus - IDE UltraDMA Adapter AutoInstaller"
  INST_REQUEST = "Cardbus - IDE UltraDMA Adapter Drivers"
  UNINST_REQUEST = "Cardbus - IDE UltraDMA Adapter Drivers"
  INST_TITLE = "Shining Technology Cardbus - IDE UltraDMA Adapter Installation"
  INST_WELCOME = "This utility will install drivers for your Cardbus - IDE UltraDMA Adapter ." 
  INST_COMPLETE = "The installation is complete.  Insert the Cardbus - IDE UltraDMA Adapter into any compatible hardware slot to begin use.  No reboot is required."
  UNINST_TITLE = "Shining Technology Cardbus - IDE UltraDMA Adapter Uninstallation"
  UNINST_WELCOME = "This utility will uninstall and remove drivers for your Cardbus - IDE UltraDMA Adapter ."

[CBSIDE400.WIN9X]
  PROVIDER = "Shining Technology"
  INF_FILENAME.0 = "STUDMA9X.INF"
  INF_FILEDIR.0 = "CBSIDE400\\WIN9X"
  INF_DEVCLASS.0 = "hdc"

  FILENAME.0 = "STUDMA9X.MPD"
  FILEDIR.0 = "CBSIDE400\\WIN9X"
  FILETARGET.0 = "IOS"
  FILENAME.1 = "stuprop.dll"
  FILEDIR.1 = "CBSIDE400\\WIN9X"
  FILETARGET.1 = "SYS"

  DEL_DESC.0 = "Shining CBSIDE400 UDMA IDE Controller"
  DEL_DEVCLASS.0 = "hdc"

[CBSIDE400.NT]
  SERVICE_NAME.0 = "studmant"
  SERVICE_DESC.0 = "Shining CBSIDE400 UDMA Controller"
  SERVICE_FILE.0 = "studmant.sys"
  SERVICE_MSGFILE.0 = "%SystemRoot%\\System32\\IoLogMsg.dll"
  SERVICE_MSGTYPE.0 = 7
  SERVICE_LOADGROUP.0 = "SCSI Miniport" 

  FILENAME.0 = "studmant.sys"
  FILEDIR.0 = "CBSIDE400\\WinNT"
  FILETARGET.0 = "SVC"

  PCMCIA_PCI.0 = "14E6_610_1103_5"
  PCMCIA_MANUFACTURE.0 = "Shining"
  PCMCIA_PRODUCT.0 = "CBSIDE400"
  PCMCIA_DEVICETYPE.0 = "SCSI"
  PCMCIA_DRIVER.0 = "studmant"

  REG_NAME.0 = "LM\\SYSTEM\\CurrentControlSet\\Services\\studmant\\Parameters\\Device0\\DriverParameters\\AdpterXferModeSetting"
  REG_VALUE.0 = "NEW SZ:0x22222222"

[CBSIDE400.WIN2000]
  PROVIDER = "Shining Technology"
  INF_FILENAME.0 = "studma2k.INF"
  INF_FILEDIR.0 = "CBSIDE400\\Win2k"
  INF_DEVCLASS.0 = "hdc"

  FILENAME.0 = "STUDMA2K.SYS"
  FILEDIR.0 = "CBSIDE400\\Win2K"
  FILETARGET.0 = "SVC"

  DEL_DESC.0 = "Shining CBSIDE400 UDMA Controller Win2000"
  DEL_DEVCLASS.0 = "hdc"

  SERVICE_NAME.0 = "studma2k"


[256BFW]
  TYPE = OXFORD
  NAME = "CitiDISK Jr. 256BFW Built-in with Firewire Function" 
  README_LABEL = "CitiDISK Jr. Firewire Readme"
  README_COMMAND = "notepad.exe FWIDE330\\FWIDE.txt" 
  WEBLINK_LABEL = "Visit 1394IDE Web Page"
  DESCRIPTION = "The CitiDISK Jr. Firewire allows for plug&play support for IDE devices through a 1394 ("Firewire") connection."
  BITMAP = "256BFW.bmp"
  ACTION_TITLE = "Shining Technology CitiDISK Jr. Firewire AutoInstaller"
  INST_REQUEST = "CitiDISK Jr. Firewire Drivers"
  UNINST_REQUEST = "CitiDISK Jr. Firewire Drivers"
  INST_TITLE = "Shining Technology CitiDISK Jr. Firewire Installation"
  INST_WELCOME = "This utility will install drivers for your CitiDISK Jr. Firewire device."
  INST_READY = "No drivers are required for this device in Win98SE.  However, an update to the operating system must be installed to ensure reliable operation.\n\nReading the readme by clicking the "View Readme" button is recommended before beginning this update."
  INST_INPROGRESS = "Attempting to start Microsoft Win98SE operating system upgrade"
  INST_COMPLETE = "The installation is complete. No reboot is required."

[256BFW.WIN98SE]
  OS_UPGRADE_FILEPATH = "1394win98.exe"


[256BFWUSB]
  TYPE = UNAVAILABLE
  NAME = "CitiDISK Jr. 256BFWUSB Firewire & USB1.1 integrated"
  README_LABEL = "Firewire and USB1.1 Readme"
  README_COMMAND = "notepad.exe USBIDE110\\USBIDE110.txt"
  WEBLINK_LABEL = "Firewire and USB1.1 Web Page"
  DESCRIPTION = "The CitiDISK Jr. Firewire and USB1.1 allow for plug&play support for ATA devices through Firewire or USB 1.1 port."
  BITMAP = "256BFWUSB.bmp"
  ACTION_TITLE = "Shining Technology CitiDISK Jr. Firewire and USB1.1 AutoInstaller"
  INST_REQUEST   = "CitiDISK Jr. Firewire/USB Drivers"
  UNINST_REQUEST = "CitiDISK Jr. Firewire/USB Drivers"
  INST_TITLE = "Shining Technology CitiDISK Jr. Firewire/USB1.1 Installation"
  INST_WELCOME = "This utility will install drivers for your CitiDISK Jr. Firewire/USB1.1 device." 
  INST_COMPLETE = "The installation is complete.  Turn on device power switch
  and insert it into any Firewire or USB ports to begin use.  No reboot is required."
  UNINST_TITLE = "Shining Technology CitiDISK Jr. Firewire/USB1.1 Uninstallation"
  UNINST_WELCOME = "This utility will uninstall and remove drivers for your CitiDISK Jr. Firewire/USB1.1 Drivers."

[256BFWUSB.WIN95]
  TYPE = UNAVAILABLE

[256BFWUSB.WIN98SE]
  TYPE = GENERICPNP
  PROVIDER = "Shining Technology"
  INF_FILENAME.0 = "SHSTRPDR.INF"
  INF_FILEDIR.0 = "USBIDE110\\Win98"
  INF_DEVCLASS.0 = "SHSTRPDRClass"
  INF_FILENAME.1 = "SHSTRWDM.INF"
  INF_FILEDIR.1 = "USBIDE110\\Win98"
  INF_DEVCLASS.1 = "USB"

  FILENAME.0 = "SHSTRPDR.PDR"
  FILEDIR.0 = "USBIDE110\\Win98"
  FILETARGET.0 = "IOS"

  FILENAME.1 = "SHSTRWDM.SYS"
  FILEDIR.1  = "USBIDE110\\Win98"
  FILETARGET.1 = "WDM"

  DEL_DESC.0 = "Shining USB110/ATA Port Driver"
  DEL_DEVCLASS.0 = "SHSTRPDRClass"
  DEL_DESC.1 = "Shining USB110/ATA Mass Storage Class Driver"
  DEL_DEVCLASS.1 = "USB"

  OS_UPGRADE_FILEPATH = "1394win98.exe"

[256BFWUSB.WINME]
  TYPE = BUILTIN

[256BFWUSB.WIN2000]
  TYPE = BUILTIN


[256USB]
  TYPE = UNAVAILABLE
  NAME = "CitiDISK Jr. 256USB Built-in with USB1.1 Function"
  README_LABEL = "CitiDISK Jr. USB1.1 Readme"
  README_COMMAND = "notepad.exe USBIDE110\\USBIDE110.txt"
  WEBLINK_LABEL = "CitiDISK Jr. USB1.1 Web Page"
  DESCRIPTION = "The CitiDISK Jr. allows for plug&play support for ATA devices through USB 1.1 port."
  BITMAP = "256USB.bmp"
  ACTION_TITLE = "Shining Technology CitiDISK Jr. USB1.1 AutoInstaller"
  INST_REQUEST = "CitiDISK Jr. USB1.1 Drivers"
  UNINST_REQUEST = "CitiDISK Jr. USB1.1 Drivers"
  INST_TITLE = "Shining Technology CitiDISK Jr. USB1.1 Installation"
  INST_WELCOME = "This utility will install drivers for your CitiDISK Jr. USB1.1 device." 
  INST_COMPLETE = "The installation is complete.  Turn on device power switch
  and insert it into any USB ports to begin use.  No reboot is required."
  UNINST_TITLE = "Shining Technology CitiDISK Jr. USB1.1 Uninstallation"
  UNINST_WELCOME = "This utility will uninstall and remove drivers for your CitiDISK Jr. USB1.1 Drivers."

[256USB.WIN95]
  TYPE = UNAVAILABLE

[256USB.WIN98SE]
  TYPE = GENERICPNP
  PROVIDER = "Shining Technology"
  INF_FILENAME.0 = "SHSTRPDR.INF"
  INF_FILEDIR.0 = "USBIDE110\\Win98"
  INF_DEVCLASS.0 = "SHSTRPDRClass"
  INF_FILENAME.1 = "SHSTRWDM.INF"
  INF_FILEDIR.1 = "USBIDE110\\Win98"
  INF_DEVCLASS.1 = "USB"

  FILENAME.0 = "SHSTRPDR.PDR"
  FILEDIR.0 = "USBIDE110\\Win98"
  FILETARGET.0 = "IOS"

  FILENAME.1 = "SHSTRWDM.SYS"
  FILEDIR.1  = "USBIDE110\\Win98"
  FILETARGET.1 = "WDM"

  DEL_DESC.0 = "Shining USB110/ATA Port Driver"
  DEL_DEVCLASS.0 = "SHSTRPDRClass"
  DEL_DESC.1 = "Shining USB110/ATA Mass Storage Class Driver"
  DEL_DEVCLASS.1 = "USB"

[256USB.WINME]
  TYPE = BUILTIN

[256USB.WIN2000]
  TYPE = BUILTIN

[256BFWUSB2]
  TYPE = UNAVAILABLE
  NAME = "CitiDISK Jr. 256BFWUSB2 Firewire & USB 1.1/2.0"
  README_LABEL = "Firewire and USB2.0 Readme"
  README_COMMAND = "notepad.exe USBIDE200\\USBIDE200.txt"
  WEBLINK_LABEL = "Firewire and USB2.0 Web Page"
  DESCRIPTION = "The CitiDISK Jr. Firewire and USB2.0 allow for plug&play support for ATA devices through Firewire or USB 1.1 port."
  BITMAP = "256BFWUSB2.bmp"
  ACTION_TITLE = "Shining Technology CitiDISK Jr. Firewire and USB2.0 AutoInstaller"
  INST_REQUEST   = "CitiDISK Jr. Firewire/USB2.0 Driver"
  UNINST_REQUEST = "CitiDISK Jr. Firewire/USB2.0 Driver"
  INST_TITLE = "Shining Technology CitiDISK Jr. Firewire/USB2.0 Installation"
  INST_WELCOME = "This utility will install drivers for your CitiDISK Jr. Firewire/USB2.0 device." 
  INST_COMPLETE = "The installation is complete.  Turn on device power switch
  and insert it into any Firewire or USB ports to begin use.  No reboot is required."
  UNINST_TITLE = "Shining Technology CitiDISK Jr. Firewire/USB2.0 Uninstallation"
  UNINST_WELCOME = "This utility will uninstall and remove drivers for your CitiDISK Jr. Firewire/USB2.0 Drivers."

[256BFWUSB2.WIN95]
  TYPE = UNAVAILABLE

[256BFWUSB2.WIN98SE]
  TYPE = GENERICPNP
  OS_UPGRADE_FILEPATH = "1394win98.exe"
  OS_UPGRADE_FILEPATH = "USBIDE200\\U2v2_02.exe"

[256BFWUSB2.WINME]
  TYPE = GENERICPNP
  OS_UPGRADE_FILEPATH = "USBIDE200\\U2v2_02.exe"

[256BFWUSB2.WIN2000]
  TYPE = GENERICPNP
  OS_UPGRADE_FILEPATH = "USBIDE200\\U2v2_02.exe"


[USBIDE200]
  TYPE = UNAVAILABLE
  NAME = "External USB/IDE 1.1 and 2.0 Converter"
  README_LABEL = "USB2.0 Readme"
  README_COMMAND = "notepad.exe USBIDE200\\USBIDE200.txt"
  WEBLINK_LABEL = "USB2.0 Web Page"
  DESCRIPTION = "The USB/IDE 2.0 adapter allows for plug&play support for ATA devices through USB 1.1/2.0 port."
  BITMAP = "usbide200.bmp"
  ACTION_TITLE = "Shining Technology USB2.0 Adapter AutoInstaller"
  INST_REQUEST   = "USB2.0 Driver"
  UNINST_REQUEST = "USB2.0 Driver"
  INST_TITLE = "Shining Technology USB2.0 Installation"
  INST_WELCOME = "This utility will install drivers for your USB/IDE 2.0 device." 
  INST_COMPLETE = "The installation is complete.  Turn on device power switch
  and insert it into any USB ports to begin use.  No reboot is required."
  UNINST_TITLE = "Shining Technology CitiDISK Jr. Firewire/USB2.0 Uninstallation"
  UNINST_WELCOME = "This utility will uninstall and remove drivers for your USB2.0 Adapter Drivers."

[USBIDE200.WIN95]
  TYPE = UNAVAILABLE

[USBIDE200.WIN98SE]
  TYPE = GENERICPNP
  OS_UPGRADE_FILEPATH = "1394win98.exe"
  OS_UPGRADE_FILEPATH = "USBIDE200\\TPP_INST_5_04.exe"
  OS_UPGRADE_FILEPATH = "USBIDE200\\U2v2_02.exe"

[USBIDE200.WINME]
  TYPE = GENERICPNP
  OS_UPGRADE_FILEPATH = "USBIDE200\\TPP_INST_5_04.exe"
  OS_UPGRADE_FILEPATH = "USBIDE200\\U2v2_02.exe"

[USBIDE200.WIN2000]
  TYPE = GENERICPNP
  OS_UPGRADE_FILEPATH = "USBIDE200\\TPP_INST_5_04.exe"
  OS_UPGRADE_FILEPATH = "USBIDE200\\U2v2_02.exe"

[FWIDE450]
  TYPE = OXFORD
  NAME = "Firewire - IDE Converter 450 ( 1.5 Amp, S400 )"
  README_LABEL = "View 1394IDE Readme"
  README_COMMAND = "notepad.exe FWIDE450\\FWIDE.txt" 
  WEBLINK_LABEL = "Visit 1394IDE Web Page"
  DESCRIPTION = "The 1394 - IDE Adapter allows for plug&play support for IDE devices through a 1394 ("Firewire") connection."
  BITMAP = "FWIDE450.bmp"
  ACTION_TITLE = "Shining Technology 1394IDE AutoInstaller"
  INST_REQUEST = "Install 1394IDE Drivers"
  UNINST_REQUEST = "Uninstall 1394IDE Drivers"
  INST_TITLE = "Shining Technology 1394IDE Installation"
  INST_WELCOME = "This utility will install drivers for your 1394IDE 1394  - ATAPI adaptor."
  INST_READY = "No drivers are required for this device in Win98SE.  However, an update to the operating system must be installed to ensure reliable operation.\n\nReading the readme by clicking the "View Readme" button is recommended before beginning this update."
  INST_INPROGRESS = "Attempting to start Microsoft Win98SE operating system upgrade"
  INST_COMPLETE = "The installation is complete. No reboot is required."

[FWIDE450.WIN98SE]
  OS_UPGRADE_FILEPATH = "1394win98.exe"

[CBSUSB2]
  TYPE = UNAVAILABLE
  NAME = "CardBus( PCI )/USB2.0 Host Controller"
  README_LABEL = "Cardbus( PCI ) USB2.0 Readme"
  README_COMMAND = "notepad.exe CBSUSB2\\cbsusb2.txt"
  WEBLINK_LABEL = "USB2.0 Web Page"
  DESCRIPTION = "The CardBus( PCI )/ USB 2.0 host controller adds in USB2.0 ports for your computer." 
  BITMAP = "cbsusb2.bmp"
  ACTION_TITLE = "Shining Technology CardBus( PCI ) / USB2.0 Host Controller AutoInstaller"
  INST_REQUEST   = "Cardbus / USB2.0 Driver"
  UNINST_REQUEST = "Cardbus / USB2.0 Driver"
  INST_TITLE = "Shining Technology USB2.0 Installation"
  INST_WELCOME = "This utility will install drivers for your CardBus( PCI ) / USB2.0 host controller." 
  INST_COMPLETE = "The installation is complete.   No reboot is required."
  UNINST_TITLE = "Shining Technology CardBus( PCI ) / USB2.0 Uninstallation"
  UNINST_WELCOME = "This utility will uninstall and remove drivers for your CardBus( PCI ) / USB2.0 host controller drivers."

[CBSUSB2.WIN95]
  TYPE = UNAVAILABLE

[CBSUSB2.WIN98SE]
  TYPE = GENERICPNP
  OS_UPGRADE_FILEPATH = "1394win98.exe"
  OS_UPGRADE_FILEPATH = "CBSUSB2\\U2v2_02.exe"

[CBSUSB2.WINME]
  TYPE = GENERICPNP
  OS_UPGRADE_FILEPATH = "CBSUSB2\\U2v2_02.exe"

[CBSUSB2.WIN2000]
  TYPE = GENERICPNP
  OS_UPGRADE_FILEPATH = "CBSUSB2\\U2v2_02.exe"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web1, load: 0.88