;***************************************************************************** ; ; Name: kwc_vxd.inf ; ; Function: ; Install the Kyocera USB to Phone Cable Drivers (VCOMM) ; ; Copyright (c) 2001 MCCI ; ; $Id: upper.inf,v 1.12 2002/04/11 14:34:43 greg Exp $ ; ; KWC is a registered trademark of Kyocera Wireless Corporation ; ; NOTICE: This software is licensed, not sold. Any modification of this ; inf file to change the reference to an operating system or to change the ; reference to a device is not permitted unless authorized in writing by ; Moore Computer Consultants, Inc.. ; ;***************************************************************************** [Version] signature="$CHICAGO$" Class=Ports ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} Provider=%Provider% DriverVer=07/23/2002, 3.34.0.2700 ;----------------------------------------------------------------------------- ; No files are copied by this file.. no filecopy init declarations are here. ;----------------------------------------------------------------------------- ;----------------------------------------------------------------------------- ; Table of Contents ;----------------------------------------------------------------------------- [Manufacturer] %Kwc%=KWC ;----------------------------------------------------------------------------- ; Device-by-device entries ;----------------------------------------------------------------------------- [KWC] %PortDesc% = KWC.Install, KWC_CR\{4BC7AFF6-4F81-4779-8E64-79FCEB422A0D} ;----------------------------------------------------------------------------- ; The exclude-from-select stuff ;----------------------------------------------------------------------------- [ControlFlags] ExcludeFromSelect = * ;----------------------------------------------------------------------------- ; Installation instructions ;----------------------------------------------------------------------------- [KWC.Install] AddReg = KWC.W95AddReg,KWC.W95Overrides [KWC.Install.Nt] ;----------------------------------------------------------------------------- ; Registry ;----------------------------------------------------------------------------- ;**** here's the stuff for W95 ports. ;**** it's in this INF file, but we'll not use it until we get enumerated. [KWC.W95AddReg] HKR,,DevLoader,,*vcomm HKR,,PortDriver,,kwc_comm.vxd HKR,,Contention,,kwc_vcd.vxd HKR,,DCB,3,1C,00,00,00, 00,C2,01,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00 HKR,,PortSubClass,1,01 HKR,,ConfigDialog,,serialui.dll HKR,,EnumPropPages,,"serialui.dll,EnumPropPages" ;----------------------------------------------------------------------------- ; Logical Configurations ;----------------------------------------------------------------------------- [KWC.W95Overrides] ; ;--- Config for anywhere- COMx IRQ Any HKR,Override,0000,1, \ 00,04,00,00,00,00,00,00, \ ;*** I/O Range 0 *** 20,00,00,00, \ ; total length of io resource descriptor 02,00,00,00, \ ; ResType_IO = 0x00000002 01,00,0C,00, \ ; IOD_count / IOD_Type = 0x0c 00,00,00,00, \ ; IOD_Alloc_Base / IOD_Alloc_End 00,00,00,00, \ ; IOD_DesFlags / IOD_Alloc_Alias / IOD_Alloc_Decode F8,FF,08,00, \ ; IOR_Align / IOR_nPorts 00,01,FF,03, \ ; IOR_Min / IOR_Max 00,00,00,00, \ ; IOR_RangeFlags / IOR_Alias / IOR_Decode ;*** IRQ *** 10,00,00,00, \ ; total length of irq resource descriptor 04,00,00,00, \ ; ResType_IRQ - 0x00000004 01,00,00,00, \ ; IRQD_Flags / IRQD_Alloc_Num FF,FF,00,00, \ ; IRQD_Req_Mask / IRQD_Reserved ;*** TERMINATOR *** 00,00,00,00 ; ;--- Config for anywhere- COMx IRQ None HKR,Override,0001,1, \ 00,04,00,00,00,00,00,00, \ ;*** I/O Range 0 *** 20,00,00,00, \ ; total length of io resource descriptor 02,00,00,00, \ ; ResType_IO = 0x00000002 01,00,0C,00, \ ; IOD_count / IOD_Type = 0x0c 00,00,00,00, \ ; IOD_Alloc_Base / IOD_Alloc_End 00,00,00,00, \ ; IOD_DesFlags / IOD_Alloc_Alias / IOD_Alloc_Decode F8,FF,08,00, \ ; IOR_Align / IOR_nPorts 00,01,FF,03, \ ; IOR_Min / IOR_Max 00,00,00,00, \ ; IOR_RangeFlags / IOR_Alias / IOR_Decode ;*** TERMINATOR *** 00,00,00,00 ;----------------------------------------------------------------------------- ; STRINGS ;----------------------------------------------------------------------------- [Strings] ;BEGIN ENG - US English Strings Provider = "Kyocera Wireless Corporation" Kwc = "Kyocera Wireless Corporation" PortDesc = "Kyocera USB to Phone Cable Drivers (VCOMM)" CustomerDataPath = "KWC USB to Phone Cable" DriverSet = "KWC USB to Phone Cable Software" UninstallFile = "KWC_Uninstall.exe" McciOptions = "Uninstallable" ;END ENG - US English Strings ;--- strings following this line should not be localized --- ;*** end of file ***Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.