W940S3.O Ver 1.00
Winbond Electronics Corporation
01/27/97
Description:
1. W940S3.O is a SCO UNIX 3.x (Runtime v3.2.4x with TCP/IP v.1.2.1) driver.
This driver is allowed to install on 4 LAN cards with Winbond 940 chips.
This driver will automatically get IOBASE and IRQ of 940 chips from PCI
Configuration Space.
If there are more 940 cards than the installed board number, this driver
will automatically select 940 cards to load.
If the installed board number is more than the 940 card number, this
driver will show warning messaage, and exits.
Installation:
1. copy below files into root directory of one floopy disk.
w940s3.o 940 SCO UNIX 3.x driver
setup setup program
space.c used by netconfig
info used by netconfig
init used by netconfig
master used by netconfig
node used by netconfig
reconf used by netconfig
remove used by netconfig
system used by netconfig
2. Login as root user (on maintenance mode).
3. Insert the floopy disk into floopy driver,
copy setup file to SCO OS and change its attribute by below instructions
doscp a:setup .
chmod +x setup
and execute setup
./setup a:
Then several files in item 1 will be copied to the right place.
4. Execute netconfig :
the user interface may be as below
Available options:
1. Add a chain
2. Remove a chain
3. Reconfigure an element in a chain
4. Quit
Select option :
>> Select 1. Add a chain
Select top level of chain to Add or q to quit:
>> Select 1. sco_tcp
Select next level of chain to Add or q to quit:
>> Select the item number with the description of
w940s30 Winbond W89C940 Ethernet Adapter, board 0.
Add chain sco_tcp->w940s30 (y/n)
>> type 'y'
Enter the internet address of this interface
>> type your IP address
Enter the netmask for this interface
>> type your netmask
Does the interface use a broadcast address of all 1's (y/n) ?
>> press Enter key
Enter the boardcast address for this interface
>> press Enter key
Are these values correct ? (y/n)
>> type 'y'
Enter local host name or enter q to quit
>> press your local host name
XX Pseudo ttys are currently configured, do you want to:
1. Add Pseudo ttys
2. Remove Pseudo ttys
Select an option or enter q to quit [q]
>> press Enter key
YY TCP Connections currently configured, do you want to:
1. Add TCP Connections
2. Remove TCP Connections
Select an option or enter q to quit [q]
>> press Enter key
Available options:
1. Add a chain
2. Remove a chain
3. Reconfigure an element in a chain
4. Quit
Select option :
>> type 'q'
Do you want to relink to kernel now ?
>> type 'y'
Do you want this kernel to boot by default (y/n)
>> type 'y'
Do you want the kernel environment rebuilt (y/n)
>> type 'y'
5. Reboot the SCO UNIX 3.x OS by order reboot command.
Use:
1. If you want to run the driver on another 940 card, perform the following
steps:
a. Login as root user (on maintenance mode).
b. Do the same step 4 in Installation, and Select the item number with
the description of
w940s31 Winbond W89C940 Ethernet Adapter, board 1.
c. Reboot the SCO UNIX 3.x OS by order reboot command.
Trouble Shooting
1. Message: 'w940s3: Initialization fails !
No Winbond 940 board existed !'
Solution: Make sure the 940 card is plugged into your system.
2. Message: 'w940s3: Initialization fails !
Winbond 940 board number < installed board number !
board 0: IRQ=Y, Ethernet ID=XX:XX:XX:XX:XX:XX'
Solution: Plug the sufficient 940 cards into your system.
Histories of Release:
***) 1.00, 01-27-1997
First release.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.