GENOA.INF Driver File Contents (v2000nt4.zip)

; GENOA.INF
;
; Installation inf for Genoa Systems Coporation display driver.
; Genoa Phantom 64 G2001/V2000/V2001/DX dirvers for Window NT 4.0
;

[Version]
Signature="$CHICAGO$"
Provider=%Genoa%
ClassGUID={4D36E968-E325-11CE-BFC1-08002BE10318}
Class=Display

[DestinationDirs]
DefaultDestDir  = 11
Genoa.Miniport  = 12  ; drivers
Genoa.Display   = 11  ; system32
;Genoa.ConfigFile= 12  ; config files to the drivers directory

COLORcopy.sys=11      ; KV2 color adjustment for YUV
COLORcopy.hlp=18

;
; Driver information
;

[Manufacturer]
%Genoa%   = Genoa.Mfg

;
; This section should be modified to reflect the chip strings the
; user will see in the Displays applet when the new driver is being
; installed from the driver diskette.
;
[Genoa.Mfg]
%Genoa% Phantom 64 G2001/V2000/V2001/DX = Genoa

;
; General installation section
;

[Genoa]
CopyFiles=Genoa.Miniport, Genoa.Display, COLORcopy.sys, COLORcopy.hlp

;
; File sections
;

[Genoa.Miniport]
Genoa.sys      ; miniport driver

[Genoa.Display]
Genoa.dll      ; display driver

;**************************************************************************
; Mode/Configuration File Installation
; ====================================
;
; To install a mode/refresh configuration file with the drivers:
;
; 1) Remove the leading ";" from the "%GenoaConfigFile%" line in the
;    [Genoa.ConfigFile] section below.  This will allow the configuration
;    file to be copied from the driver diskette to the target system.
; 2) Remove the leading ";" in the "HKR..." line in the [Genoa_Configuration]
;    section below.  This will place the configuration file name in the
;    Registry.
; 3) Set GenoaConfigFile to the mode/refresh filename in the [Strings] section
;    at the bottom of this file.
;
;**************************************************************************

[Genoa.ConfigFile]
;%GenoaConfigFile%     ; **** copy config file ****


[COLORcopy.sys]
S3COLOR.cpl,,,1
S3COLOR.cfg

[COLORcopy.hlp]
S3COLOR.hlp


;
; Service Installation
;

[Genoa.Services]
AddService = Genoa, 0x00000002, Genoa_Service_Inst, Genoa_EventLog_Inst

[Genoa_Service_Inst]
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 1                  ; SERVICE_SYSTEM_START
ErrorControl   = 0                  ; SERVICE_ERROR_IGNORE
LoadOrderGroup = Video
ServiceBinary  = %12%\Genoa.sys


[Genoa_EventLog_Inst]
AddReg = Genoa_EventLog_AddReg

[Genoa_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%SystemRoot%\System32\IoLogMsg.dll;%SystemRoot%\System32\drivers\Genoa.sys"
HKR,,TypesSupported,0x00010001,7


;
; Software Installation
;

[Genoa.SoftwareSettings]
AddReg = Genoa_SoftwareDeviceSettings
;AddReg = Genoa_Configuration   ; mode/refresh config file section
; AddReg = Genoa_AuroraSettings
AddReg =s3COLOR.AddReg

;
; This section is used to place the mode/refresh configuration filename
; in the Registry. (See [Genoa.ConfigFile] section above)
;

[Genoa_Configuration]
;HKR, , ModeCfgFile, %REG_EXPAND_SZ%, \SystemRoot\system32\drivers\%GenoaConfigFile%


[Genoa_SoftwareDeviceSettings]
HKR,, InstalledDisplayDrivers,     %REG_MULTI_SZ%, Genoa
HKR,, VgaCompatible,               %REG_DWORD%,    0

; [Genoa_AuroraSettings]
; HKR,, AuroraDisplayType, %REG_DWORD%, 0

;
; Source file information
;

[SourceDisksNames.x86]
1 = %DiskId%,,,""

[SourceDisksFiles]
Genoa.sys      = 1     ; all files on Disk 1
Genoa.dll      = 1
;%GenoaConfigFile%  = 1
s3COLOR.cpl=1
s3COLOR.cfg=1
s3COLOR.hlp=1

[s3COLOR.AddReg]
;HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\S3COLOR,DisplayName,,"s3 Color Control"
;HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\s3COLOR,UninstallString,,"RunDll setupx.dll,InstallHinfSection  COLORRemove 4  COLOR.inf"
;
HKLM,Software\S3\S3COLOR
HKLM,Software\S3\S3COLOR,Installed,0,1


[Strings]
;
; Non-Localizable Strings
;

REG_SZ         = 0x00000000
REG_MULTI_SZ   = 0x00010000
REG_EXPAND_SZ  = 0x00020000
REG_BINARY     = 0x00000001
REG_DWORD      = 0x00010001
SERVICEROOT    = System\CurrentControlSet\Services

;
; Localizable Strings
;

DiskId      = "Genoa Systems Corporation Installation DISK (VIDEO)"
GraphAdap   = "Graphics Adapter"
Genoa       = "Genoa Systems Corp."

;
; Add the name of the mode/refresh configuration file here. (See the
; [Genoa.Configuration] section above.  If no configuration file is used,
; set GenoaConfigFile = "".
;
; ex.   GenoaConfigFile = "modes765.cfg"
;
GenoaConfigFile = ""

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.43