Genoa Phantom 64 G2001/V2000/V2001/DX Windows NT 4.0 Display Driver
Version 1.0 Installation Instructions
------------------------------------------------------------------------
Install the Genoa Phantom 64 G2001/V2000/V2001/DX driver for Windows NT 4.0
---------------------------------------------------------
1. Start system with Windows NT 4.0 installed. Put Genoa Setup CD-ROM into
CD-ROM drive(e.g. D: or what ever).
2. IMPORTANT: When the "Please select the operating system to start..." message
is displayed, select "Windows NT Workstation Version 4.00 [VGA mode]".
3. From "Start", select the "Settings group", then click on the
"Control Panel" icon.
4. In the "Control Panel", double click on the "Display" icon.
5. In the "Settings" screen, click on the "Display Type..." button.
6. From the "Display Type" screen, and in the "Adapter Type" section, click
on the "Change..." button.
7. In the "Change Display" screen, click on the "Have Disk..." button.
8. From "Locate File" dialog box choose "My Computer" and to drive D:,
continue through "Phantom", "3D","Winnt.40" and "Genoa"(e.g. the Genoa
installation CD-ROM D:\PHANTOM\64_DX\WINNT.40\Genoa ) then click "OK".
9. "Genoa Systems Corporation.Phantom 64 G2000/V2000/V2001/DX" will be
highlighted. Click "OK".
10. From "Third-party Drivers", click on the "Yes" button to proceed.
11. If a message appears stating the driver is already installed on the
system, and asks if you want to use the current or new drivers, be sure
to select the "New" button.
12. If prompted for the driver diskette a second time, click on the
"Continue" button.
13. When the message "The drivers were successfully installed" is displayed,
remove the display driver diskette, then click on the "OK" button.
14. Back at the "Display Type" window, click on the "Close" button.
15. Back at the "Display Properties" window, click on the "Close" button.
16. When you see the "System Settings Change" window, asking if you wish to
restart your computer, click on the "Yes" window to reboot now.
Change Resolution, Color depth and Refresh rate
-----------------------------------------------
1. From the "My Computer" folder choose the "Control Panel" Folder.
2. Click on the Display icon then click "Settings".
3. Drug and drag the nut in "Desktop Area" to change the resolution.
4. Using the pull-down arrows in "Color Palette", "Font Size" and
"Refresh Frenqucy" to select the colors your system used, the font
size to display the characteristics and the refresh rate (Refresh
Frequency) you want.
5. Click "OK" after click on "TEST" button.
Observe test pattern to verify color and flicker etc. are acceptable.
Test pattern will disappear in a few seconds.
6. If test pattern was not acceptable, click NO and repeat steps 2 and 3.
Repeat the above process as needed.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.