; display.inf SD/SV series ;
; ;
; This is a Setup information file for display adapters. ;
; ;
; ;
; Rev Date By Remark ;
; -----+---------+----+--------------------------------- ;
; 0.01 27.12.94 kk Prerelease version for Win95 (M7) ;
; 0.02 kk renamed Mfg ;
; 0.03 11.01.95 kk miroMAGIG 40SV ergo PCI added ;
; 0.04 17.01.95 kk added lots of boards ;
; 0.05 23.02.95 stk Prerelease version for Win95 (M7+) ;
; with BitDepth-control ;
; 0.05 12.04.95 stk Neue DIB-Treiber ;
; 0.06 23.04.95 stk Nun gibts die ersten einigermaáen ;
; funktionstchtigen... ;
; 0.07 09.05.95 stk Nun gibts auch die VIDEO Karten und ;
; einen neuen VXD ;
; 0.08 13.07.95 pbe Anpassung an neue Hardware-Erkennung ;
; 0.09 17.07.95 pbe Vereinheitlichung ;
; 0.10 25.07.95 pbe Modusumstellung, 4 Bit Treiber ;
; 0.11 15.08.95 pbe miro 24-Bit und 4 Bit Treiber ;
; 0.12 17.08.95 pbe DDC-Erkennung aktiviert ;
; 0.13 18.08.95 stk Fehler mit hohen Auflsungen behoben ;
; 0.14 22.08.95 pbe "automatische" Konfiguration,Stretcher;
; 1.0 31.08.95 pbe Release-Version ;
; 1.1 11.10.95 stk DDRAW introduced... ;
; 1.11 17.10.95 pbe System.Ini wird von Unrat befreit ;
; 1.15 17.10.95 pbe Einige Anpassungen bei LogConfig ;
; 1.16 17.10.95 pbe Komprimierung der CARDxxxx Dateien ;
; 1.17 02.02.96 LaFi Es werden wieder ALLE modes in ;
; registry eingetragen. ver auf 4.0 !!! ;
; 1.18 09.12.96 ST WinTim Treiber für Single ;
; ;
; (C) 1994, 1995 miro Computer Products AG ;
[Version]
Class=DISPLAY
Signature="$Windows 95$"
Provider=%miro%
[SourceDisksFiles]
miromini.vxd=101
miroinit.dll=101
mirohw.dll=101
mirohw.in_=101
twinmon.inf=101
miromon.inf=101
; #+#+# Twin
mirotw95.vxd=101
mirotwin.drv=101
twinext.dll=101
twinext.hlp=101
; #+#+# Single
miro.drv=101
wtmiro.dll=101
mti.dll=101
mti.ini=101
mti_quad.ini=101
mirodd32.dll=101
; #+#+# Timings
timing.in_=101
monitor.in_=101
install.in_=101
ulla.in_=101
Card000d.in_=101
Card000e.in_=101
Card0010.in_=101
Card0017.in_=101
Card0018.in_=101
Card010d.in_=101
Card010e.in_=101
Card020d.in_=101
Card020e.in_=101
Card0210.in_=101
Card0211.in_=101
Card0310.in_=101
Card0311.in_=101
Card0410.in_=101
Card0411.in_=101
Card0510.in_=101
Card0610.in_=101
Card0710.in_=101
Card0810.in_=101
; #+#+# IShield
data.z = 101
SingTool.z = 101
_inst32i.ex_ = 101
_isdel.exe = 101
_setup.dll = 101
_setup.lib = 101
Disk1.id = 101
Setup.bmp = 101
Setup.exe = 101
Setup.ini = 101
Setup.ins = 101
Setup.nfo = 101
_setup.lib = 101
Setup.ins = 101
Setup.nfo = 101
setup.pkg = 101
kpin.exe = 101
liesmich.txt=101
readme.txt=101
; #+#+#
[SourceDisksNames]
101=%mirowin%,,
[miro.inis]
; Delete Sections:
system.ini,928.drv,*,,
system.ini,twinleft.drv,*,,
system.ini,twinright.drv,*,,
system.ini,mboot.description,*,,
win.ini,TintControl,*,,
; Delete single lines:
system.ini, boot.description, "displayinf2=",, 0
win.ini,Desktop, "3d=",, 0
system.ini, drivers, "MIRODCI=",, 0
system.ini, drivers, "DCI=",, 0
system.ini, boot, "FDISPLAY.DRV=",, 0
win.ini, Desktop, "TileWallpaper=",, 0
win.ini, Desktop, "Wallpaper=",, 0
; Copying the same Stuff that's necessary for a Tools-Installation only:
[miroINST_Copy]
data.z,,,2
SingTool.z,,,2
_inst32i.ex_,,,2
_isdel.exe,,,2
_setup.dll,,,2
_setup.lib,,,2
Disk1.id,,,2
Setup.bmp,,,2
Setup.exe,,,2
Setup.ini,,,2
Setup.ins,,,2
Setup.nfo,,,2
setup.pkg,,,2
kpin.exe,,,2
liesmich.txt
readme.txt
[miroINST_Copy_GER]
_setup.lib, German\_setup.lib,,2
Setup.ins, German\Setup.ins,,2
Setup.nfo, German\Setup.nfo,,2
setup.pkg, German\setup.pkg,,2
;[miroINST_Copy_FRE]
;_setup.lib, French\_setup.lib
;Setup.ins, French\Setup.ins
;Setup.nfo, French\Setup.nfo
;setup.pkg, French\setup.pkg
; #+#+#
[miroTwin.Copy]
; Dies sind die zu kopierenden Twin-Treiber
mirotwin.drv,,,2
mirotw95.vxd,,,2
miroinit.dll,,,2
mirohw.dll,,,2
[miroSingle.Copy]
; Dies sind die zu kopierenden Single-Treiber
miroinit.dll,,,2
miro.drv,,,2
miromini.vxd,,,2
wtmiro.dll,,,2
mti.dll,,,2
mirohw.dll,,,2
mirodd32.dll,,,2
[Inf.copy]
twinmon.inf,,,2
miromon.inf,,,2
;59niwt.fni,,,2
[Inf.Rename]
59niwt.fni=twin95.inf
[appsTwin.Copy]
mirohw.ini,mirohw.in_,,2
twinext.dll, twinext.dll,,2
twinext.hlp, twinext.hlp,,2
; #+#+# SKid-Ex: (copy, but no exec.:)
DelInst.exe ;
; #+#+#
[appsSingle.Copy]
mirohw.ini,mirohw.in_,,2
mti.ini,,,2
mti_quad.ini,,,2
; #+#+# SKid-Ex: (copy, but no exec.:)
DelInst.exe ;
; #+#+#
[appsTwin.Delete]
; #+#+# Single
mti.ini
mti_quad.ini
; #+#+# Pinboard
launch.dll,1
level1.dll,1
mclass.dll,1
singen.dll,1
single.dll,1
twin.dll,1
pinboard.exe,1
pinboard.ini,1
; #+#+# ScreenAdjust
wadjust.ini,1
wadjust.exe,1
[appsSingle.Delete]
; #+#+# Twin stuff
Twinext.dll
Twinext.hlp
; #+#+# Pinboard
launch.dll,1
level1.dll,1
mclass.dll,1
singen.dll,1
single.dll,1
twin.dll,1
pinboard.exe,1
pinboard.ini,1
; #+#+# ScreenAdjust
wadjust.ini,1
wadjust.exe,1
[Timings.Copy]
; Dies sind die zu kopierenden Timings
timing.ini,timing.in_,,2
monitor.ini,monitor.in_,,2
install.ini,install.in_,,2
ulla.ini,ulla.in_,,2
Card000d.ini,Card000d.in_,,2
Card000e.ini,Card000e.in_,,2
Card0010.ini,Card0010.in_,,2
Card0017.ini,Card0017.in_,,2
Card0018.ini,Card0018.in_,,2
Card010d.ini,Card010d.in_,,2
Card010e.ini,Card010e.in_,,2
Card020d.ini,Card020d.in_,,2
Card020e.ini,Card020e.in_,,2
Card0210.ini,Card0210.in_,,2
Card0211.ini,Card0211.in_,,2
Card0310.ini,Card0310.in_,,2
Card0311.ini,Card0311.in_,,2
Card0410.ini,Card0410.in_,,2
Card0411.ini,Card0411.in_,,2
Card0510.ini,Card0510.in_,,2
Card0610.ini,Card0610.in_,,2
Card0710.ini,Card0710.in_,,2
Card0810.ini,Card0810.in_,,2
[DestinationDirs]
; Das sind die Zielverzeichnisse fr die obigen Copy-Sektionen!
DefaultDestDir=11
Timings.Copy=10,miro\timing
appsTwin.Delete=10,miro\common
appsSingle.Delete=10,miro\common
appsSingle.Copy=10,miro\common
appsTwin.Copy=10,miro\common
Inf.Copy=17
; #+#+# SKid-Ex:
miroINST_Copy=10,miro\Install
miroINST_Copy_GER=10,miro\Install\German
;miroINST_Copy_FRE=10,miro\Install\French
; #+#+#
[Manufacturer]
"%miro%"=miro
[miro.LogConfig]
; Die Hardware ...
ConfigPriority=SUBOPTIMAL
IOConfig=3B0-3BB
IOConfig=3C0-3DF
IOConfig=42E8-42EB(FFFF:0200:)
MemConfig=A0000-AFFFF
MemConfig=C0000-C7FFF,D0000-D7FFF,E0000-E5FFF,E0000-E7FFF
MemConfig=B8000-BFFFF
MemConfig=4000000@01000000-ffffffff%fc000000
[Twin.DelReg]
; Kill prev. mons:
HKLM,Enum\Monitor\Default_Monitor\0001
HKLM,System\CurrentControlSet\Services\Class\Monitor\0000
[All.DelReg]
; Die zu lschenden Registry-Eintrge
HKR,,Ver
HKR,,DevLoader
HKR,,BoardId
HKR,,Identification
HKR,DEFAULT
HKR,MODES
HKR,INFO
HKR,CURRENT
HKLM,"miro\display"
HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion\Run\miroPINBOARD"
[ALLTwin.AddReg]
; Eintrge die fr alle Karten gleich sind
HKR,,ver,,4.0
HKR,,DevLoader,,*vdd
HKR,,MiroPath,,"%10%\miro"
HKR,DEFAULT,Mode,,"16,1600,600"
HKR,DEFAULT,drv,,mirotwin.drv
HKR,DEFAULT,vdd,,"*vdd,*vflatd"
HKR,DEFAULT,minivdd,,mirotw95.vxd
HKR,DEFAULT,RefreshRate,,-1
; HKR,DEFAULT,DDC,,"1"
; force twinmon:
HKLM,Enum\Monitor\Default_Monitor\0001,Class,,Monitor
HKLM,Enum\Monitor\Default_Monitor\0001,ConfigFlags,1,00,00,00,00
HKLM,Enum\Monitor\Default_Monitor\0001,DeviceDesc,,"miroTWINFACE"
HKLM,Enum\Monitor\Default_Monitor\0001,Driver,,"Monitor\0000"
HKLM,Enum\Monitor\Default_Monitor\0001,HardwareID,,"Monitor\MIR8520"
HKLM,Enum\Monitor\Default_Monitor\0001,Mfg,,"miro Computer Products AG"
HKLM,System\CurrentControlSet\Services\Class\Monitor\0000,DriverDesc,,"miroTWINFACE"
HKLM,System\CurrentControlSet\Services\Class\Monitor\0000,ICMProfile,1,9
HKLM,System\CurrentControlSet\Services\Class\Monitor\0000,InfPath,,"TWINMON.INF"
HKLM,System\CurrentControlSet\Services\Class\Monitor\0000,InfSection,,"TWIN.Install"
HKLM,System\CurrentControlSet\Services\Class\Monitor\0000,MaxResolution,,"3200,1280"
HKLM,System\CurrentControlSet\Services\Class\Monitor\0000,MinResolution,,"3200,1280"
HKLM,"System\CurrentControlSet\Services\Class\Monitor\0000\MODES\3200,1280",Mode1,,"29.0-85.0,50.0-160.0,+,+"
HKLM,Software\%miro%\miroTWINFACE,left_is,,"1"
HKLM,Software\%miro%\miroTWINFACE,TwinResolution,,"1280*480*8=640*480*8,640*480*8"
; #+#+# SKid-Ex:
;HKLM,Software\Microsoft\Windows\CurrentVersion\miroTEMP,miroINFCall,,"1" ; The values ignored (just it's presence is the signal !!
; #+#+# @@change
;HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,miroSETUP,,"%10%\miro\install\setup.exe"
HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,miroSETUP,,"%01%\setup.exe"
HKU,Default\InstallLocationsMRU,a,,"%10%\miro\install\"
; @@ST 18.11.96 used for the different Tools
HKLM,Software\%miro%,DisplayType,,"TWIN"
[MODESTwin.AddReg]
; all supported modes of the graphics driver
HKR,"MODES\8\1280,480",,,
HKR,"MODES\8\1440,600",,,
HKR,"MODES\8\1600,600",,,
HKR,"MODES\8\1664,768",,,
HKR,"MODES\8\1792,864",,,
HKR,"MODES\8\1824,768",,,
HKR,"MODES\8\1920,1024",,,
HKR,"MODES\8\1952,864",,,
HKR,"MODES\8\2048,768",,,
HKR,"MODES\8\2048,1024",,,
HKR,"MODES\8\2080,1024",,,
HKR,"MODES\8\2176,864",,,
HKR,"MODES\8\2208,1024",,,
HKR,"MODES\8\2240,1200",,,
HKR,"MODES\8\2240,1280",,,
HKR,"MODES\8\2304,864",,,
HKR,"MODES\8\2304,1024",,,
HKR,"MODES\8\2400,1200",,,
HKR,"MODES\8\2400,1280",,,
HKR,"MODES\8\2432,1024",,,
HKR,"MODES\8\2560,1024",,,
HKR,"MODES\8\2624,1200",,,
HKR,"MODES\8\2624,1280",,,
HKR,"MODES\8\2688,1024",,,
HKR,"MODES\8\2752,1200",,,
HKR,"MODES\8\2752,1280",,,
HKR,"MODES\8\2816,1024",,,
HKR,"MODES\8\2880,1200",,,
HKR,"MODES\8\2880,1280",,,
HKR,"MODES\8\3008,1200",,,
HKR,"MODES\8\3008,1280",,,
HKR,"MODES\8\3200,1200",,,
HKR,"MODES\8\3200,1280",,,
HKR,"MODES\16\1280,480",,,
HKR,"MODES\16\1440,600",,,
HKR,"MODES\16\1600,600",,,
HKR,"MODES\16\1664,768",,,
HKR,"MODES\16\1792,864",,,
HKR,"MODES\16\1824,768",,,
HKR,"MODES\16\1920,1024",,,
HKR,"MODES\16\1952,864",,,
HKR,"MODES\16\2048,768",,,
HKR,"MODES\16\2048,1024",,,
HKR,"MODES\16\2080,1024",,,
HKR,"MODES\16\2176,864",,,
HKR,"MODES\16\2208,1024",,,
HKR,"MODES\16\2240,1200",,,
HKR,"MODES\16\2240,1280",,,
HKR,"MODES\16\2304,864",,,
HKR,"MODES\16\2304,1024",,,
HKR,"MODES\16\2400,1200",,,
HKR,"MODES\16\2400,1280",,,
HKR,"MODES\16\2432,1024",,,
HKR,"MODES\16\2560,1024",,,
HKR,"MODES\16\2624,1200",,,
HKR,"MODES\16\2624,1280",,,
HKR,"MODES\16\2688,1024",,,
HKR,"MODES\16\2752,1200",,,
HKR,"MODES\16\2752,1280",,,
HKR,"MODES\16\2816,1024",,,
HKR,"MODES\16\2880,1200",,,
HKR,"MODES\16\2880,1280",,,
HKR,"MODES\16\3008,1200",,,
HKR,"MODES\16\3008,1280",,,
HKR,"MODES\16\3200,1200",,,
HKR,"MODES\16\3200,1280",,,
HKR,"MODES\32\1280,480",,,
HKR,"MODES\32\1440,600",,,
HKR,"MODES\32\1600,600",,,
HKR,"MODES\32\1664,768",,,
HKR,"MODES\32\1792,864",,,
HKR,"MODES\32\1824,768",,,
HKR,"MODES\32\1920,1024",,,
HKR,"MODES\32\1952,864",,,
HKR,"MODES\32\2048,768",,,
HKR,"MODES\32\2048,1024",,,
HKR,"MODES\32\2080,1024",,,
HKR,"MODES\32\2176,864",,,
HKR,"MODES\32\2208,1024",,,
HKR,"MODES\32\2240,1200",,,
HKR,"MODES\32\2240,1280",,,
HKR,"MODES\32\2304,864",,,
HKR,"MODES\32\2304,1024",,,
HKR,"MODES\32\2400,1200",,,
HKR,"MODES\32\2400,1280",,,
HKR,"MODES\32\2432,1024",,,
HKR,"MODES\32\2560,1024",,,
HKR,"MODES\32\2624,1200",,,
HKR,"MODES\32\2624,1280",,,
HKR,"MODES\32\2688,1024",,,
HKR,"MODES\32\2752,1200",,,
HKR,"MODES\32\2752,1280",,,
HKR,"MODES\32\2816,1024",,,
HKR,"MODES\32\2880,1200",,,
HKR,"MODES\32\2880,1280",,,
HKR,"MODES\32\3008,1200",,,
HKR,"MODES\32\3008,1280",,,
HKR,"MODES\32\3200,1200",,,
HKR,"MODES\32\3200,1280",,,
[Prop.AddReg]
HKCR,CLSID\{9f165560-62d9-11cf-9921-00aa0068f2bb},"",,"TwinfacePropSheet"
HKCR,CLSID\{9f165560-62d9-11cf-9921-00aa0068f2bb}\InprocServer32,"",,"%10%\miro\common\twinext.dll"
HKCR,CLSID\{9f165560-62d9-11cf-9921-00aa0068f2bb}\InprocServer32,ThreadingModel,,"Apartment"
HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion\Controls Folder\Display\shellex\PropertySheetHandlers","",,"ExtPage"
HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion\Controls Folder\Display\shellex\PropertySheetHandlers\Twinface CPL Extension","",,"{9f165560-62d9-11cf-9921-00aa0068f2bb}"
HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion\Shell Extensions\Approved","{9f165560-62d9-11cf-9921-00aa0068f2bb}",,"TwinfacePropSheet"
[ALLSingle.AddReg]
; Eintrge die fr alle Karten gleich sind
HKR,,ver,,4.0
HKR,,DevLoader,,*vdd
HKR,,MiroPath,,"%10%\miro"
HKR,DEFAULT,Mode,,"8,1024,768"
HKR,DEFAULT,drv,,miro.drv
HKR,DEFAULT,vdd,,"*vdd,*vflatd"
HKR,DEFAULT,minivdd,,miromini.vxd
HKR,DEFAULT,RefreshRate,,-1
HKR,DEFAULT,DDC,,"1"
; #+#+# @@change
;HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,miroSETUP,,"%10%\miro\install\setup.exe"
HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,miroSETUP,,"%01%\setup.exe"
HKU,Default\InstallLocationsMRU,a,,"%10%\miro\install\"
; @@ST 18.11.96 used for the different Tools
HKLM,Software\%miro%,DisplayType,,"SINGLE"
[MODESSingle.AddReg]
; all supported modes of the graphics driver
HKR,"MODES\4\1280,1024",,,
HKR,"MODES\8\640,480",,,
HKR,"MODES\8\704,480",,,
HKR,"MODES\8\704,576",,,
HKR,"MODES\8\768,576",,,
HKR,"MODES\8\800,600",,,
HKR,"MODES\8\1024,768",,,
HKR,"MODES\8\1152,864",,,
HKR,"MODES\8\1280,1024",,,
HKR,"MODES\8\1408,1024",,,
HKR,"MODES\8\1600,1200",,,
HKR,"MODES\8\1600,1280",,,
HKR,"MODES\16\640,480",,,
HKR,"MODES\16\704,480",,,
HKR,"MODES\16\704,576",,,
HKR,"MODES\16\768,576",,,
HKR,"MODES\16\800,600",,,
HKR,"MODES\16\1024,768",,,
HKR,"MODES\16\1152,864",,,
HKR,"MODES\16\1280,1024",,,
HKR,"MODES\16\1408,1024",,,
HKR,"MODES\16\1600,1200",,,
HKR,"MODES\16\1600,1280",,,
HKR,"MODES\32\640,480",,,
HKR,"MODES\32\704,480",,,
HKR,"MODES\32\704,576",,,
HKR,"MODES\32\768,576",,,
HKR,"MODES\32\800,600",,,
HKR,"MODES\32\1024,768",,,
HKR,"MODES\32\1152,864",,,
HKR,"MODES\32\1280,1024",,,
HKR,"MODES\32\1408,1024",,,
HKR,"MODES\32\1600,1200",,,
HKR,"MODES\32\1600,1280",,,
[miro]
; Mgliche PCI IDs fuer Miro S3 Grafikkarten
%MIROS3TWIN_PCI%= MIROS3Twin.Install, PCI\VEN_5333&DEV_88C0, PCI\VEN_5333&DEV_88C1, PCI\VEN_5333&DEV_88D0, PCI\VEN_5333&DEV_88D1, PCI\VEN_5333&DEV_8810, PCI\VEN_5333&DEV_8811, PCI\VEN_5333&DEV_8890, PCI\VEN_5333&DEV_88F0, PCI\VEN_5333&DEV_8880
%MIROS3SINGLE_PCI%= MIROS3Single.Install, PCI\VEN_5333&DEV_88C0, PCI\VEN_5333&DEV_88C1, PCI\VEN_5333&DEV_88D0, PCI\VEN_5333&DEV_88D1, PCI\VEN_5333&DEV_8810, PCI\VEN_5333&DEV_8811, PCI\VEN_5333&DEV_8890, PCI\VEN_5333&DEV_88F0, PCI\VEN_5333&DEV_8880
[MIROS3Twin.Install]
LogConfig=miro.LogConfig
DelReg=All.DelReg, Twin.DelReg
DelFiles=appsTwin.Delete
AddReg=ALLTwin.AddReg, MODESTwin.AddReg, Prop.AddReg
; #+#+# @@change
CopyFiles=miroTwin.Copy,INF.Copy,Timings.Copy,appsTwin.Copy, miroINST_Copy, miroINST_Copy_GER
;CopyFiles=miroTwin.Copy,Timings.Copy,appsTwin.Copy
UpdateInis=miro.inis
[MIROS3Single.Install]
LogConfig=miro.LogConfig
DelReg=All.DelReg
DelFiles=appsSingle.Delete
AddReg=ALLSingle.AddReg,MODESSingle.AddReg
; #+#+# @@change
CopyFiles=miroSingle.Copy,INF.Copy,Timings.Copy,appsSingle.Copy, miroINST_Copy, miroINST_Copy_GER
;CopyFiles=miroSingle.Copy,Timings.Copy,appsSingle.Copy
UpdateInis=miro.inis
[Strings]
ClassName="Display"
miro="miro Computer Products"
mirowin="miro·win; High-speed single/twin drivers for Windows 95"
MIROS3TWIN_PCI= "miro S3 Twin PCI"
MIROS3TWIN_VL = "miro S3 Twin VLB"
MIROS3SINGLE_PCI= "miro S3 Single PCI"
MIROS3SINGLE_VL = "miro S3 Single VLB"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.