Additional Information
MM AT3500 Version 1.01
This file contains additional information and changes about the
various software that was not available at printing time.
Aztech 2320 PnP Device Drivers Installation in Windows 95
=========================================================
Start the Windows 95 Operating System. Win95 will automatically detects
the Aztech 2320 PnP Sound Device and prompt for its respective drivers.
Please choose the option "Driver from disk provided by manufacturers".
Note : Especially, when Win95 detected the board as a "Creative Sound
Blaster Pro Device". It is important that you choose to load
the drivers from the disk supplied by the manufacturers; else,
the sound device of this board will not be functioning.
Insert the MM AT3500 Installation Disk #1 into Drive A: and click OK.
Change the search path to A: and Click OK to install the drivers.
Win95 will now proceed to copy the Aztech 2320 PnP Sound Device Drivers.
Win95 will prompt to restart the Windows after copying some of the drivers
and will continue the detection after system restart.
Note: if you do not have your Windows 95 Multimedia Applications installed
previously, system will prompt you to complete the installation of
the Multimedia Applications prior to the copying of the Audio Device
drivers. Just follow the instructions given onscreen to complete the
installation of Multimedia Application and Aztech 2320 PnP Sound
Devices.
Next, please proceed to run 'A:\SETUP.EXE' from the Multimedia AT3500
Installation Disk #1 to install the application software.
You might encounter some resources conflict after loading the (PnP)
devices (especially when there are non-Plug & Play adaptors installed in
your system). Please refer to Trouble-shooting section in Win95 for further
details.
MIC3D/MIC Option
================
If you have enabled the Mic Monitoring in DOS mode and noticed that there
is no sound from the speaker when you speak to the Mic, try adjusting the
Mic volume by using the MIX or VOLSET utility.
AT Commands
===========
For Standard AT Command Set, please refer to the document (ATCOMSET.DOC) in
the installed directory.
Installation on Windows 95 SR2 Platform
=======================================
This version of Windows 95 will prompt the user for the Installation Disk#1
into the Floppy drive. After the installation disk has been inserted, click
NEXT and follow through the on-screen instructions to complete the
installation of Multimedia Application and PnP Sound Drivers.
Next, proceed to run 'A:\SETUP.EXE' from the PnP Audio Installation Disk #1
to install the application software.
Installation of Windows 95 with a Telephony card onboard
========================================================
If the above situation is encountered, just type A:\SETUP.EXE from the PnP
Installation Disk #1 and all the required drivers will be automatically
installed. Note that in this particular case, the File Transfer application
will not be installed. However, in that of the Windows 95 OSR2 platform,
the File Transfer will be installed.
Updated Windows 95 Audio Drivers
================================
The updated windows95 drivers now support Full Duplex Operation, Windows
Direct-X Sound, SingleModeDma operation. They also include enhancements in
Window's mixer controls and power management.
To upgrade to these drivers, double click on the "Win95 Driver Upgrade"
icon in the newly created program group after having restarted the Windows
upon completion of the installation.
Note : These new drivers have not passed Microsoft Windows Hardware
Quality Labs. (WHQL) logo testing.
Cards with 3D function
======================
If your card has 3D function, after installing SETUP or restarting from
Windows, you can activate the 3D function by clicking on the '3D' button
which is located on the audio mixer.
For Windows 3.x, the mixer can be found in the program group formed after
installation.
For Windows 95, the mixer can be found under the group name formed after
installation. This is in turn located under 'Programs' in the 'Start'
menu. The '3D' function can also be activated through the Microsoft
Volume Control Panel. This can be done by clicking on the default
Microsoft 'Speaker' icon located at the bottom right corner of the
screen. Choose 'Options' and then 'Advanced Controls' from menu. Click
on the 'Advanced' button and the 3D sound effects can be chosen.
***********************************************************
* In case you encounter any problem with our products, *
* please quote the following model(s) when calling our *
* Technical Support : *
* MM AT3500 (USA) Telephony Card *
***********************************************************
------- The End ---------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.