1. LG10_100_tp.zip Driver
2. pcnfs.txt File Contents

pcnfs.txt Driver File Contents (LG10_100_tp.zip)

               PRO120 100/10 Mbps PCI Bus Fast Ethernet Adapters 
                               NDIS2 MAC Driver 
                      for SUN PC-NFS Installation Guide
               =================================================


The driver named MXNICF contained in the directory \NDIS20\DOS conforms to the
Network Driver Interface Specification (NDIS) defined by Microsoft/3Com.


NDIS Driver Installation on SUN PC-NFS
======================================

 1. Edit the CONFIG.SYS file to include the following command line, and reboot
    the PC:

     Device=c:\dos\ansi.sys

 2. Insert the PC-NFS Installation diskette into the PC's floppy drive. Type
    the following from DOS and press <Enter> to bring up the PC-NFS
    installation screen:

     INSTALL <Enter>

 3. Follow screen prompts to configure your screen display. For example, press
    <M> to choose mono display, or press <C> to choose color display, or press
    <ESC> to cancel the installation.

 4. When the "Install the Basic PC-NFS files" window appears on screen, select
    "Install Full PC-NFS" from the choice list.

 5. Specify the target PC-NFS installation directory by typing the appropriate 
    path in the field provided. For example, C:\NFS. Press <Enter> to continue.

 6. Carefully read and respond to each prompt that appears on screen,
    indicating the suitable selections for your system.

 7. When you reach the prompt that reads, "Configure an Ethernet network 
    connection," choose "Ethernet" from the choice list. Then press <Enter> to
    confirm your choice.

 8. Choose the network adapter you will use. Select "NDIS" from the list shown
    on screen. Then press <Enter> to confirm your choice.
 
 9. Follow screen instructions to complete the process. You will be prompted to
    insert some PC-NFS distribution diskettes. During the process, files from
    the diskettes will be copied into your hard disk drive.

10. When prompted to update your AUTOEXEC.BAT and CONFIG.SYS files, press "Y."

11. Your system will prompt you when the installation process is complete. It
    will display the following message:

     "PC-NFS installation is complete"

12. The system will create two subdirectories in the destination drive, namely,
    \LANMAN and \NFS.

13. Create the NETWORK.BAT, DRIVES,BAT and HOSTS files. Specify the PC name, IP
    address, server name and server IP address in these files.  See the section
    on Sample Configuration Files for examples.

14. Copy the NETWORK.BAT, DRIVES.BAT and HOSTS files into the \NFS directory of
    your server.

15. Copy the MXNICF.DOS file from the \MSLANMAN.DOS\DRIVERS\ETHERNET of your
    Driver Diskette to the newly created subdirectory (\LANMAN) on your
    destination drive.

    Note: The MXNICF.DOS file is also found in the \NDIS20\DOS
          directory of your Driver Diskette.
	  Rename protocol.nfs file in \lanman directory to a new
	  file name called protocol.ini.	  
	
16. Edit the CONFIG.SYS file using a text editor. Add the following command 
    line before the NFS_NDIS driver specification:

     DEVICE=C:\LANMAN\MXNICF.DOS

17. Edit the PROTOCOL.INI file in the \LANMAN directory, replacing the
    following:

    a. Replace the section name [your-mac-module] with [MXNICF]
    b. Replace the command line "drivername = YOURMAC$" with
       "drivername = MXNICF$"
    c. Replace the command line "bindings = YOUR-MAC-MODULE" with
       "bindings = MXNICF$"
    d. Assign the media type and line speed as used in sample PROTOCOL.INI file.

18. Reboot your computer. Then start the application you need. For example:

    a. Execute NFSCONF.EXE to configure the system, such as mounting a virtual 
       drive E:
    b. Execute TELNET.EXE to do terminal emulation


Sample Configuration Files
==========================

 1. NETWORK.BAT

    REM stc* is a sample PC-NFS workstation name
    REM sun_srv is a sample PC-NFS server address
    NET START RDR stc*
    NET PCNFSD sun_srv
    NET NAME stc*

 2. DRIVES.BAT

    REM specify connections to remote directory
    NET USE l:sun_srv:/usr2/down
    NET USE k:sun_srv:/mnt 

 3. HOSTS

    REM specify gateway address
    192.72.54.100 <gateway # updated>

    REM specify workstation's IP address
    192.72.54.101 stc

    REM specify server's IP address
    192.72.54.102 sun_srv

 4. CONFIG.SYS

    Shell=C:\command.com /P /E:526
    Dos=High, UMB
    rem ---- PCNFS install ----
    DEVICE=C:\DOS\ANSI.SYS
    DEVICE=C:\NFS\PCNFS.SYS  /m
    DEVICE=C:\NFS\SOCKDRV.SYS
    REM Specify PROTOCOL.INI directory
    DEVICE=C:\LANMAN\PROTMAN.SYS /i:C:\LANMAN
    REM MX98713 NDIS driver name
    DEVICE=C:\LANMAN\MXNICF.DOS
    DEVICE=C:\LANMAN\NFS-NDIS.SYS
    FILES=50
    BUFFERS=50
    LASTDRIVE=V
    STACKS=9,256 

 5. PROTOCOL.INI file at the \LANMAN directory

    [Protocol Manager]
      DriverName = PROTMAN$

    [MXNICF]
    ; PROTOCOL.INI for the PCI Fast Ethernet Adapters
      DriverName = MXNICF$
    ;; Range: 0-7.
    ;; Usage: "Board=nn"
    ;------------------
    ;   Board = 0
    ;
    ;; Options: NWAY, TX10, TX10FD, TX100, TX100FD.
    ;; FD -> Full Duplex
    ;; Usage: "MEDIA_TYPE=xxxxx"
    ;-------------------------
    MEDIA_TYPE = "NWAY" (default value)
    ;
    ; End of this sample file 

    [NFS-NDIS]
      drivername = NFSLINK1
      bindings = MXNICF

 6. AUTOEXEC.BAT
    ...
    SET TZ=PST8
    SET PATH=C:\;C:\NFS;C:\LANMAN
    SET NFSDRIVE=D
    REM Add the following line to bind NDIS driver
    C:\LANMAN\NETBIND
    PRT *
    REM Execute application you need, e.g. NFSRUN
    NFSRUN