[version]
LayoutFile=layout.inf
signature ="$CHICAGO$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%MS%
DriverVer=11/14/1999,5.00.2183.1
[DestinationDirs]
DefaultDestDir = 11
ComPort.NT.Copy = 12
SerialEnumerator.NT.Copy = 12
NonPort.NT.Copy = 12
; -------------- USB serial port Installation Section For U111
UsbComPort.NT.CopyFiles = 12;DIRID_DRIVERS
; Install Class Ports
;----------------------------------------------------------
[ClassInstall]
AddReg=PortsClass.AddReg
[PortsClass.AddReg]
HKR,,,,%PortsClassName%
[ClassInstall32.NT]
AddReg=PortsClass.NT.AddReg
[PortsClass.NT.AddReg]
HKR,,,,%PortsClassName%
HKR,,Icon,,"-23"
HKR,,Installer32,,"MsPorts.Dll,PortsClassInstaller"
;Drivers
;----------------------------------------------------------
[Manufacturer]
%Std%=Std
%Manu%=Manu
[Std]
%PNP0500.DeviceDesc% = ComPort, *PNP0500, *PNP0501
%PNP0501.DeviceDesc% = ComPort, *PNP0501, *PNP0500
%PNP0502.DeviceDesc% = MultiComPort, *PNP0502
[Manu]
%Manu.DeviceDesc% = ComPort, "PCMCIA\Hermos_Informatik_GmbH-PC-Card:Transponder_Reader-5ACD", "PCMCIA\Hermos_Informatik_GmbH-PC-Card:Transponder_Reader-015D-4C45"
; -------------- USB serial port Installation Section For U111
%Manu.DeviceDesc% = UsbComPort, "USB\Vid_02fb&Pid_5acd"
; COM sections
;----------------------------------------------------------
[ComPort]
CopyFiles=ComPort.Copy
AddReg=ComPort.AddReg,ComPort.W95.AddReg
LogConfig=c14,c1a,c23,c2a,c34,c3a,c43,c4a,caa
[ComPort.Copy]
serial.vxd
serialui.dll
[ComPort.AddReg]
HKR,,PortSubClass,1,01
[ComPort.W95.AddReg]
HKR,,DevLoader,,*vcomm
HKR,,Enumerator,,serenum.vxd
HKR,,PortDriver,,serial.vxd
HKR,,Contention,,*vcd
HKR,,ConfigDialog,,serialui.dll
HKR,,DCB,3,1C,00,00,00, 80,25,00,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00
HKR,,EnumPropPages,,"serialui.dll,EnumPropPages"
[ComPort.NT]
CopyFiles = ComPort.NT.Copy
AddReg=ComPort.AddReg, ComPort.NT.AddReg
LogConfig=c14,c1a,c23,c2a,c34,c3a,c43,c4a,caa
SyssetupPnPFlags = 1
[ComPort.NT.HW]
AddReg = ComPort.NT.HW.AddReg
[ComPort.NT.Copy]
serial.sys
serenum.sys
[ComPort.NT.AddReg]
HKR , , EnumPropPages32, , "MsPorts.dll,SerialPortPropPageProvider"
; Uncomment the following line if you want to override the advanced dialog for
; your device. See msports.h for protoype of OverrideAdvancedFunction
; HKR,,EnumAdvancedDialog,,'yourdll.dll,OverrideAdvancedFunction'
[ComPort.NT.HW.AddReg]
HKR , ,"UpperFilters",0x00010000,"serenum"
; MultiPort COM Sections;
; -------------------------------------------------------
[MultiComPort.NT]
CopyFiles = ComPort.NT.Copy
AddReg=ComPort.AddReg, ComPort.NT.AddReg
LogConfig=cm1,cm2,cm3,cm4,dg1,dga,cma
SyssetupPnPFlags = 1
[MultiComPort.NT.HW]
; Add multiport and normal port into the hardware devnode
AddReg=MultiComPort.NT.HW.AddReg,ComPort.NT.HW.AddReg
[MultiComPort.NT.HW.AddReg]
; Add multiport specific info to the hardware devnode
HKR,,MultiportDevice,0x00010001,1
; The serial enumerator by itself, so that other INFs can install serenum w/out serial.sys
; -------------------------------------------------------
[SerialEnumerator.NT]
CopyFiles = SerialEnumerator.NT.Copy
[SerialEnumerator.NT.Copy]
Serenum.sys
;-------------- Service installation
; Port Driver (function driver for this device)
[ComPort.NT.Services]
AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst
AddService = Serenum,,Serenum_Service_Inst
[MultiComPort.NT.Services]
AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst
AddService = Serenum,,Serenum_Service_Inst
[SerialEnumerator.NT.Services]
AddService = Serenum,,Serenum_Service_Inst
; -------------- Serial Port Driver install sections
[Serial_Service_Inst]
DisplayName = %Serial.SVCDESC%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 1 ; SERVICE_SYSTEM_START (this driver may do detection)
ErrorControl = 0 ; SERVICE_ERROR_IGNORE
ServiceBinary = %12%\serial.sys
LoadOrderGroup = Extended base
; -------------- Serenum Driver install section
[Serenum_Service_Inst]
DisplayName = %Serenum.SVCDESC%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\serenum.sys
LoadOrderGroup = PNP Filter
[Serial_EventLog_Inst]
AddReg = Serial_EventLog_AddReg
[Serial_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\\System32\drivers\serial.sys"
HKR,,TypesSupported,0x00010001,7
[*pnp0500.det]
AddReg=Ports.AddReg,DevMap.AddReg
; The following sections are COM port resource configs.
; Section name format means:
; Char 1 = c (COM port)
; Char 2 = I/O config: 1 (3f8), 2 (2f8), 3 (3e8), 4 (2e8), a (any)
; Char 3 = IRQ config: #, a (any)
[c14] ; COM1,IRQ4
ConfigPriority=HARDRECONFIG
IOConfig=3f8-3ff(3ff::)
IRQConfig=S:4
[c1a] ; COM1, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=3f8-3ff(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15
[c23] ; COM2, IRQ3
ConfigPriority=HARDRECONFIG
IOConfig=2f8-2ff(3ff::)
IRQConfig=S:3
[c2a] ; COM2, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=2f8-2ff(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15
[c34] ; COM3, IRQ4
ConfigPriority=HARDRECONFIG
IOConfig=3e8-3ef(3ff::)
IRQConfig=S:4
[c3a] ; COM3, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=3e8-3ef(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15
[c43] ; COM4, IRQ3
ConfigPriority=HARDRECONFIG
IOConfig=2e8-2ef(3ff::)
IRQConfig=S:3,5
[c4a] ; COM4, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=2e8-2ef(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15
[caa] ; Any base, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=8@100-ffff%fff8(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15
; The following are multiport configs for DigiBoard (dgxx)
; and Comtrol (cmxx) multiport boards
; Section name format means:
; Char 1,2 = manufacturer abbreviation
; Char 3 = config number, a = no idea, use base setting
[cm1]
ConfigPriority = HARDRECONFIG
IOConfig=7@240-27E%3F8(3FF::)
IOConfig=247-247(3FF::)
IRQConfig=S:2,3,4,5,7,10,11
[cm2]
ConfigPriority = HARDRECONFIG
IOConfig=7@280-2BE%3F8(3FF::)
IOConfig=287-287(3FF::)
IRQConfig=S:2,3,4,5,7,10,11
[cm3]
ConfigPriority = HARDRECONFIG
IOConfig=7@500-5BE%FF8(3FF::)
IOConfig=507-507(FFF::)
IRQConfig=S:2,3,4,5,7,10,11
[cm4]
ConfigPriority = HARDRECONFIG
IOConfig=7@580-5BE%FF8(3FF::)
IOConfig=587-587(3FF::)
IRQConfig=S:2,3,4,5,7,10,11
[cma]
ConfigPriority = HARDRECONFIG
IOConfig=7@100-3FF%3F8(3FF::) ; I suspect we still need alignment here?
IOConfig=1@100-3FF(3FF::) ; How about here?
IRQConfig=S:2,3,4,5,7,10,11
[dg1]
ConfigPriority = HARDRECONFIG
IOConfig=7@100-17E%3F8(3FF::)
IOConfig=140-140(3FF::)
IRQConfig=S:3,4,5,6,7,9,10,11,12,14,15
[dga]
ConfigPriority = HARDRECONFIG
IOConfig=7@100-3FF%3F8(3FF::) ; I suspect we still need alignment here?
IOConfig=1@100-3FF(3FF::) ; How about here?
IRQConfig=S:3,4,5,6,7,9,10,11,12,14,15
; End COM port LogConfig sections
[ComPort.PosDup]
*PNP0500,*PNP0501,*PNP0502
[ComPort.NT.PosDup]
*PNP0500,*PNP0501,*PNP0502
[DevMap.AddReg]
HKLM,hardware\devicemap\serialcomm,COM1,,COM1
HKLM,hardware\devicemap\serialcomm,COM2,,COM2
; 'NoDrv' section: We do not yet support these port devices.
;----------------------------------------------------------
[NoDrv]
; 'Non-port' sections: PCMCIA cards that look like COM
; ports, but aren't (excluding modems).
;----------------------------------------------------------
[NonPort]
CopyFiles = NonPort.Copy
AddReg = NonPort.AddReg
[NonPort.Copy]
serial.vxd
[NonPort.AddReg]
HKR , , PortSubClass, 1, 1
HKR,,DevLoader,,*vcomm
HKR , , PortDriver, , serial.vxd
HKR,,Contention,,*vcd
HKR,,DCB,3,1C,00,00,00, 80,25,00,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00
[NonPort.NT]
;
; BUGBUG--Unclear whether these devices are presently supported under NT. For now, leave a blank
; install section so we won't run the Win9x stuff. The fact that no function driver will be installed
; for this devnode will cause the installation to fail, which is what we want to have happen for now.
[Det.DevINFs]
*pnp8215=netxir.inf ;Xircom PE3
*pnpa01e=scsi.inf ;Trantor T338
*pnpa01f=scsi.inf ;Trantor T348
*pnpa02f=scsi.inf ;Trantor T358
; User readable strings
;----------------------------------------------------------
[Strings]
PortsClassName="Ports (COM & LPT)"
Manu="Hermos Informatik GmbH"
Manu.DeviceDesc="PC-Card:Transponder Reader"
MS="Microsoft"
Std="(Standard port types)"
*PNNP500.DeviceDesc = "Communications Port"
*PNNP501.DeviceDesc = "Communications Port"
*PNNP502.DeviceDesc = "Multiport Communications Port"
Serial.SVCDESC = "Serial Port Driver"
Serenum.SVCDESC = "Serenum Filter Driver"
; -------------- USB serial port Installation Section For U111
Usbser.SVCDESC = "USB Serial Driver"
; -------------- USB serial port Installation Section For U111
[UsbComPort]
CopyFiles=ComPort.Copy
AddReg=ComPort.AddReg
[UsbComPort.NT]
CopyFiles=ComPort.NT.Copy, UsbComPort.NT.CopyFiles
AddReg=ComPort.AddReg, ComPort.NT.AddReg, UsbComPort.NT.AddReg
SyssetupPnPFlags = 1
[UsbComPort.NT.AddReg]
HKLM,"System\CurrentControlSet\Services\elUsbPCCard\Parameters", DisableHardwareFlowControlOnPort, 0x00010001, 1
[UsbComPort.NT.Services]
AddService=usbser, 0x00000002, UsbSer_Service_Inst
[UsbSer_Service_Inst]
DisplayName =%Usbser.SVCDESC%
ServiceType = 1
StartType = 3
ErrorControl = 0
ServiceBinary = %12%\usbser.sys
[UsbComPort.NT.CopyFiles]
usbser.sys,,,0x20
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.