1. elan.zip Driver
2. cfc-reader_hf.inf File Contents

cfc-reader_hf.inf Driver File Contents (elan.zip)

;--------------------comment text start-----------------------

;YOU MUST delete this comment text before fielding this INF
;file with your product....

;WARNING the crc value in this file is not computed and must be
;patched. To get the crc remove the newly written VPU PC-Card
;and re-insert. A new hardware message will be displayed. Do
;not clear this window. Go to the Windows Registry (run regedit
;from the start menu).  Under HKEY_LOCAL_MACHINE\enum\PCMCIA\
;find the card manufacturer and description strings that match
;your card setting. After these strings is a four byte checksum.
;Note the value. Copy it replacing the checksum placeholder of
;0000 in the section 'Drivers' [Manu] found below.

;---------------------comment text end------------------------

;______________________________________________________________
;
;Elan Digital Systems Ltd :INF creation using VPUCIS Utility
;Windows 9x/2000/XP Installation file for VPU PC-Cards
;$Modified: KW$ $Revision: 1.0$  $Date: 2001/12/07
;Derrived from Microsoft's msports.inf
;______________________________________________________________

[version]
LayoutFile=layout.inf
signature ="$CHICAGO$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%MS%
DriverVer=11/14/1999,5.00.2183.1

[DestinationDirs]
DefaultDestDir  = 11
ComPort.NT.Copy = 12
SerialEnumerator.NT.Copy = 12
NonPort.NT.Copy = 12
; -------------- USB serial port Installation Section For U111
UsbComPort.NT.CopyFiles = 12;DIRID_DRIVERS

; Install Class Ports
;----------------------------------------------------------
[ClassInstall]
AddReg=PortsClass.AddReg

[PortsClass.AddReg]
HKR,,,,%PortsClassName%

[ClassInstall32.NT]
AddReg=PortsClass.NT.AddReg

[PortsClass.NT.AddReg]
HKR,,,,%PortsClassName%
HKR,,Icon,,"-23"
HKR,,Installer32,,"MsPorts.Dll,PortsClassInstaller"

;Drivers
;----------------------------------------------------------
[Manufacturer]
%Std%=Std
%Manu%=Manu

[Std]
%PNP0500.DeviceDesc% = ComPort, *PNP0500, *PNP0501
%PNP0501.DeviceDesc% = ComPort, *PNP0501, *PNP0500
%PNP0502.DeviceDesc% = MultiComPort, *PNP0502

[Manu]
%Manu.DeviceDesc% = ComPort, "PCMCIA\BROOKS_AUTOMATION_(GERMANY)_GMBH-CF-CARD:TRANSPONDER_READER-0000", "PCMCIA\BROOKS_AUTOMATION_(GERMANY)_GMBH-CF-CARD:TRANSPONDER_READER-01FB-5244"
; -------------- USB serial port Installation Section For U111
%Manu.DeviceDesc% = UsbComPort, "USB\Vid_02fb&Pid_f6ee"

; COM sections
;----------------------------------------------------------

[ComPort]
CopyFiles=ComPort.Copy
AddReg=ComPort.AddReg,ComPort.W95.AddReg
LogConfig=c14,c1a,c23,c2a,c34,c3a,c43,c4a,caa

[ComPort.Copy]
serial.vxd
serialui.dll

[ComPort.AddReg]
HKR,,PortSubClass,1,01

[ComPort.W95.AddReg]
HKR,,DevLoader,,*vcomm
HKR,,Enumerator,,serenum.vxd
HKR,,PortDriver,,serial.vxd
HKR,,Contention,,*vcd
HKR,,ConfigDialog,,serialui.dll
HKR,,DCB,3,1C,00,00,00, 80,25,00,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00
HKR,,EnumPropPages,,"serialui.dll,EnumPropPages"
[ComPort.NT]
CopyFiles = ComPort.NT.Copy
AddReg=ComPort.AddReg, ComPort.NT.AddReg
LogConfig=c14,c1a,c23,c2a,c34,c3a,c43,c4a,caa
SyssetupPnPFlags = 1

[ComPort.NT.HW]
AddReg = ComPort.NT.HW.AddReg

[ComPort.NT.Copy]
serial.sys
serenum.sys

[ComPort.NT.AddReg]
HKR , , EnumPropPages32, , "MsPorts.dll,SerialPortPropPageProvider"

; Uncomment the following line if you want to override the advanced dialog for
; your device.  See msports.h for protoype of OverrideAdvancedFunction
; HKR,,EnumAdvancedDialog,,'yourdll.dll,OverrideAdvancedFunction'

[ComPort.NT.HW.AddReg]
HKR , ,"UpperFilters",0x00010000,"serenum"

; MultiPort COM Sections;
; -------------------------------------------------------

[MultiComPort.NT]
CopyFiles = ComPort.NT.Copy
AddReg=ComPort.AddReg, ComPort.NT.AddReg
LogConfig=cm1,cm2,cm3,cm4,dg1,dga,cma
SyssetupPnPFlags = 1

[MultiComPort.NT.HW]
; Add multiport and normal port into the hardware devnode
AddReg=MultiComPort.NT.HW.AddReg,ComPort.NT.HW.AddReg

[MultiComPort.NT.HW.AddReg]
; Add multiport specific info to the hardware devnode
HKR,,MultiportDevice,0x00010001,1

; The serial enumerator by itself, so that other INFs can install serenum w/out serial.sys
; -------------------------------------------------------

[SerialEnumerator.NT]
CopyFiles = SerialEnumerator.NT.Copy

[SerialEnumerator.NT.Copy]
Serenum.sys

;-------------- Service installation
; Port Driver (function driver for this device)
[ComPort.NT.Services]
AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst
AddService = Serenum,,Serenum_Service_Inst

[MultiComPort.NT.Services]
AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst
AddService = Serenum,,Serenum_Service_Inst

[SerialEnumerator.NT.Services]
AddService = Serenum,,Serenum_Service_Inst

; -------------- Serial Port Driver install sections
[Serial_Service_Inst]
DisplayName    = %Serial.SVCDESC%
ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
StartType      = 1               ; SERVICE_SYSTEM_START (this driver may do detection)
ErrorControl   = 0               ; SERVICE_ERROR_IGNORE
ServiceBinary  = %12%\serial.sys
LoadOrderGroup = Extended base

; -------------- Serenum Driver install section
[Serenum_Service_Inst]
DisplayName    = %Serenum.SVCDESC%
ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
StartType      = 3               ; SERVICE_DEMAND_START
ErrorControl   = 1               ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\serenum.sys
LoadOrderGroup = PNP Filter

[Serial_EventLog_Inst]
AddReg = Serial_EventLog_AddReg

[Serial_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\\System32\drivers\serial.sys"
HKR,,TypesSupported,0x00010001,7

[*pnp0500.det]
AddReg=Ports.AddReg,DevMap.AddReg

; The following sections are COM port resource configs.
; Section name format means:
; Char 1 = c (COM port)
; Char 2 = I/O config: 1 (3f8), 2 (2f8), 3 (3e8), 4 (2e8), a (any)
; Char 3 = IRQ config: #, a (any)

[c14]           ; COM1,IRQ4
ConfigPriority=HARDRECONFIG
IOConfig=3f8-3ff(3ff::)
IRQConfig=S:4

[c1a]           ; COM1, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=3f8-3ff(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15

[c23]           ; COM2, IRQ3
ConfigPriority=HARDRECONFIG
IOConfig=2f8-2ff(3ff::)
IRQConfig=S:3

[c2a]           ; COM2, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=2f8-2ff(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15

[c34]           ; COM3, IRQ4
ConfigPriority=HARDRECONFIG
IOConfig=3e8-3ef(3ff::)
IRQConfig=S:4

[c3a]           ; COM3, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=3e8-3ef(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15

[c43]           ; COM4, IRQ3
ConfigPriority=HARDRECONFIG
IOConfig=2e8-2ef(3ff::)
IRQConfig=S:3,5

[c4a]           ; COM4, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=2e8-2ef(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15

[caa]           ; Any base, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=8@100-ffff%fff8(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15

; The following are multiport configs for DigiBoard (dgxx)
; and Comtrol (cmxx) multiport boards
; Section name format means:
; Char 1,2 = manufacturer abbreviation
; Char 3   = config number, a = no idea, use base setting

[cm1]
ConfigPriority = HARDRECONFIG
IOConfig=7@240-27E%3F8(3FF::)
IOConfig=247-247(3FF::)
IRQConfig=S:2,3,4,5,7,10,11

[cm2]
ConfigPriority = HARDRECONFIG
IOConfig=7@280-2BE%3F8(3FF::)
IOConfig=287-287(3FF::)
IRQConfig=S:2,3,4,5,7,10,11

[cm3]
ConfigPriority = HARDRECONFIG
IOConfig=7@500-5BE%FF8(3FF::)
IOConfig=507-507(FFF::)
IRQConfig=S:2,3,4,5,7,10,11

[cm4]
ConfigPriority = HARDRECONFIG
IOConfig=7@580-5BE%FF8(3FF::)
IOConfig=587-587(3FF::)
IRQConfig=S:2,3,4,5,7,10,11

[cma]
ConfigPriority = HARDRECONFIG
IOConfig=7@100-3FF%3F8(3FF::) ; I suspect we still need alignment here?
IOConfig=1@100-3FF(3FF::)     ; How about here?
IRQConfig=S:2,3,4,5,7,10,11

[dg1]
ConfigPriority = HARDRECONFIG
IOConfig=7@100-17E%3F8(3FF::)
IOConfig=140-140(3FF::)
IRQConfig=S:3,4,5,6,7,9,10,11,12,14,15

[dga]
ConfigPriority = HARDRECONFIG
IOConfig=7@100-3FF%3F8(3FF::) ; I suspect we still need alignment here?
IOConfig=1@100-3FF(3FF::)     ; How about here?
IRQConfig=S:3,4,5,6,7,9,10,11,12,14,15

; End COM port LogConfig sections

[ComPort.PosDup]
*PNP0500,*PNP0501,*PNP0502

[ComPort.NT.PosDup]
*PNP0500,*PNP0501,*PNP0502

[DevMap.AddReg]
HKLM,hardware\devicemap\serialcomm,COM1,,COM1
HKLM,hardware\devicemap\serialcomm,COM2,,COM2

; 'NoDrv' section: We do not yet support these port devices.
;----------------------------------------------------------
[NoDrv]
; 'Non-port' sections: PCMCIA cards that look like COM
; ports, but aren't (excluding modems).
;----------------------------------------------------------
[NonPort]
CopyFiles = NonPort.Copy
AddReg = NonPort.AddReg

[NonPort.Copy]
serial.vxd 

[NonPort.AddReg]
HKR , , PortSubClass, 1, 1
HKR,,DevLoader,,*vcomm
HKR , , PortDriver, , serial.vxd
HKR,,Contention,,*vcd
HKR,,DCB,3,1C,00,00,00, 80,25,00,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00

[NonPort.NT]
;
; BUGBUG--Unclear whether these devices are presently supported under NT.  For now, leave a blank
; install section so we won't run the Win9x stuff.  The fact that no function driver will be installed
; for this devnode will cause the installation to fail, which is what we want to have happen for now.

[Det.DevINFs]
*pnp8215=netxir.inf     ;Xircom PE3
*pnpa01e=scsi.inf       ;Trantor T338
*pnpa01f=scsi.inf       ;Trantor T348
*pnpa02f=scsi.inf       ;Trantor T358

; User readable strings
;----------------------------------------------------------
[Strings]
PortsClassName="Ports (COM & LPT)"
Manu="Brooks Automation (Germany) GmbH"
Manu.DeviceDesc="CF-CARD:Transponder Reader"
MS="Microsoft"
Std="(Standard port types)"
*PNNP500.DeviceDesc = "Communications Port"
*PNNP501.DeviceDesc = "Communications Port"
*PNNP502.DeviceDesc = "Multiport Communications Port"
Serial.SVCDESC = "Serial Port Driver"
Serenum.SVCDESC = "Serenum Filter Driver"

; -------------- USB serial port Installation Section For U111
Usbser.SVCDESC = "USB Serial Driver"

; -------------- USB serial port Installation Section For U111
[UsbComPort]
CopyFiles=ComPort.Copy
AddReg=ComPort.AddReg

[UsbComPort.NT]
CopyFiles=ComPort.NT.Copy, UsbComPort.NT.CopyFiles
AddReg=ComPort.AddReg, ComPort.NT.AddReg, UsbComPort.NT.AddReg
SyssetupPnPFlags = 1

[UsbComPort.NT.AddReg]
HKLM,"System\CurrentControlSet\Services\elUsbPCCard\Parameters", DisableHardwareFlowControlOnPort, 0x00010001, 1

[UsbComPort.NT.Services]
AddService=usbser, 0x00000002, UsbSer_Service_Inst

[UsbSer_Service_Inst]
DisplayName	=%Usbser.SVCDESC%
ServiceType	= 1
StartType  	= 3
ErrorControl 	= 0
ServiceBinary 	= %12%\usbser.sys

[UsbComPort.NT.CopyFiles]
usbser.sys,,,0x20