*****************************************************************************
* *
* Microsoft Windows NT Installation *
* for PCMCIA Fast Ethernet Card *
* *
*****************************************************************************
This document contains the installation guide for the Microsoft
Windows NT Operating System.
It is recommented to print the instruction out on a printer before
installation. For the best results, open this document in Windows
Write, Microsoft Word, or another word processing application, select
the entire document and format the text in 10 point Courier before
printing.
Windows NT Version 4.0
=======================================
1. Open the Control Panel, and choose Network Setup.
2. When the Network window appears, click on the
Adapters tab. Click on the Add button, followed by
Have Disk. Put the driver disk into drive A.
When asked to supply the path to the disk, type a:\
and click OK.
NT will ask you to supply the I/O Base,
Interrupt, and Memory values for the card.
Good values to start with are 300 (for the
I/O Base) and 5 (for the IRQ).
3. When you're finished, click OK. NT will copy
necessary files to your computer.
4. When the Network window reappears, click on the
Bindings tab. Choose your bindings. Click on the
Protocols tab and select your settings. Do the same
for the Services tab.
5. After your bindings, settings, and services are set,
click on the Close button. Choose to restart your
computer. After NT restarts, be sure to log in.
Windows NT Version 3.51
=======================================
1. Open the Control Panel, and choose Network Setup.
2. Click the Add Adapter button.
3. Select "<Other> Requires disk from manufacturer".
4. Insert Driver Diskette in Drive A: and type A:\ in the path.
5. Select "PCMCIA Fast Ethernet Adapter" from the list.
6. Set the IRQ level, I/O Port and Memory Base Address to the desired
settings from the lists of free resources available. And click OK.
8. Click OK to exit Network Setup.
9. Insert the PCMCIA Fast Ethernet Card and Reboot Windows NT.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.