Banyan VINES R5.52 ------------------ PCMCIA Card's NDIS 2.01 driver may be configured to run in the Banyan VINES environment (for client-based systems only). Follow the steps listed below: 1 On your local hard drive to create a subdirectory. >>> For example C:\BANYAN Copy the installation relative files to this subdirectory. Note: The relative files are list as "File required" session of this text file. 2 Create the "PROTOCOL.INI", "CONFIG.SYS", and "AUTOEXEC.BAT" files (sample files are shown below). * Modify the "PROTOCOL.INI" file to reflect the changes necessary for the appropriate LAN card section. * Modify the "AUTOEXEC.BAT" and "CONFIG.SYS" files to reflect changes. 3 Run the VINES PCCONFIG Utility to configure the NDIS driver 4 Reboot the machine and run the "AUTOEXEC.BAT" file. 5 Run BAN. The installation of the NDIS 2.01 driver for Banyan VINES is now complete. Files Required -------------- BAN.EXE 32835 02-12-92 6:07p BAN.MSB 2058 02-12-92 6:07p REDIR.MSB 982 02-12-92 6:07p NEWREV.EXE 47933 02-12-92 6:07p NEWREV.MSB 5139 02-12-92 6:07p PCCONFIG.DB 19656 02-12-92 6:07p REDIRALL.EXE 51546 02-12-92 6:07p PCCONFIG.EXE 61155 02-12-92 6:07p PCCONFIG.MSB 5785 02-12-92 6:07p NDISBAN.COM 35356 02-12-92 6:07p NETBIND.EXE 15639 02-12-92 6:07p NDISBAN.DOC 3072 02-12-92 6:07p NDISBAN.OVL 15639 02-12-92 6:07p PROTMAN.DOS 10649 02-12-92 6:07p User Must Find -------------- EZNDIS.DOS The following path should be used to access the driver from the PCMCIA Ethernet Card's driver diskette: A:\NDIS.DOS\ The modifications to the "CONFIG.SYS", "AUTOEXEC.BAT", and "PROTOCOL.INI" files are shown below as an example for PCMCIA Ethernet Cards. CONFIG.SYS FILES=20 BUFFERS=20 DEVICE=C:\BANYAN\PROTMAN.DOS /I:C\BANYAN DEVICE=C:\BANYAN\EZNDIS.DOS AUTOEXEC.BAT PATH=C:\DOS PROMPT $P$G C: CD\BANYAN BAN PROTOCOL.INI [PROTOCOL MANAGER] DRIVENAME= PROTMAN$ [EZNDIS_NIF] DRIVENAME = EZNDIS$ [VINES_XIF] DRIVENAME = NDISBAN.DOS$ BINDINGS = EZNDIS_NIF -------------------------------------[END]--------------------------------------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.