1. Win2kXP_20V5.5.zip Driver
2. Win2K-XP V 5.5 Installation.txt File Contents

Win2K-XP V 5.5 Installation.txt Driver File Contents (Win2kXP_20V5.5.zip)

_______________________________________________________________________________________________________
Released:   22-Mar-2002
Version:       5.5
For Models: X6-33M to use with Throttle (buttons T1 and T2 will not function when throttle is put into use).  To use without throttle, download Version 5.4
_______________________________________________________________________________________________________

Driver Installation under WindowsR 2000 (with DirectX):

1.     	Download the update driver to your computer and remember the path of directory.
2. 	Click  >START>SETTINGS>CONTROL PANEL>GAME CONTROLLERS
3. 	At the GENERAL screen, REMOVE any existing controllers listed here.
4. 	Click  >ADD...>ADD Other...>HAVE DISK...>BROWSE...
5. 	Locate the directory where you downloaded the driver and find the file "oemsetup.inf".
6.	Click  >OPEN>OK.
7. 	A selection screen opens up.  A list of "X6-33M with throttle" appears.
8. 	Select your model from the list and click >NEXT>NEXT to install driver.
9. 	Click  >FINISH to close the installation wizard.
10. 	It now prompts you for a restart. Click >OK to restart.
11. 	After restart, Click  >START>SETTINGS>CONTROL PANEL>GAME CONTROLLERS.
12. 	At the GENERAL screen, click >ADD and select "X6-33M with throttle".
13. 	Click >OK and driver installation begins.
14. 	Click  >FINISH to close the installation window.
15. 	The computer prompts for a restart.  Click >OK to restart.
16. 	After restart, repeat step 3 and now you see a newly installed driver on your list.
17. 	Select this driver and click  >PROPERTIES>SETTINGS>CALIBRATION  and follow calibration wizard
18.	Buttons 5 and 8 may be on but should return to normal after calibration.
19. 	Click  >TEST to test the pad's functions.
20. 	Click >APPLY>OK to exit.
21. 	Your gamepad is ready for action.


Driver installation under WindowsR XP :

1.	Download the update driver to your computer and remember the path of directory.
2.	Click >START>SETTINGS>CONTROL PANEL.
3.	Double click >Add Hardware icon under "CONTROL PANEL".
4.	You will now see the "Yes,¡K" and "No,¡K" icon. Click >YES, I HAVE ALREADY CONNECTED THE HARDWARE.
5.	At "Add Hardware Wizard" select "add new hardware device".
6.	And then select "install the hardware that I manually select from a list" and Click >NEXT.
7.	Select "Sound, Video and game controllers" and click >NEXT.
8.	Click >HAVE DISK>BROWSE
9.	Locate the directory where you downloaded the driver and find the file "oemsetup.inf".
10.	Select "X6-33M with throttle" in the device driver menu. 
11.	And click >CONTINUE ANY WAY.
12.	under "CONTROL PANEL" click >ADD and select "X6-33M with throttle".
13.	Now click >OK.
14.	You will now be returned to the "GENERAL" screen and the system will start to install the new driver.
15.	Select "Install the software automatically (recommended)".
16.	Click >NEXT.
17.	repeat steps 11 to 13.
18.	under "CONTROL PANEL" you will see "X6-33M with throttle".
19.	Now click >PROPERTIES>SETTINGS>CALIBRATION and follow calibration wizard. 
20.    	Buttons 5 and 8 may be on but should return to normal after calibration.
21.	Click >TEST to test the pad's functions.
22.	Click >APPLY>OK to exit.
23.	Your gamepad is ready for action.

________________________________________________________________________________________________________
Notes for Model X6-33M:
  Before calibration, make sure all switches are switched "OFF".  Otherwise, you will get a "NOT CONNECTED" message.
________________________________________________________________________________________________________
Website:  www.mega-world.com
E-Mail:     info@mega-world.com
Copyright 2002 Mega World International Ltd.
WindowsR 2000 and WindowsR XP are registered trademarks of Microsoft Corporation