PACKAGE VERSION:
43
Please address questions on release notes to:
Catherine Stevens
781-461-3896
catherine.stevens@analog.com
DATE PREPARED:
5/27/99
FIELD APPLICATIONS ENGINEER OR EQUIVALENT:
WDM driver contact: Jeremy Freeman
781-461-3675
jeremy.freeman@analog.com
Installer contact: Larry Beach
781-461-3026
larry.beach@analog.com
HARDWARE ENGINEER:
Fred Loeb
781-461-3773
fred.loeb@analog.com
PURPOSE OF RELEASE:
This build is a Release Candidate of the WDM driver
for Intel 82801AA/AB chipset.
COMPONENT/VERSION:
SoundMAX WDM Driver Version: 4.10.2225
Installer Version: 1.00.004
COMPONENT QUALIFICATION AND LANGUAGE:
;
; AL=Alpha
; BT=Beta
; RC=Release Candidate
; GM=Golden Master
US (RC).. US (English)
GB (RC).. United Kingdom (English)
AP ( ).. APD (English)
AR (RC).. Middle East Region (Arabic OS/ English SW)
AU ( ).. Australia (English)
NZ ( ).. New Zealand (English)
ED ( ).. US Educational (English)
FC ( ).. Canada (French)
BR (RC).. Brazil (Brazilian Portuguese)
LA ( ).. Latin America (LA Spanish)
LX ( ).. Luxemboug
ME ( ).. Malaysia (English)
TW (RC).. Taiwan (Traditional Chinese)
CH (RC).. PRC (Simplified Chinese)
DK (RC).. Denmark (Danish)
NL (RC).. Netherlands (Dutch)
FI (RC).. Finland (Finnish)
FR (RC).. France (French)
GR (RC).. Germany (German)
KR (RC).. Korea (Korean [Hangeul])
NO (RC).. Norway (Norwegian)
PT (RC).. Portugal (Brazilian Portuguese)
SP (RC).. Spain (LA Spanish)
SE (RC).. Sweden (Swedish)
JP (RC).. Japan (Japanese)
SG ( ).. Switzerland (German)
SF ( ).. Switzerland (French)
IT (RC).. Italy (Italian)
TH (RC).. Thailand (Thai)
BN ( ).. Belgium (Dutch)
BF ( ).. Belgium (French)
AS ( ).. Austria (German)
PH ( ).. Philippines (PTT)
SI ( ).. Singapore (English)
CE ( ).. Canada (English)
EE ( ).. Europe (English)
IN ( ).. India
HK ( ).. Hong Kong (English)
RU (RC).. Russia (Russian)
CANDIDATE NOTES/KNOWN ISSUES/LANGUAGES SUPPORTED:
Localization is supported in this release. The internationalized
version of Install Shield does not support Arabic, however, the driver
does.
INSTALL AND REMOVE INSTRUCTIONS:
This software is installed automatically by the Microsoft Windows
Hardware Installation Wizard. When the hardware is detected, the
Wizard will prompt for the disk containing the device information
file. Cancel out of the Hardware Install Wizard, and run the Setup
program once the computer finishes booting.
Factory Install/ Driver Install
To run the utility before login for installation along with the OS, use
the RunServicesOnce key under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\
Windows\CurrentVersion.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\
RunServiceOnce needs to have a value, ADI_Install, whose data is
<Path to Setup files>\Setup.exe -s entered in the registry.
This entry can be made using the MSBATCH.INF file during installation
of the OS.
The Setup.exe program is copying the files needed by the Hardware Setup
Wizard to automatically load the driver. Because the RunServicesOnce
key launches programs asynchronously, the developer writing the install
script must make sure this setup has completed before the Hardware
Wizard starts. The amount of time required for the setup application to
finish will depend on where the setup application is running from.
For example, it takes approximately 15 seconds to run from a hard
drive.
To run the utility after login for installation along with the OS, use
the RunOnce key under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\
CurrentVersion.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce
needs to have a value, ADI_Install, whose data is <Path to Setup files>
\Setup.exe -s entered in the registry.
This entry can be made using the MSBATCH.INF file during installation
of the OS.
The developer writing the install script will need to cancel out of the
Hardware Wizard when it detects a board and is requesting the drivers.
The RunOnce key will then execute the setup just after windows finishes
booting. The system will need to be rebooted to finish the install
using this registry key.
Install and Update
1. Run Setup.exe.
2. Choose to reboot at the end of the install program.
The system will reload the drivers and make any adjustments in the INF
file if so required.
Uninstall
1. Go to Start\Settings\Control Panel.
2. Click on the System icon.
3. Select the Device Manager tab.
4. Double-click on Sound, Video, and Game Controllers.
5. Click on the "SoundMAX Integrated Digital Audio" heading.
6. Click on the Remove button at the bottom of the window.
7. Click on the OK button in the dialog box that pops up.
8. Close the Device Manager window.
9. Go to the Add/Remove programs icon and double-click on the SoundMAX
uninstall.
This procedure will remove all files loaded at install, and the
installer will need to be run again before the sound system will work.
CERTIFICATION VERIFICATION:
Is the deliverable PC98 Compliant? - (Yes),
Necessary? - (YES)
Is the deliverable PC99 Compliant? - (Yes), Necessary? - (Yes)
Is Windows Hardware Quality Labs submission necessary? - (YES)
Does the component contain "Bit Flipped" .vxd files? - (NO)
Identify the file(s) by name: ()
Presence of CAT? Populated - (NO) Placeholder - (YES) Necessary? - (?)
Is the component Direct X Certified? DX6.x - (NO) or DX7 - (NO)
Submission ID: ()
Master ID: ()
HARDWARE AND SOFTWARE DEPENDENCIES:
This driver has been designed for and tested with Windows 98 only.
There are issues with Windows 98 Gold that will cause problems in
Direct Sound. This driver is intended to be used with Windows 98 SE.
This driver will run under Windows2000,but has not gone through the
full test process. This driver was loaded on a system running Windows
2000 (build 2031). It would not load with Windows 2000 (build 2020).
The Microsoft audio driver also did not load with this build. This has
been reported to Microsoft.
1. The system must contain one of the following Intel processor and
chipset configurations:
Chip set: Intel(r) 810 Chipset
Intel(r) 820 Chipset
Processor: Intel(r) Pentium(r) II processor
Intel(r) Pentium(r) II Xeon(tm) processor
Intel(r) Celeron(tm) processor
2. Ensure that a mouse is connected to the system.
3. One of the following operating systems must be installed on the
system:
Windows 98 SE 4.10.2222
Windows 2000 Professional (build 2031)
This driver is built for the Microsoft(R) Windows(R) Operating Systems
that support the WDM driver model, currently Windows 98 and Windows
2000.
SOFTWARE SUPERSEDED:
4.10.2222
BIOS DEPENDENCIES:
[Enter any BIOS dependencies associated with this deliverable.]
PRODUCT ENHANCEMENTS/FIXED DEFECTS:
[Identify all fixed defects and product enhancements to the component
in this section]
* Fixed problem with wave files playing at lower rate
when simultaneous files at different sample rates.
* Fixed stereo wide problem. Re-established setting
after reboot.
* Added code to set initial value from INF file for
PCM Out.
* Fixed record problem in Win2000.
* Fixed ACT Wave Driver Test 9:14.
* Additional changes made to improve releases
and acquires of mappings.
* Removed Subsystem Ids from INF that are not required.
* Removed entry in INF file which checked Intel chipset
revision level.
PRODUCT ENHANCEMENTS/DEFECTS NOT COMPLETED IN THIS RELEASE:
[Identify all defects and product enhancements scheduled but not
completed in this section]
KNOWN ISSUES & BUGS:
[Identify all known issues or defects that are not fixable or
scheduled to be released. Include relevant component interaction
issues that will impact the deliverables behavior.]
Track # 71
DESCRIPTION: Problem occurs while loading the 1881 driver,
Version 4.10.2111. The subsystem ID returned by the bios is
incorrect.
Reported in driver version: 4.10.2111
Comments: For windows 98, the subsystem is used to aid in
identifying and matching the inf file to the
hardware. If the bios returns an unexpected
subsystem number that is not in the inf file then
the drivers will not load correctly. A temporary
work around for this problem is to include the
subsystem ID returned by the bios until the bios is
corrected.
Track # 76
DESCRIPTION: If MIDI, AVI, and wave files are played and then
the wave file is muted, the MIDI is also muted. Only a snippet
of MIDI is heard every few seconds.
Reported in driver version: 4.10.2111
Comments: This is an issue relating to KMIXER. It is
responsible for the mixing, attenuation, and muting
of the "soft" audio streams.
Track # 77
DESCRIPTION: All full-duplex testing in ACT fails. There are
more problems on Whitney platform than on Camino platform.
Reported in driver version: 4.10.2111
Track # 83
DESCRIPTION: A pop occurs on start and exit of Windows.
Comments: This is not a driver issue. This is a hardware
issue.
Track # 85
DESCRIPTION: There is additional static on MIDI when heavy
I/O and DMA are off.
Comments: This is not a driver issue. This problem is specific
to planar design.
SYSTEM FILE/REGISTRY CHANGES:
Not available for this release.
DELIVERABLE CONTENTS
DATA TAG 155 06-01-99 8:39a DATA.TAG
ADI_RMV EXE 23,888 03-29-99 12:22p Adi_Rmv.exe
DATA1 CAB 469 06-01-99 8:39a data1.cab
DATA1 HDR 3,761 06-01-99 8:39a data1.hdr
LANG DAT 23,541 01-12-99 11:34a lang.dat
LAYOUT BIN 1,193 06-01-99 8:39a layout.bin
OS DAT 450 07-27-98 6:41p os.dat
SETUP EXE 61,440 01-13-99 3:38p Setup.exe
SETUP INI 105 06-01-99 8:39a SETUP.INI
SETUP INS 14,093 05-07-99 8:58a setup.ins
SETUP ISS 324 02-02-99 10:18a setup.iss
SETUP LID 233 06-01-99 8:39a setup.lid
SETUPDIR <DIR> 06-01-99 10:49a setupdir
SMWDM INF 17,368 05-26-99 3:25p Smwdm.inf
SMWDM SYS 53,920 05-26-99 2:27p smwdm.sys
WIN256_3 BMP 303,684 01-26-99 12:07p win256_3.bmp
_INST32I EX_ 296,674 02-23-99 11:45a _INST32I.EX_
_ISDEL EXE 8,704 10-27-98 1:08p _ISDel.exe
_SYS1 CAB 2,673,000 06-01-99 8:38a _sys1.cab
_SYS1 HDR 14,667 06-01-99 8:38a _sys1.hdr
_USER1 CAB 5,488 06-01-99 8:39a _user1.cab
_USER1 HDR 18,156 06-01-99 8:39a _user1.hdr
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.