SC16-3D(L) PnP Sound Card v1.10
C o n t e n t s
===============
1. Overview
2. System Requirements
3. Mixer Application
4. Installing in Windows 95
5. Known Issues and bugs
-----------------------------------------------------------------------------
1. OVERVIEW
This README.TXT contains instructions to install the sound card under Win95.
-----------------------------------------------------------------------------
2. SYSTEM REQUIREMENTS
- 80486 PC-AT compatible or faster machine.
- 4 MB DRAM or greater.
- 1 free 16-bit ISA-bus expansion slot.
- 400 KB free hard disk space for minimum software installation.
----------------------------------------------------------------------------
3. MIXER APPLICATIONS
A mixer was created and located at the right bottom corner on the Task Bar.
This mixer application can be used to control the volume outputs of the
sound card under windows 95 environment.
----------------------------------------------------------------------------
4. INSTALLING IN WINDOWS 95
Condition 1:
============
This installation of Win95 driver only works on system which has already have
Win95 Operating System properly loaded.
To install the driver, first, power off the system before inserting the sound
card and secure it in any of the available 16 bit ISA bus slot. Power On the
system, when win95 boot-up it will auto-detect the newly insert sound card and
will be prompted for "driver from disk provided by manufacturer...". Please
insert the Installation CD that come with this sound card into your CDROM
drive and path to the WIN95 directory. Hit the <Enter> key to complete the
installation.You will then be automatically lead to the Installation for
Voyetra Multimedia Application. Choose the language by clicking one of the
flags. Proceed on by following the simple instructions to complete the
installation.
After Voyetra Multimedia Application setup is completed, please
reboot the system. This is due to the fact that the setup program is being
streamlined for user-friendliness and to reduce multiple CD swapping during
the drivers installation. Only after rebooting will all the drivers takes
effect.
Note: If you do not have Win95 Multimedia Applications installed previously,
system will prompt you to complete the installation of the Multimedia
Applications prior to the copying of the Audio drivers. Just follow the
on-screen instructions to complete the installation of Multimedia
Application and the sound card drivers. Please have your Win95 CDROM
ready if this is the case.
Condition 2:
============
Installation of Win95 OSR2
==========================
If you are installing WIN95 OS (OSR2) on a system which has been pre-
installed with the above Sound Card, please take note that the sound card
inside your system will not be properly installed after the installation of
Win95 OS.
To correct this problem,
1. Open "Control Panel" and double-click the "System" applet.
2. Open "Device Manager" and double-click at the "Other Devices" option.
3. Select all entries maked with "ADSxxxx PnP SOUND Device" and delete them
by pressing the <Delete> key one at a time.
4. Restart WIN95 OSR2.
5. Upon rebooting, Win95 OSR2 will auto-detect the deleted devices and
prompts for the Sound Card Installation CD.
6. Insert the Sound Card Installation CD into your CDROM drive
and click [OK] to complete the installation. You will then be automatically
lead to the Installation for Voyetra Multimedia Application. Choose the
language by clicking one of the flags. Proceed on by following the simple
instructions to complete the installation.
7. After Voyetra Multimedia Application setup is completed, please
reboot the system. This is due to the fact that the setup program is being
streamlined for user-friendliness and to reduce multiple CD swapping during
the drivers installation. Only after rebooting will all the drivers takes
effect.
---------------------------------------------------------------------------
5. KNOWN ISSUES AND BUGS
1. Balance Control not effective when recording WAVE file.
Known driver issue.
2. Recording through CD or LINE-IN sometimes noisy.
Hardware issue.
---------------------------------------------------------------------------
***********************************************************
* In case you encounter any problem with our products, *
* please quote the following model(s) when calling our *
* Technical Support : *
* SC16-3D(L) Sound Card *
***********************************************************
------- The End ---------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.