; Sarian Systems ISDN Windows Modem Setup File v1.2
[Version]
Signature="$CHICAGO$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%SarianSystems%
DriverVer=09/10/2001,1.2
[Manufacturer]
%Sarian% = Sarian
[Sarian]
%Modem1% = Modem1, IM1040-ISDN
%Modem2% = Modem2, IR1140-ISDN
%Modem3% = Modem3, IR1131-ISDN
%Modem4% = Modem4, TA1020-ISDN
%Modem5% = Modem5, IT1000-ISDN
[Strings]
Sarian = "Sarian"
CompanyName = "Sarian Systems Ltd"
Modem1 = "Sarian Systems IM1040 ISDN Multiplexer"
Modem2 = "Sarian Systems IR1140 ISDN Routerplexer"
Modem3 = "Sarian Systems IR1131 ISDN Routerplexer"
Modem4 = "Sarian Systems TA1020 ISDN Terminal Adaptor"
Modem5 = "Sarian Systems IT1000 ISDN Tester"
[Modem1]
AddReg=All, GenericAddReg, Modem1.AddReg, EXTERNAL
[Modem2]
AddReg=All, GenericAddReg, Modem2.AddReg, EXTERNAL
[Modem3]
AddReg=All, GenericAddReg, Modem3.AddReg, EXTERNAL
[Modem4]
AddReg=All, GenericAddReg, Modem4.AddReg, EXTERNAL
[Modem5]
AddReg=All, GenericAddReg, Modem5.AddReg, EXTERNAL
[All]
HKR,,FriendlyDriver,,Unimodem.vxd
HKR,,DevLoader,,*VCOMM
HKR,,ConfigDialog,,modemui.dll
HKR,,PortSubClass,1,02
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"
[EXTERNAL]
HKR,, DeviceType, 1, 01
[Modem1.AddReg]
; procalc tool can be used to check settings of next line which describes modem' properties
; generally customization entries are added here which override commands from the MfgAddReg section
HKR,, Properties, 1, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 30,01,00,00, 00,C2,01,00, 00,F4,01,00
[Modem2.AddReg]
HKR,, Properties, 1, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 30,01,00,00, 00,C2,01,00, 00,F4,01,00
[Modem3.AddReg]
HKR,, Properties, 1, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 30,01,00,00, 00,C2,01,00, 00,F4,01,00
[Modem4.AddReg]
;TA 1020 - COnfigured for > 115k2 baud rates
HKR,, Properties, 1, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 30,01,00,00, 00,84,03,00, 00,84,03,00
[Modem5.AddReg]
HKR,, Properties, 1, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 30,01,00,00, 00,C2,01,00, 00,F4,01,00
[GenericAddReg]
HKR, Init, 1,, "AT<cr>"
HKR, Init, 2,, "ATE0V1<cr>"
HKR, Monitor, 1,, "ATS0=0<cr>"
HKR, Monitor, 2,, "None"
HKR, Answer, 1,, "ATA<cr>"
HKR, Hangup, 1,, "ATH<cr>"
HKR,, Reset,, "ATZ<cr>"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, Pulse,, "P"
HKR, Settings, Tone,, "T"
HKR, Settings, FlowControl_Off,, ""
HKR, Settings, FlowControl_Hard,, ""
HKR, Settings, FlowControl_Soft,, ""
; DTE/DCE speeds will not be exact for generic modems because we will
; treat CONNECT ### as a DCE speed when some modems will report it as DTE.
HKR, Responses, "<cr>", 1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<lf>", 1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING<cr><lf>", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>", 1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BUSY<cr><lf>", 1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>", 1, 07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT<cr><lf>", 1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "0<cr>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "2<cr>", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "3<cr>", 1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "4<cr>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "6<cr>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "7<cr>", 1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "8<cr>", 1, 07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "OK", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "RING", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NO CARRIER", 1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "ERROR", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NO DIALTONE", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NO DIAL TONE",1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "BUSY", 1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NO ANSWER", 1, 07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "FAX", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "DATA", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "VOICE", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "RINGING", 1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "DIALING", 1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "RRING", 1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "DELAYED", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "BLACKLISTED", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "+FCERROR", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "CONNECT", 1, 02, 00, 00,00,00,00, 00,00,00,00
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.