Using SEIKO Precision Printer Driver
Microsoft(R) Windows NT(R) 4.0
This diskette incorporates the printer driver for the SEIKO Precision Printers
to be used in Microsoft Windows NT 4.0. This [\NT40DRV] directory now includes
the following printer driver files:
* BP-6000
* BP-9000
* FB-840
* FB-900
For installation of the printer driver, the following files are needed.
So please prepare the Windows NT 4.0 system disk or CD-ROM.
RASDD.DLL,
RASDDUI.DLL,
RASDDUI.HLP
As for installing the printer driver and setting the Printer, refer to the
following:
<<<<< Installing the Printer Driver >>>>>
1. Click the <Start> button.
2. Point the <Setting> menu.
3. Click the <Printers> menu.
4. In the Printers Window, double-click the <Add Printer> icon.
5. In the Add Printer wizard, proceed to installation according to the
instructions of the monitor.
6. While selecting the manufacturer and model, click the <Have disk...>
button, and select the path "A:\NT40DRV" for the dialog box "Copy
manufactures files from:".
7. Choose the <OK> button.
8. For instructions on how to configure your printer, please see the
Microsoft Windows NT 4.0 User's Manual.
<<<<< Setting the Printer >>>>>
1. BP-6000
Select the correct paper size and paper path which is suitable for the
document to be printed according to the following instruction. Refer to
the Allow Key below to use for selection.
<- : Left arrow. Same as "PARK" key.
-> : Right arrow. Same as "TOF SET" key.
^ : Up arrow. Same as "M.LF" key.
v : Down arrow. Same as "M.RLF" key.
1.1. Setup the paper form.
From the < Printer Setup > dialog box, choose the paper form from the
following list.
+------------------------------------------------------------+
| Source | Name |
|--------------------------+---------------------------------|
| | |
| Tractor feed | US Standard Fanfold |
| | 14 7/8 x 11 in |
| | 10 x 11 in |
| | 12 x 11 in |
| | 15 x 11 in |
| | |
|--------------------------+---------------------------------|
| | |
| Cut Sheet(Manual) | Letter 8 1/2 x 11 in |
| BIN-1 | Legal 8 1/2 x 14 in |
| BIN-2 | A3 297 x 420 mm |
| | A4 210 x 297 mm |
| | B4(JIS) 257 x 364 mm |
| | B5(JIS) 182 x 257 mm |
| | User Defined Size |
| | |
+------------------------------------------------------------+
The documents formatted in non-supported sizes may print incorrectly.
In these instances, adjust the top, bottom, left and right of margin on
setup menu for your own printer. This should solve the problem.
1.2. How to set the printer to the factory function setting.
(1) In the off line mode, press the "SETUP" key to enter the setup mode.
(2) Press the "->" or "<-" key to indicate the "8 <SUB MENU>" on the LCD
display, then Press the "v" key to enter the SUB-MENU.
(3) Press the "->" or "<-" key to indicate the "52 FACTORY SET" on the LCD
display.
(4) Press the "v" key, then "PRESS ENTER SW" is indicated on the LCD display.
(5) Press the "ENTER" key, then "SETUP: COMPLETED" is indicated on the LCD
display.
(6) Press the "EXIT" or "ONLINE" key to exit from the setup mode.
1.3. How to identify the CSF(option) installed mode.
(1) In the off line mode, press the "SETUP" key to enter the setup mode.
(2) Press the "->" or "<-" key to indicate the "8 <SUB MENU>" on the LCD
display, then Press the "v" key to enter the SUB-MENU.
(3) Press the "->" or "<-" key to indicate the "13 CSF OPTION" on the LCD
display.
(4) Use the "^" or "v" key to select CSF mode, press the "ENTER" key.
(5) Press the "EXIT" or "ONLINE" key to exit from the setup mode.
1.4. How to set the paper size.
1.4.1 Fanfold paper
(1) Indicate the "3 PAGE FANFOLD" on the LCD display in the setup mode.
(2) Use the "^" or "v" key to select the page length, press the "ENTER"
key.
(3) Press the "EXIT" or "ONLINE" key to exit from the setup mode.
1.4.2 Single sheet paper
(1) Indicate the "4 PAGE SINGLE" on the LCD display in the setup mode.
(2) Use the "^" or "v" key to select the paper size, press the "ENTER"
key.
(3) Press the "EXIT" or "ONLINE" key and to exit from the setup mode.
(4) When you select the User Defined Size:
Select the larger size paper than your using paper by the setup
mode "4 PAGE SINGLE".
Set the application software so that the print area can not exceed
your using paper.
1.5. How to select the paper path.
(1) Paper path can not be changed while the paper is loaded in the printer.
Eject the paper loaded in the current paper path by pressing the "PARK"
key.
(2) When the printer is ON-LINE press "ON LINE" key to make the printer to
be OFF-LINE. Then select the correct paper path to be selected by
pressing the "BIN" key.
(3) Set the friction lever to the correct position depending on the selected
paper path.
2. BP-9000
Select the correct paper size and paper path which is suitable for the
document to be printed according to the following instruction. Refer to
the Allow Key below to use for selection.
<- : Left arrow. Same as "PARK" key.
-> : Right arrow. Same as "QUALITY" key.
^ : Up arrow. Same as "M.LF" key.
v : Down arrow. Same as "M.RLF" key.
2.1. Setup the paper form.
From the < Printer Setup > dialog box, choose the paper form from the
following list.
+------------------------------------------------------------+
| Source | Name |
|--------------------------+---------------------------------|
| | |
| Tractor feed | German Standard Fanfold |
| | 8 1/2 x 12 in |
| | US Standard Fanfold |
| | 14 7/8 x 11 in |
| | |
|--------------------------+---------------------------------|
| | |
| Cut Sheet(Manual) | Letter 8 1/2 x 11 in |
| BIN-1 | Legal 8 1/2 x 14 in |
| BIN-2 | A3 297 x 420 mm |
| | A4 210 x 297 mm |
| | B4(JIS) 257 x 364 mm |
| | B5(JIS) 182 x 257 mm |
| | User Defined Size |
| | |
+------------------------------------------------------------+
The documents formatted in non-supported sizes may print incorrectly.
In these instances, adjust the top, bottom, left and right of margin on
setup menu for your own printer. This should solve the problem.
2.2. How to set the printer to the factory function setting.
(1) In the off line mode, press the "SETUP" Key to enter the setup mode.
(2) Press the "->" or "<-" key to indicate the "8 SELECT SETUP" on the LCD
display.
(3) Press the "^" or "v" key to indicate the "SET. : FACTORY" on the LCD
display.
(4) Press the "ENTER" key.
(5) When "PRESS RESET SW" is indicated on the LCD display, press the "RESET"
switch.
2.3. How to identify the CSF(option) installed mode.
(1) While keeping pressed the "SETUP" Key, press the "RESET" switch to enter
the extended setup mode.
(2) Press the "->" or "<-" key to indicate "49 CSF OPTION" on the LCD
display.
(3) Use the "^" or "v" key to select CSF mode, press the "ENTER" key.
(4) Press the "EXIT" or "SETUP" key to exit from the setup mode.
(5) When the "PRESS RESET SW" on the LCD display is indicated, press the
RESET switch.
2.4. How to set the paper size.
2.4.1 Fanfold paper
(1) Indicate the "2 PAGE FANFOLD" on the LCD display in the setup mode.
(2) Use the "^" or "v" key to select the page length, press the "ENTER"
key.
(3) Press the "EXIT" or "SETUP" key to exit from the setup mode.
2.4.2 Single sheet paper
(1) Indicate the "3 PAGE SINGLE" on the LCD display in the setup mode.
(2) Use the "^" or "v" key to select the paper size, press the "ENTER"
key.
(3) Press the "EXIT" or "SETUP" key and to exit from the setup mode.
(4) When you select the User Defined Size:
Select the larger size paper than your using paper by the setup
mode "3 PAGE SINGLE".
Set the application software so that the print area can not exceed
your using paper.
2.5. How to select the paper path.
(1) Paper path can not be changed while the paper is loaded in the printer.
Eject the paper loaded in the current paper path by pressing the "PARK"
key.
(2) When the printer is ON-LINE press "ON LINE" key to make the printer to
be OFF-LINE. Then select the correct paper path to be selected by
pressing the "PAPER" key while pressing and holding the "SHIFT" key.
(3) When the correct paper path to be selected is displayed on the LCD wait
a minute until the buzzer sound, then the printer goes into OFF-LINE
automatically and the correct paper path is selected.
(4) Set the friction lever to the correct position depending on the selected
paper path.
3. FB-840, FB-900
Use the normal factory default setting. Paper size and paper path are
automatically selected when the document is printed.
When changing the factory default setting or using the options read the
following instruction. Refer to the Allow Key below to use for selection.
<- : Left arrow. Same as "EJECT/LOAD" key.
-> : Right arrow. Same as "FORM FEED" key.
^ : Up arrow. Same as "LINE FEED" key.
v : Down arrow. Same as "REVERSE LF" key.
3.1. Setup the paper form.
From the < Printer Setup > dialog box, choose the paper form from the
following list.
+---------------------------------------------------------------------+
| Source | Name |
|-----------------------+---------------------------------------------|
| | |
| Front Tractor | Fanfold ( 15 x n in ) |
| Rear Tractor | Fanfold ( 12 x n in ) |
| | Fanfold ( 10 x n in ) |
| | ( n = 2 - 16.5 ) |
| | |
|-----------------------+---------------------------------------------|
| | |
| | LETERp (8.5 x 11 in) |
| | LETERl (11 x 8.5 in) |
| | H.LETTERp (5.5 x 8.5 in) |
| Manual | H.LETTERl (8.5 x 5.5 in) |
| CSF | LEGALp (8.5 x 14 in) |
| | LEGALl (14 x 8.5 in) |
| | EXECTIVEp (7.25 x 10.5 in) |
| | EXECTIVEl (10.5 x 7.25 in) |
| | Executive ( P:7.25 x 10.5 in ) |
| | G.LETTERp (8 x 10.5 in) |
| | G.LETTERl (10.5 x 8 in) |
| | G.LEGALp (8.5 x 13 in) |
| | G.LEGALl (13 x 8.5 in) |
| | LEDGERp (11 x 17 in) |
| | F4p (210 x 330 mm), F4l (330 x 210 mm) |
| | A3p (297 x 420 mm), A3l (420 x 297 mm) |
| | A4p (210 x 297 mm), A4l (297 x 210 mm) |
| | A5p (148 x 210 mm), A5l (210 x 148 mm) |
| | POST C.p (100 x 148 mm) |
| | POST C.p (100 x 148 mm) |
| | COM-6p (92 x 165 mm) |
| | COM-6l (165 x 92 mm) |
| | COM-10p (104 x 241 mm) |
| | COM-10l (241 x 104 mm) |
| | MONARCHp (90 x 190 mm) |
| | MONARCHl (190 x 90 mm) |
| | DLp (110 x 220 mm), DLl (220 x 110 mm) |
| | C5p (162 x 229 mm), C5l (229 x 162 mm) |
| | User Defined Size |
| | |
+---------------------------------------------------------------------+
The documents formatted in non-supported sizes may print incorrectly.
In these instances, adjust the top, bottom, left and right of margin on
setup menu for your own printer. This should solve the problem.
3.2. How to set the printer to the factory function setting.
When the four keys LINE FEED, EJECT/LOAD, PAPER PATH and PAPER FORM are
pressed at the same time when the power is in, the printer is set to the
factory setting.
3.3. How to identify the option installed mode.
(1) While keeping pressed the "ALT" Key, press the "SETUP" switch to enter
the extended setup mode.
(2) Press the "->" or "<-" key to indicate the "60 OPTION" on the LCD
display.
(3) Use the "^" or "v" key to select option setting, press the "ENTER"
key.
(4) Press the "SETUP" key to exit from the setup mode.
3.4. How to set the paper size and paper path.
(1) The paper size and paper path are automatically set by software.
(2) When you select the User Defined Size:
Select the larger size paper than you are using from the setup mode
"4 PAGE LENGTH".
Set the application software so that the print area can not exceed
the paper you are using.
Note. Microsoft is a registered trademark of Microsoft Corporation.
Windows NT is a registrered trademark of Microsoft Corporation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.