[Identification] OptionType = PRINTER [LanguagesSupported] ENG [Options] "SEIKO Precision BP-9000" = rasddui, bp9000, rasdd "SEIKO Precision FB-840" = rasddui, fb840, rasdd [OptionsTextENG] "SEIKO Precision BP-9000" = "SEIKO Precision BP-9000" "SEIKO Precision FB-840" = "SEIKO Precision FB-840" [StringsENG] String1 = "The printer model " String2 = " is already installed." String3 = "Failed to connect to the print server." String4 = "The driver files for the printer model " String5 = " couldn't be copied. Failed to install the printer model." String6 = "Access is denied. You must be logged on as a member of the Administrators "+ "group to carry out this operation." String7 = " could not be installed." [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) goto returnoptions else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 0) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Status = STATUS_FAILED set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) else set Status = STATUS_NOLANGUAGE goto finish_InstallOption endif read-syms Strings$($0) set OptionList = ^(Options, 0) ifcontains $(Option) in $(OptionList) else goto finish_InstallOption endif set OptionList = "" set ConfigOption = #(Options, $(Option), 1) set DataOption = #(Options, $(Option), 2) set DriverOption = #(Options, $(Option), 3) installtheoption = + ifstr(i) $(AddCopy) == "YES" install Install-AddCopyOption ifstr(i) $(STF_INSTALL_OUTCOME) != "STF_SUCCESS" Debug-Output "Adding video files to copy list failed" goto finish_InstallOption endif endif ifstr(i) $(DoCopy) == "YES" read-syms ProgressCopy$($0) install Install-DoCopyOption ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_FAILURE" Debug-Output "Copying files failed" goto finish_InstallOption else-ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT" set Status = STATUS_USERCANCEL goto finish_InstallOption endif endif ifstr(i) $(DoConfig) == "YES" set DriverPath = $(!STF_PRNDRIVERPATH)"\"#(Files-PrinterDriver, $(DriverOption), 2) set DataFilePath = $(!STF_PRNDRIVERPATH)"\"#(Files-PrinterData, $(DataOption), 2) set ConfigFilePath = $(!STF_PRNDRIVERPATH)"\"#(Files-PrinterConfig, $(ConfigOption), 2) LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(DriverPath) ifstr(i) $(STATUS) == YES LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(DataFilePath) ifstr(i) $(STATUS) == YES LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(ConfigFilePath) endif endif ifstr(i) $(STATUS) == NO set OptionText = #(OptionsText$($0), $(Option), 1) shell "subroutn.inf" SetupMessage $($0) "NONFATAL" $(String4)$(OptionText)$(String5) Debug-Output "Copying printer files failed" goto finish_InstallOption endif install Install-Configure ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_FAILURE" Debug-Output "Installing printer driver failed" goto finish_InstallOption else-ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT" set Status = STATUS_USERCANCEL goto finish_InstallOption endif ifstr(i) $(STATUS) != "ADDED" set OptionText = #(OptionsText$($0), $(Option), 1) ifstr(i) $(STATUS) == "PRESENT" shell "subroutn.inf" SetupMessage $($0) "NONFATAL" $(String1)$(OptionText)$(String2) else-ifstr(i) $(STATUS) == "DENIED" shell "subroutn.inf" SetupMessage $($0) "NONFATAL" $(String6) else shell "subroutn.inf" SetupMessage $($0) "NONFATAL" $(String1)$(OptionText)$(String7) endif goto finish_InstallOption endif endif set Status = STATUS_SUCCESSFUL finish_InstallOption = + Return $(Status) [Install-AddCopyOption] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionKeyFileToCopyList Files-PrinterConfig + $(ConfigOption) + $(SrcDir) + $(!STF_PRNDRIVERPATH) AddSectionKeyFileToCopyList Files-PrinterData + $(DataOption) + $(SrcDir) + $(!STF_PRNDRIVERPATH) AddSectionKeyFileToCopyList Files-PrinterDriver + $(DriverOption) + $(SrcDir) + $(!STF_PRNDRIVERPATH) exit [Install-DoCopyOption] CopyFilesInCopyList exit [Install-Configure] set Model = $(Option) ifstr(i) $(!STF_PRNPLATFORM) == "w32x86" set Environment = "Windows NT x86" else-ifstr(i) $(!STF_PRNPLATFORM) == "w32mips" set Environment = "Windows NT R4000" else set Environment = "" endif set Driver = #(Files-PrinterDriver, $(DriverOption), 2) set DataFile = #(Files-PrinterData, $(DataOption), 2) set ConfigFile = #(Files-PrinterConfig, $(ConfigOption), 2) LibraryProcedure STATUS,$(!LIBHANDLE), SetupAddPrinterDriver + $(Model) + $(Environment) + $(Driver) + $(DataFile) + $(ConfigFile) + $(!STF_PRINTSERVER) exit [ProgressCopyENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT is not correctly installed. Are you sure you want "+ "to cancel copying files?" ProCancelCap = "Setup Message" ProText1 = "Copying:" ProText2 = "To:" [ExternalInstallOption] Set !G:DebugOutputControl = 0 set Exit_Code = $(!SETUP_ERROR_GENERAL) set DrivesToFree = {} install LoadSetupLibrary ifstr(i) $(STF_LANGUAGE) == "" goto end else-ifstr(i) $(OPTION) == "" goto end else-ifstr(i) $(ADDCOPY) == "" goto end else-ifstr(i) $(DOCOPY) == "" goto end else-ifstr(i) $(DOCONFIG) == "" goto end endif read-syms UiVars detect UiVars read-syms ProductType read-syms Strings$(STF_LANGUAGE) ifstr(i) $(STF_PLATFORM) == $(PlatformID_I386) set STF_PRNPLATFORM = "w32x86" else-ifstr(i) $(STF_PLATFORM) == $(PlatformID_Mips) set STF_PRNPLATFORM = "w32mips" else goto end endif set STF_SRCDIR = A:\NTDRIVER\ shell "registry.inf" GetNTSource ifint $($ShellCode) != $(!SHELL_CODE_OK) else-ifstr(i) $($R0) != STATUS_SUCCESSFUL else set STF_SRCDIR = $($R1) endif shell "subroutn.inf" DoAskSource $(STF_SRCDIR) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "shelling DoAskSource failed" goto end endif ifstr(i) $($R0) == STATUS_SUCCESSFUL set STF_SRCDIR = $($R1) ifstr(i) $($R2) != "" set DrivesToFree = >($(DrivesToFree), $($R2)) endif else goto end endif LibraryProcedure IsFullPath, $(!LIBHANDLE), CheckPathFullPathSpec $(STF_PRNDRIVERPATH) ifstr(i) $(IsFullPath) == "NO" LibraryProcedure STATUS, $(!LIBHANDLE), ProcessForUNC $(STF_PRNDRIVERPATH) ifstr(i) $(STATUS) == "ERROR" shell "" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String3) goto end else-ifstr(i) $(STATUS) == "NOT-UNC" shell "" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String3) goto end else-ifstr(i) $(STATUS) == "UNC-NOFREEDRIVE" shell "" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String3) goto end else-ifstr(i) $(STATUS) == "UNC-FAILCONNECT" shell "" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String3) goto end else set STF_PRNDRIVERPATH = $(STATUS) GetDriveInPath Drive $(STF_PRNDRIVERPATH) set DrivesToFree = >($(DrivesToFree), $(Drive)) endif endif shell "" InstallOption $(STF_LANGUAGE) $(OPTION) $(STF_SRCDIR) $(ADDCOPY) $(DOCOPY) $(DOCONFIG) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Execing InstallOption failed" goto end endif ifstr(i) $($R0) == STATUS_SUCCESSFUL set Exit_Code = $(!SETUP_ERROR_SUCCESS) else-ifstr(i) $($R0) == STATUS_USERCANCEL set Exit_Code = $(!SETUP_ERROR_USERCANCEL) endif end =+ ForListDo $(DrivesToFree) LibraryProcedure STATUS,$(!LIBHANDLE), DeleteNetConnection $($) "TRUE" EndForListDo install FreeSetupLibrary exit [LoadSetupLibrary] LoadLibrary "x" $(!STF_CWDDIR)setupdll.dll !LIBHANDLE exit [FreeSetupLibrary] FreeLibrary $(!LIBHANDLE) exit [UiVars] PlatformID_I386 = I386 PlatformID_Mips = Mips STF_CONTROLSET = CurrentControlSet STF_WINDOWSPATH = "" ? $(!LIBHANDLE) GetWindowsNtDir STF_WINDOWSSYSPATH = "" ? $(!LIBHANDLE) GetWindowsNtSysDir STF_PRNDRIVERPATH = "" ? $(!LIBHANDLE) GetPrinterDriverDir $(!STF_PRINTSERVER) [Source Media Descriptions] 1 = "SEIKO Precision Printer Driver Disk" , TAGFILE = disk1 [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-PrinterConfig] rasddui = 1,rasddui.dll , SIZE=999 [Files-PrinterData] bp9000 = 1,bp9000.dll , SIZE=999 fb840 = 1,fb840.dll, SIZE=999 [Files-PrinterDriver] rasdd = 1,rasdd.dll , SIZE=999Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.