Smart Link PegasUSB Version 2.75 - January 11, 2000 ==================================================== Bug Fixes ---------- 1652 Wrong software version reported in Settings property page 1651 The first country in the list is VersionID 1647 Focus disappears from HyperTerminal window when issuing the first character 1527 The carrier detect CD LED not functioning after the first connection in HT Improvements/Changes/Requirements --------------------------------- 1670 Dial Tone Detection Filters Shaping 1611 Enable separate receive gain setting for call progress Smart Link PegasUSB Version 2.70D - December 8, 1999 ==================================================== Bug Fixes ---------- 1606 Delay before dialing in Singapore 1567 Change COM port does not work properly (now it's disabled) 1528 Blind dialing-busy detection must be disabled until first digit is dialed 1526 Auto country selection problem on Chinese Windows set to UK 1519 Hook flash parameters changes for New Zeland: Hook.FlashTime 9 => 70 1518 Ring parameters changes for Australia: RingCadence.OffTime 35 => 19 RingCount.DelayBeforeResetting => 19 1481 Country selection under Win2K does not work at first attempt 1463 Win2K uninstall problem on some multi-boot systems 1454 SLCustom doesn't respond when INF read-only 1452 CID does not work properly under Quick Link 1446 Problem with "AT+FRH=3" command 1441 Problem when tx fax under Bitware 1438 WOR does not work & Power Management problems on Macao under Win2K 1409 SLLights Advanced Tab->Modulation field should only show initial modulation 1378 Problem to send and receive faxes in Chile, behind Nortel PBX 1311 Dialtone detection failures in some of CTR21 advisory notes 1239 Pulse dialing in Sweden does not work properly Improvements/Changes/Requirements --------------------------------- 1551 New AT command (AT&A7) for TX rate notification 1535 Improved connect rates over ISDN line in Japan 1530 V.90 connectivity improvments 1516 New CallingTone.Flag value (temporary enable) 1512 WDM Support 1503 Customizable country fallback when OS country has no match 1502 Country selection and property pages moved to a Control Panel applet 1496 Removed "Troubleshooting" button from property page 1491 Automatic country selection during installation under Win2K 1482 PTTWizard should not work on a newer driver version 1474 Catalog File (.cat) added 1465 Hardware details displayed in a hidden property page in Control Panel 1455 V.90 connectivity improvements 1447 V.90 connectivity improvements 1427 Added "Apply for all countries" capability to PTTWizard 1393 PTTWizard remembers the last directory an INF file was Smart Link PegasUSB Version 2.60 - August 20, 1999 ================================================== Bug Fixes ---------- 1360 Fixed ring detection parameters for Malaysia 1329 Fixed a bug when restarting Windows98SE from DOS mode 1323 Fixed a bug with blacklisting 1318 Dial tone detection problem on specific PBX in Taiwan 1284 Problem with multi format fax pages 1283 Fax software blocked when removing phone line during connecting 1273 Disabling SLLights from SLCustom does not work properly 1269 Ring detection problem in UK 1268 Black screen after modem connects with multiplayers games 1266 DTR behavior not according to AT&Dn setting 1248 Tone/Pulse dialing is reversed in Holland 1241 Dial and Busy tone detection problems in Holland and Belgium 1223 Automatic country selection does not detect UK 1178 Dial tone not detected on German ISDN PBX Improvements/Changes/Requirements --------------------------------- 1362 S45 does not accept values between 128-247 1354 Various V.90 enhancments 1348 Dialtone detector sensitivity improved 1340 COM port selection option removed from property page 1338 PTTWizard parameters changed for Australia and NZ 1337 Czech/Slovak, Poland and Hungary country profiles added 1332 Improved wake-up on ring support 1326 Chile & Argentina country profiles added 1325 Japanese translation of SLLights 1323 BLACKLISTED and DELAYED now reported also in ATX3 mode 1322 Changed default country from USA to AUTO 1320 Changed call progress parameters for Australia and New Zealand 1317 New AT commands for PC99 (v.25ter protocol) 1314 Local language support added to SLLights 1298 Improved connectivity over ISDN PBX equipment 1291 Enable OEM to disable/enable K56Flex in the installation 1288 Ring detection frequency range expanded for all countries 1285 Changed DTMF and blacklisting parameters for Japan 1281 Changed blacklisting settings for Singapore 1259 Increased ring detector sensitivity in all countries except Japan 1253 Country selection option under WinNT4/5 added 967 CPU consumption improved Smart Link PegasUSB Version 2.50A - June 21, 1999 ================================================= Bug Fixes ---------- 1230 Ring detection problem in France 1211 Occasional error message upon port open 1195 Ring detection problem with USA DAA chip 1191 Improved V.34 interoperability in answer mode 1165 V.23 Loses connection during MINITEL session 1150 Ring is not identified in Hong-Kong 1109 Modem does not disconnet when phone line is pulled out Improvements/Changes/Requirements --------------------------------- 1227 Optimizations for 3012 chip 1218 Overall V.90 connectivity improvements 1185 Added profiles for Luxembourg, Greece, Iceland and Hungary 1170 Control over FAX tx level added for Japan PTT approval 1168 V.32 supports S10 (*100ms) disconnect time 1167 Improved interoperability with Connexant modems 1166 Calling tone disabled as default 1152 Support for Handset Exclusion option 1151 Adjusted european countries' parameters to CTR21 standard 1148 Supports AUTO country configuration 1141 Optimizations for Pentium3 processors 1131 V.34 Ineroperability improvements 1095 Improved V.90 connections over ISDN PBX equipment 1079 Improvement of Ring detection in Australia 1061 Improved interoperability with Brother IntelliFax machines 918 V.90 Connectivity improvements for Korea 804 V.90 Connectivity improvements for long distance calls Smart Link PegasUSB Version 2.40 - April 26, 1999 ================================================ Bug Fixes ---------- 1095 ISDN lines do not connect V.90 1094 Ring detection does not work on Intel 1089 Ring is not identified in Japan 1079 Ring is not identified in Australia 1057 Correct indication when line not connected 1031 Uninstall doesn't delete all .inf files in %WINDIR%\INF\ 994 Country setting not saved with SLCustom application Improvements/Changes/Requirements --------------------------------- 1093 V.34 performance improvements 1082 V.90 optimizations for low power CPUs 1056 Prevent using / in Product Name string 1052 Fix AT%T V.27signal by -6dB 1051 Modem disconnects 1-3 secs after the remote modem disconnects 1035 V.34 supports 2400 bps 1026 Calling tone (^) support added 1023 Change MODIO to a customer modifiable field in Uninstall Dialog BoxDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.