Installation PNP Modem for Windows 95
1.) Remove jumpers of JP1 and JP2 for PNP mode.
2.) Turn on the PLUG AND PLAY feature on your system BIOS for initializing
the PNP device.
3.) The "CARD-xx Texas Instruments Inc. Tut 33.6 FAX Inte" will bw shown on
your screen when system boot up with InterCOM_Net internal modem.
4.) The "Texas Instruments Inc. TUT 33.6 fax internal" message will be shown
on your screen when you boot up Windows 95 with InterCOM_Net internal
modem in first time.
5.) Select the option
* Driver from disk provided by hardware manufacturer.
6.) Put your driver diskette onto disk A: or B: and click "OK"
7.) After enter Window 95 click "My Computer" icon
Select "Control Panel" icon
Select "Modems" icon
Under Modems Properties it will show
"InterCOM_Net 33600bps Internal MODEM V.34+"
8) The PNP modem setup are completed now. Enjoy using your DATA/FAX
application.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.