;*********************************************************************** ; ; ; Relia Family network card and driver SETUP INF file. ; ; History: ;*********************************************************************** [Identification] OptionType = NetAdapter [PlatformsSupported] ISA EISA "Jazz-Internal Bus" [Options] GM2452 ;*********************************************************************** ; CONSTANTS FOR USING DIALOGS ;*********************************************************************** [FileConstants] GenericInfVersion = "v1.0" GenericAdapterName = "RELIABLE COMBO-L/M-56K Modem Combo PC Card" GenericDriverName = "RELIABLE COMBO-L/M-56K Modem NDIS Driver" GenericFunctionName = "PCMCIA Combo PC Card" GenericSysName = "56KCOMNT.SYS" GenericName = "GM2452" ; ; File names, etc. ; UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "Microsoft" ProductMajorVersion = "3" ProductMinorVersion = "1" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "GM2452" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName) NetRuleSoftwareType = "GM2452Sys ndisDriver GM2452Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """GM2452Sys"" yes no container" NetRuleSoftwareClass = {"GM2452Driver basic"} NetRuleSoftwareBindable = {"GM2452Driver GM2452Adapter non exclusive 100"} ProductHardwareName = "GM2452" NetRuleHardwareType = "GM2452 GM2452Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"GM2452Adapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] ; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour, ; Minute, Second } Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] ; ; read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) set STF_DISPLAYDEBUGOUTPUT = 1 ; +++ 10/24/95 tammie Return $(Status) $(Identifier) $(Media) $(STF_DISPLAYDEBUGOUTPUT) [ReturnOptions] ; ; set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ; ; Check if the platforms requested is supported ; ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif ; ; form a list of all the options and another of the text representing ; returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] ; ; Set default values for ; set Status = STATUS_FAILED ; ; extract parameters ; set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin ; ; Assume all is well. ; set CommonStatus = STATUS_SUCCESSFUL EndWait ; ; Set up the operation-mode-based variables and gaily welcome ; the user. If the "install mode" variable is improperly set, ; assume this is a new installation. ; Begin = + Set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure ; set ActivateDetection = TRUE set StartLabel = configureadapter ; ; You cannot config the software component ; Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else ; set ActivateDetection = TRUE set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif ; set the default values ; IRQ Level = 5 set IRQValue = *($(IRQList), 1) ; IOBase Address = 0x300 set IOBaseAddrValue = *($(IOBaseAddrList), 1) ; Memory Address = 0xd8000 set MemAddrValue = *($(MemAddrList), 2) ; Slot Number = 0 set SlotValue = *($(SlotList), 1) ; ++ Willy ; COM Port = 2 set ComPortValue = *($(ComPortList), 1) set ModemIOBaseAddressValue = *($(ModemIOBaseAddressList), 2) ; 0x2f8 set ModemInterruptNumberValue = *($(ModemInterruptList), 2) ; 0x3 Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) ;----------------------------------------------- ; Installation Section ;----------------------------------------------- installadapter = + ; ; First, check whether the same version of the software exists ; OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) ; ; Same version already existed in the local machine ; Popup the dialog and ask the user whether he wants to continue ; CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) ; ; Cannot Install the same software again ; Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else ; ; Add a new adapter card? ; Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" goto end endif set OldVersionExisted = $(TRUE) endif endif ; ; dll load addition ; Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) install "Install-Dll" goto adaptersetup ;----------------------------------------------- ; Configuration Section ;----------------------------------------------- ; ; Get the current values of all the parameters ; configureadapter = + Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif ; ; Get the other parameters; they're attached to the service parameters key ; Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif Set KeyParameters = $($R2) ; ; We don't need the services key, so close it. ; CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} ; ; Get the old values ; EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) ifstr(i) $(ValueName) == "IoBaseAddress" set IOBaseAddrIndex = $(ValueData) else-ifstr(i) $(ValueName) == "InterruptNumber" set IRQValueIndex = $(ValueData) else-ifstr(i) $(ValueName) == "BaseMemory" set MemAddrIndex = $(ValueData) else-ifstr(i) $(ValueName) == "Slot" set SlotValueIndex = $(ValueData) else-ifstr(i) $(ValueName) == "ComPort" set ComPortValueIndex = $(ValueData) endif EndForListDo set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex))) ifstr(i) $(IRQValue) == "" set IRQValue = *($(IRQList), 1) endif Debug-Output $(InfName)" IRQ_Level is "$(IRQValue) set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex))) ifstr(i) $(IOBaseAddrValue) == "" set IOBaseAddrValue = *($(IOBaseAddrList), 1) endif Debug-Output $(InfName)" I/o base is "$(IOBaseAddrValue) set MemAddrValue = *($(MemAddrList), ~($(MemAddrValues),$(MemAddrIndex))) ifstr(i) $(MemAddrValue) == "" set MemAddrValue = *($(MemAddrList), 1) endif Debug-Output $(InfName)" Mem base is "$(MemAddrValue) set SlotValue = *($(SlotList), ~($(SlotValues),$(SlotValueIndex))) ifstr(i) $(SlotValue) == "" set SlotValue = *($(SlotList), 1) endif Debug-Output $(InfName)" Slot Number is "$(SlotValue) set ComPortValue = *($(ComPortList), ~($(ComPortValues),$(ComPortValueIndex))) ifstr(i) $(ComPortValue) == "" set ComPortValue = *($(ComPortList), 1) endif Debug-Output $(InfName)" Com Port Number is "$(ComPortValue) ; ++ Willy, 4/10/'97 set ModemIOBaseAddressValue = *($(ModemIOBaseAddressList), ~($(CompPortValues),$(ComPortValueIndex))) ifstr(i) $(ModemIOBaseAddressValue) == "" set ModemIOBaseAddressValue = *($(ModemIOBaseAddressList), 2) endif Debug-Output $(InfName)" Com Port Number is "$(ModemIOBaseAddressValue) set ModemInterruptNumberValue = *($(ModemInterruptList), ~($(CompPortValues),$(ComPortValueIndex))) ifstr(i) $(ModemInterruptNumberValue) == "" set ModemInterruptNumberValue = *($(ModemInterruptList), 2) endif Debug-Output $(InfName)" Com Port Intertupt is "$(ModemInterruptNumberValue) ; -- Willy ; Save the settings as they were read from the Registry. ; Shell $(ParamInf) Param_SaveValues ; Set CurrParamSettings = $($R0) ; ; Put up the adapter configuration dialog if necessary. ; ; Note that $(CurrParamSettings) has the old known parameter values. ; adaptersetup = + ; Shell "" DebugConfiguration "before displaying dialog" Set from = adapteroptions adapteroptions = + LoadLibrary "Disk 1" $(DialogDllName) hLib read-syms FileDependentDlg$(!STF_LANGUAGE) Debug-Output $(InfName)" I/o base is "$(IOBaseAddrValue) ui start "InputDlg" $(hLib) set ExitButton = $(ButtonPressed) Debug-Output " ButtonPressed "$(ButtonPressed) FreeLibrary $(hLib) ifstr(i) $(DLGEVENT) == "CONTINUE" set IOBaseAddrIndex = $(Combo1Out) set IRQValueIndex = $(Combo2Out) set MemAddrIndex = $(Combo3Out) set SlotValueIndex = $(Combo4Out) set ComPortValueIndex = $(Combo5Out) set ExitButton = $(ButtonPressed) ui pop 1 else-ifstr(i) $(DLGEVENT) == "EXIT" set CommonStatus = STATUS_USERCANCEL Debug-Output "Action: exit. Bye." ui pop 1 goto end else ; ; Unknow command ; ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif Debug-Output " Combo list out "$(ComboListItemsOut) ; ; If installing, go create the necessary keys; ; if configuring, they're already open. ; skipoptions =+ ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ; ; Add Software Component ; ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif ; ; At this point: ; $R1 contains the product version key handle; ; $R2 contains the NetRules subkey handle; ; $R3 contains the new Services key handle; and ; $R4 contains the Parameters key ; $R5 contains the Linkage Key ; set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif endif ; ; Create the HARDWARE\Netcard region and its corresponding service ; Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters ; ; REQUIRED: $(KeyParameters) contains service Parameters key handle ; writeparameters = + Shell $(UtilityInf), GetBusTypeNum set BusTypeNum = $($R1) ; Testing the BusNum. We are coding it to 0 set BusNumValue = 0 ; ; End of BusNum ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex))) set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrIndex))) set MemAddrValue = *($(MemAddrValues), ~($(MemAddrList),$(MemAddrIndex))) set SlotValue = *($(SlotValues), ~($(SlotList),$(SlotValueIndex))) set ComPortValue = *($(ComPortValues), ~($(ComPortList),$(ComPortValueIndex))) ; ++ Willy set ModemIOBaseAddressValue = *($(ModemIOBaseAddressValues), ~($(ComPortList),$(ComPortValueIndex))) set ModemInterruptNumberValue = *($(ModemInterruptValues), ~($(ComPortList),$(ComPortValueIndex))) ; -- Willy set NewValueList = {{IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {BusNumber, $(NoTitle),$(!REG_VT_DWORD),$(BusNumValue)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+ {BaseMemory, $(NoTitle),$(!REG_VT_DWORD),$(MemAddrValue)},+ {Slot, $(NoTitle),$(!REG_VT_DWORD),$(SlotValue)},+ {ModemIOBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(ModemIOBaseAddressValue)},+ {ModemInterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(ModemInterruptNumberValue)},+ {ComPort, $(NoTitle),$(!REG_VT_DWORD),$(ComPortValue)}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) CloseRegKey $(KeyParameters) ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ++ Willy, 4/10/'97 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters\SerialPCMCIALM56" $(MAXIMUM_ALLOWED) MyNewSerialHandle Ifstr $(MyNewSerialHandle) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) SerialKey CreateRegKey $(SerialKey) {"SerialPCMCIALM56",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyNewSerialHandle CloseRegKey $(SerialKey) endif set NewValueList = {{DosDevices, $(NoTitle),$(!REG_VT_SZ), "COM"$(ComPortValue)},+ ; "COMx" {ForceFifoEnable, $(NoTitle), $(!REG_VT_DWORD), 0},+ ; Always false {Interrupt, $(NoTitle), $(!REG_VT_DWORD), $(ModemInterruptNumberValue)},+ ; Interrupt for PCMCIALM Modem {PortAddress, $(NoTitle),$(!REG_VT_DWORD), $(ModemIOBaseAddressValue)}} ; I/O Base address for PCMCIALM Modem Shell $(UtilityInf), AddValueList, $(MyNewSerialHandle), $(NewValueList) Debug-Output "<DBG> AddValueList - DosDevices, ForceFifiEnable,..." CloseRegKey $(MyNewSerialHandle) OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP\SERIALCOMM" $(MAXIMUM_ALLOWED) MyNewSerialHandle Ifstr $(MyNewSerialHandle) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP" $(MAXIMUM_ALLOWED) SerialKey CreateRegKey $(SerialKey) {"SERIALCOMM",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyNewSerialHandle CloseRegKey $(SerialKey) endif SetRegValue $(MyNewSerialHandle) {"SerialPCMCIALM56",$(NoTitle),$(!REG_VT_SZ),"COM"$(ComPortValue)} CloseRegKey $(MyNewSerialHandle) OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\Ports" $(MAXIMUM_ALLOWED) MyNewSerialHandle Ifstr $(MyNewSerialHandle) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(MAXIMUM_ALLOWED) SerialKey CreateRegKey $(SerialKey) {"Ports",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyNewSerialHandle CloseRegKey $(SerialKey) endif SetRegValue $(MyNewSerialHandle) {"COM"$(ComPortValue)":",$(NoTitle),$(!REG_VT_SZ), "9600,n,8,1"} CloseRegKey $(MyNewSerialHandle) ; -- Willy, ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif ;;//++added by jinchih to solve the X mark on the PCMCIA controller icon. set PCMCIADatabaseKeyName = $(!NTN_ServiceBase)"\Pcmcia\DataBase" Debug-Output "INF: Opening PCMICA database key "$(PCMCIADatabaseKeyName) OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseKeyName) $(MAXIMUM_ALLOWED) PCMCIADatabaseKey Ifstr $(PCMCIADatabaseKey) == $(NULL) Debug-Output "INF: Pcmcia\DataBase not present" else OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseKeyName)"\RELIABLE" $(MAXIMUM_ALLOWED) PCMCIADatabaseRELIABLEKey Ifstr $(PCMCIADatabaseRELIABLEKey) != $(NULL) CloseRegKey $(PCMCIADatabaseRELIABLEKey) DeleteRegTree $(PCMCIADatabaseKey) "RELIABLE" Endif CreateRegKey $(PCMCIADatabaseKey) {"RELIABLE", 0, 0} "" $(MAXIMUM_ALLOWED) "" PCMCIADatabaseRELIABLEKey CreateRegKey $(PCMCIADatabaseRELIABLEKey) {"COMBO-L/M-56K", 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseEthernetKey SetRegValue $(PCMCIADatabaseEthernetKey) {AttributeMemorySize, 0, $(!REG_VT_DWORD),4096} SetRegValue $(PCMCIADatabaseEthernetKey) {DeviceType, 0, $(!REG_VT_SZ),"NET"} SetRegValue $(PCMCIADatabaseEthernetKey) {CardMemorySize, 0, $(!REG_VT_DWORD),0} SetRegValue $(PCMCIADatabaseEthernetKey) {InfFileName, 0, $(!REG_VT_SZ),""} SetRegValue $(PCMCIADatabaseEthernetKey) {Option, 0, $(!REG_VT_SZ),"GM2452"} CloseRegKey $(PCMCIADatabaseEthernetKey) CloseRegKey $(PCMCIADatabaseRELIABLEKey) CloseRegKey $(PCMCIADatabaseKey) endif ;;//-- added by jinchih EndWait goto successful ;----------------------------------------------- ; Binding section ;----------------------------------------------- bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal ;----------------------------------------------- ; Removeadapter section ;----------------------------------------------- removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) ; Remove Software Component Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end ;----------------------------------------------- ; Upgrade Software section ;----------------------------------------------- UpgradeSoftware = + ; ; First determine whether we want to do upgrade or update for software ; or hardware component. Then we will determine whether the Mode is ; update or upgrade. ; ; If the same version of the product existed in the registry, we do ; update. Otherwise, we will do a upgrade ; ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) ; Upgrade software component ; ; see whether the same version exist or not ; OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) GetRegValue $(KeyProduct),"MajorVersion", VersionInfo set Version = *($(VersionInfo), 4) ; ; Update the binaries ; Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) ifstr(i) $(!UG_Filename) != "" install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif endif ; Upgrade the version number ; SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} ; ; do nothing for update ; ifint $(Version) != $(ProductVersion) ; ; If the major version number is not the same, ; it is major upgrade. So let Upgrade the product ; ; ; make other upgrade change if necessary ; endif CloseRegKey $(KeyProduct) else ; ; Cannot Open software key, goto ERROR ; goto fatalregistry endif else ; ; upgrade/update hardware component ; There is no different between upgrade and update for hardware ; component ; ; 1. Get the Service Name ; 2. Change the NetRule section if necessary ; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) + $(MAXIMUM_ALLOWED) NetworkCardKey Ifstr(i) $(NetworkCardKey) != $(KeyNull) ; ; Get Service name ; GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo set ServiceName = *($(ServiceNameInfo), 4) ; ; Change the NetRule if necessary ; OpenRegKey $(NetworkCardKey) "" "NetRules" + $(MAXIMUM_ALLOWED) NetRuleKey Ifstr(i) $(NetRuleKey) != $(KeyNull) ; ; Make the change.... ; else ; ; Error, cannot open net rules key ; goto fatalregistry endif CloseRegKey $(NetRules) CloseRegKey $(NetworkCardKey) else ; ; Error, cannot open network card key ; goto fatalregistry endif ; ; 3. Change the service section of the hardware. i.e., ; ParameterName change, value change, etc. ; OpenRegKey $(!REG_H_LOCAL) "" + $(!NTN_ServiceBase)"\"$(ServiceName) + $(MAXIMUM_ALLOWED) ServiceKey Ifstr(i) $(ServiceKey) != $(KeyNull) ; ; Get the ServiceKey to change the Start value ; or Type value. Or open Parameters key to ; change the hardware parameters if necessary. ; CloseRegKey $(ServiceKey) else ; ; Error, cannot open network card key ; goto fatalregistry endif endif goto end ; ; End of Upgrade Software ; ; ; Escape hatches ; successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE ; Remove Software Component Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end ; ; warning display ; warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif ; ; non fatal error display ; nonfatalinfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif ; ; Registry is broken ; fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal ; ; Netcard detection failure ; fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal ; ; fatal error display ; fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ; ; Shelling error ; ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ; ; if OEM_ABANDON_ON == TRUE, then remove the registry entries ; ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [DebugConfiguration] Set InfName = "inf" Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0) Debug-Output $(InfName)" IRQ_Level is "$(!p:IRQValue) Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue) Debug-Output $(InfName)" MemAddrValue is "$(!p:MemAddrValue) Debug-Output $(InfName)" SlotNumber is "$(!p:SlotValue) Debug-Output $(InfName)" ComPortNumber is "$(!p:ComPortValue) Debug-Output $(InfName)" TransceiverValue is "$(!p:TransceiverValue) Debug-Output $(InfName)" MemBaseAddrDec is "$(!p:MemBaseAddrDec) Debug-Output $(InfName)" MappedValue is "$(!p:MappedValue) return ;*************************************************************** ; INSTALL SECTIONS ;*************************************************************** [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" ; ; Add the files to the copy list ; ; BUGBUG: eliminate the "nt2" in the next line when Sunil fixes ; the other INF files ; AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" ; ; Copy files in the copy list ; set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" ;set STF_VERSION = "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-Dll] set STF_VITAL = "" AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Source Media Descriptions] 1 = "GM2452 Driver Disk" , TAGFILE = disk1 [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 1, oemsetup.inf, SIZE=2000, RENAME=$(!UG_Filename) [Files-GM2452] 1, 56KCOMNT.SYS , SIZE=88888 [Files-Dll] 1, 56KCOMNT.dll, SIZE=999 [LanguagesSupported] ENG [OptionsTextENG] GM2452 = "PCMCIA COMBO-L/M-56K Modem Combo PC Card" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" FunctionTitle = $(GenericFunctionName)" Setup" ProductSoftwareDescription = $(GenericDriverName) ProductHardwareDescription = $(GenericAdapterName) ProductHardwareGM2452Description="PCMCIA COMBO-L/M-56K Modem Combo PC Card" ProductSoftwareTitle = $(GenericDriverName) ProductHardwareGM2452Title = $(GenericAdapterName) DialogDllName = "56KCOMNT.dll" IRQList = ^(IRQChoices, 1) IRQValues = ^(IRQChoices, 2) IOBaseAddrList = ^(IOBaseAddrChoices, 1) IOBaseAddrValues = ^(IOBaseAddrChoices, 2) MemAddrList = ^(MemAddrChoices, 1) MemAddrValues = ^(MemAddrChoices, 2) SlotList = ^(SlotChoices, 1) SlotValues = ^(SlotChoices, 2) ComPortList = ^(ComPortChoices, 1) ComPortValues = ^(ComPortChoices, 2) ; ++ Willy, 4/11/'97 ModemIOBaseAddressList = ^(ModemIOBaseAddressChoices, 1) ModemIOBaseAddressValues = ^(ModemIOBaseAddressChoices, 2) ModemInterruptList = ^(ModemInterruptChoices, 1) ModemInterruptValues = ^(ModemInterruptChoices, 2) [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [MemoryMappedChoicesENG] Map_1 = 1, "ON" Map_2 = 0, "OFF" [FileDependentDlgENG] DlgText = "Please select values for the follwing fields:" DlgType = "RadioCombination" DlgTemplate = "Relia" Caption = $(FunctionTitle) CBOptionsGreyed = {} NotifyFields = {NO, NO} Combo1Label = "I/O &Base:" Combo2Label = "&Interrupt:" Combo3Label = "&Memory:" Combo4Label = "&Socket Number:" Combo5Label = "&COM Port:" Combo1List = $(IOBaseAddrList) Combo1Out = $(IOBaseAddrValue) Combo2List = $(IRQList) Combo2Out = $(IRQValue) Combo3List = $(MemAddrList) Combo3Out = $(MemAddrValue) Combo4List = $(SlotList) Combo4Out = $(SlotValue) Combo5List = $(ComPortList) Combo5Out = $(ComPortValue) ComboListItemsIn = {Combo1List,Combo2List,Combo3List,Combo4List,Combo5List} ComboListItemsOut = {Combo1Out,Combo2Out,Combo3Out,Combo4Out,Combo5Out} EditTextIn = "" EditTextLim = "" [IRQChoices] IRQ_1 = "5",5 IRQ_2 = "7",7 IRQ_3 = "9",9 IRQ_4 = "10",10 IRQ_5 = "11",11 IRQ_6 = "12",12 IRQ_7 = "15",15 [IOBaseAddrChoices] IOBase_1 = "0x300",768 IOBase_2 = "0x320",800 IOBase_3 = "0x340",832 IOBase_4 = "0x360",864 [MemAddrChoices] Memory_1 = "0xDC00",56320 Memory_2 = "0xD800",55296 Memory_3 = "0xD400",54272 Memory_4 = "0xD000",53248 Memory_5 = "0xCC00",52224 Memory_6 = "0xC800",51200 Memory_7 = "0xC400",50176 Memory_8 = "0xC000",49152 [SlotChoices] Slot_1 = "0",0 Slot_2 = "1",1 Slot_3 = "2",1 Slot_4 = "3",1 [ComPortChoices] ComPort_1 = "2",2 ComPort_2 = "3",3 ComPort_3 = "4",4 ; ++ Willy, 4/14/'97 [ModemInterruptChoices] ;MdmIRQ_1 = "4", 4 MdmIRQ_1 = "3", 3 MdmIRQ_2 = "4", 4 MdmIRQ_3 = "3", 3 ; ++ Willy, 4/10/'97 [ModemIOBaseAddressChoices] ;MdmIOBase_1 = "0x3F8",1016 MdmIOBase_1 = "0x2F8",760 MdmIOBase_2 = "0x3E8",1000 MdmIOBase_3 = "0x2E8",744Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.