Installing the PCMCIA LAN+56K Modem PC Card driver
Under LAN MANAGER 2.x for DOS
========================================================
The NDIS2 driver for DOS program compiles with Microsoft's NDIS specification,
version v2.0.1
The PCMCIA LAN+56K Modem PC Card driver files for MS LAN Manager
contained in this directory are as follows:
Directory/Files Contents
----------------------------------- ---------------------------------------
README.TXT This file.
DRIVERS\ETHERNET\COMND\COMND.DOS NDIS driver for DOS.
DRIVERS\ETHERNET\COMND\PROTOCOL.INI Includes driver binding information
and operational parameters.
DRIVERS\NIF\COMND.NIF Network information file for install.
For more information about setting up the networking system and the driver,
please see you LAN Manager Installation and Configuration Guide.
**********************************
* Installation Procedure Steps *
**********************************
1. MS LAN Manager provides a SETUP.EXE program on the Setup disk. Execute
this SETUP program to specify the proper driver.
- If you are installing LAN Manager for the first time, run the SETUP
program to install LAN Manager. Near the end of the installation, you
will be asked select available network adapter drivers. Please select
"Other Driver" button.
- If you have already installed LAN Manager, run the SETUP program, and
go to "Configuration => Network Drivers => Add New Config => Other
Drivers" button.
2. Insert this diskette into drive 'A' and set the new path as A:\. The SETUP
program will copy the necessary NDIS driver programs to your \MSLANMAN.DOS
directory.
3. After completion of the SETUP, it will modify your CONFIG.SYS, AUTOEXEC.BAT,
and PROTOCOL.INI files.
4. After completion of the SETUP, you should modify the PROTOCOL.INI file to
specify the INTERRUPT number and the IOBASE number which must be equal to
the /IRQ and /IO parameters specified to the enabler program.
5. Reboot your computer.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.