DRIVERS USAGE EXPLAINATION ========================== With this subdirectory of ShineNet utility diskette,you will find the following files: 8634SH.OBJ A8634.OBJ B8634.OBJ C8634.OBJ D8634.OBJ 8634.LAN S8634.LAN NBE634.EXE README FTP_TCP <DIR> V3.1X <DIR> DOSODI <DIR> PCNFS <DIR> The files 8634SH.OBJ.....S8634.LAN are provided for Novell NetWare ver 2.1X and later. Please refer to the ShineNet user manuals and NOVELL NetWare installation manual for details during installation. The files in directory V3.1X support for Netware 386 ver 3.10 and 3.11, please read this file about more information and refer to NetWare installation manual for details during installation. Except for using the driver of ShineNet LCS-8634L, you can also use the NE2000 as lan driver if you are the user of NOVELL Netware ver 2.1X or later version. NBE634.EXE is NETBIOS emulator; You will need it if you intend to use the PC LAN or LAN MANAGER. The files in FTP_TCP <dir> are Shine Net LAN adapter packet drivers for FTP's PC/TCP network softwares. The readme file under the FTP_TCP <dir> will direct you the installation details. The files in DOSODI <dir> are drivers supporting NOVELL ODI specification. If there is any conflict existing between the user manual and readme files,the readme files shall prevail. NetWare 386 DRIVERS USAGE EXPLAINATION ====================================== I. For install your NOVELL Netware 386 on your server : Please insert your Netware 386 Disk "SYSTEM-1", enter command A:SERVER Until you get the ":" server console prompt, then insert the DISK include the "INSTALL" NLM module and enter LOAD d:INSTALL for execute install procedure. Please refer to NOVELL NetWare 386 Installation Manual for details. II. Procedure for Load Driver: Directory V3.1X contains LCS8634.LAN, an NLM module for installing NetWare 386 version 3.1X file servers, It can also be running on Netware V3.10 and V3.11. Follow the 386 NetWare installation procedure until you get the ":" server console prompt. Enter commands listed below at the prompt to install LAN driver into your server: LOAD d:LCS8634.LAN <CR> BIND IPX TO LCS8634 <CR> The drive letter d: is the physical location where "LCS8634.LAN" is placed. You will be prompted to select the proper LAN card configuration after the program is loaded. If you want unload the driver from server, please enter : UNLOAD LCS8634.LAN More clear operation for Netware 386, please refer to your Netware 386 manual. III. Generate WorkStation Driver on your Netware 386 : S8634.LAN and 8634SH.OBJ files can also be used to create NetWare 386 version 3.x shell without any modification. Please copy the file "8634SH.LAN" in this disk, into the Disk "SHGEN-1" of Netware V3.10, or into the Disk "WSGEN" of Netware V3.11 . Then execute the file SHGEN <CR> (for Netware v3.10) or WSGEN <CR> (for Netware v3.11) You will be prompted to insert this diskette (LAN_DRV_243) during create for linking object file 8634SH.OBJ . Please refer to NOVELL NetWare 386 Installation Manual for details about your WorkStation installation. * NetWare is a registered trademark of Novell Inc.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.