t ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ODI Driver User Guide ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ NOTE: The new version LCS8634.COM is an IRQ, IOBase auto-detect driver Contents: 1. Introduce the Open Data-Link Interface .. 1.1. Multiple Link Interface Driver (MLID) .... 1.2. Protocol Stack ........................... 1.3. Link Support Layer (LSL) ................. 1.4. Benefits of use ODI MLID .................. 2. ShineNET ODI MLID ........................ 2.1. Network Configuration file NET.CFG ....... 2.2. Keywords of NET.CFG ...................... 2.3. Executing ODI MLID ....................... 1. Introduce the Open Data-Link Interface : Open Data-Link Interface (ODI), a specification jointly designed by Novell and Apple, allows many communication protocols to co-exist on the same physical network. Figure 1.1 shows two different commun- ication protocols sharing the same media. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Dos Service Function ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄ¿ ÚÄÄÄÄÄ¿ ³ Protocol ³ Protocol ³ ³ ³ ³ ................. ³ Stack 0 ³ Stack 1 ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Link Support Layer ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄ¿ ÚÄÄÄÄÄ¿ ³ ³ ³ ³ ³ MILD 0 ³ MILD 1 ................ ³ NE1000 ³ Ne2000 ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ LAN Board 1 LAN Board 2 LAN Board 3 Figure 1.1 Overview of NetWare ODI implementation ODI allows different applications in the same network station to use different communication protocols on the same network. Please refer to Figure 1.2 ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Dos Service Function ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄ¿ ÚÄÄÄÄÄ¿ ³ IPX Proto ³ ARP Proto ³ ³ ³ ³ ³ Stack ³ Stack ÀÄÄ^ÄÄÙ ÀÄÄ^ÄÄÙ ³ ³ ÚÄijÄÄÄÄÄÄÄÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ Link Support Layer ³ ÀÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ÚÄÄÄÄÄ¿ ÚÄÄÄÄÄ¿ ³ ³ ³ ³ ³ MILD 0 ³ MILD 1 ................ ³ NE1000 ³ Ne2000 ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ LAN Board 1 LAN Board 2 LAN Board 3 Figure 1.2 One MLID servicing multiple protocol 1.1. Multiple Link Interface Driver (MLID) : Drivers implemented by Network station must satisfy the ODI specification. These drivers are called Multiple Link Interface Driver (MLID), because each driver allows a network station to send and receive packets with the same link-level envelope allowing different communction protocol headers. In ShineNET ethernet series, we support the MLIDs: LCS8834.COM and LCS8634.COM for our cards, and agree all ODI specification. 1.2. Protocol Stack : A protocol stack is communication protocol (like IPX) written to the ODI specification. A protocol stack executed on a workstation will send and receive packets , with their own format,into the wire. If one workstation contains more than two protocol stacks, it will support multi-protocol. 1.3. Link Support Layer (LSL) : Each station on network that implement ODI must include a layer called the Link Support Layer. Both protocol stacks and MLIDs must be written to interface with the LSL residing with them in memory. The LSL also routes incoming packets from the receiving MLID to the taget protocol stack. The LSL routes outgoing packets from the originating protocol stack to the target MLID. 1.4. Benefits of use ODI MLID : There are the benefits of ODI MLID : i. support multi-protocol ii. more effective iii. more flexible 2. ShineNET ODI MLID : In ShineNET series, we support ODI MLID drivers for following executable file : LCS8834.COM ( for LCS-8834L NE1000 mode ) LCS8634.COM ( for LCS-8834L NE2000 mode ) 2.1. Network Configuration file NET.CFG : The NET.CFG file is used by the various ODI moudles (include MLID) to obtain the network system configuration information at the starting time. The ShinNET MLID will open the NET.CFG and parse the parameters in their statments, and store these informations into the driver's configuration table. 2.2. Keywords of NET.CFG : Main Heading keywords : LINK DRIVER <MLID NAME> Subsidiary keywords and parameters : DMA [#n] <channel> INT [#n] <line> MEM [#n] <addr> [range] PORT [#n] port [range] NODE ADDRESS h PROTOCOL <proto> id <frame type> FRAME <name> #n : may be #1 or #2 (assume to be #1 if this parameter absent) channel : DMA channel number line : IRQ line number addr : physical memory address in hex port : I/O port address range : port range or memory range proto : protocol name include IPX, etc. h : node address in hex id : protocol identification number frame type : link level frame type include ETHERNET_802.2 ETHERNET_802.3 ETHERNET_II ETHERNET_SNAP ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³; Example NET.CFG file; This file is functional. It ³ ³; uses hardware setting instead of default ,like the ³ ³; node address . It also shows how to creat this ³ ³; file for more than one card in this workstation ³ ³LINK DRIVER LCS8834 ³ ³ INT #1 4 ³ ³ PORT 320 ³ ³ NODE ADDRESS 040000123456 ³ ³ ³ ³LINK DRIVER LCS8634 ³ ³ INT #1 5 ³ ³ PORT 340 ³ ³ NODE ADDRESS 080000654321 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Figure 2.1 An example for NET.CFG file 2.3. Executing ODI MLID : This is a example for attaching to NOVELL file server. 1st) execute the LSL program of NOVELL operation system. 2nd) execute ShineNET MLID driver. 3th) run the IPX Protocol Stack in NOVELL named IPXODI.COM 4th) execute the NOVELL DOS SHELL NET?.COM ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³C\>LSL ³ ³Novell Link Support Layer V1.00 (900530) ³ ³(C) Copyright 1990 Novell, Inc. All Rights Reserved. ³ ³C\>LCS8634 ³ ³ShineNET LCS-8634 MLID v1.00 (910920) ³ ³(C) Copyright LONGSHINE Electronics Corp., 1990, 1991 ³ ³All Rights Reserved. ³ ³ ³ ³Int 3, Port 300, Node Address 80163350000 ³ ³Max Frame 1514 bytes, Line Speed 10 Mbps ³ ³Board 1, Frame ETHERNET_802.3 ³ ³ ³ ³C\>IPXODI ³ ³Novell IPX Protocol V1.00 (900530) ³ ³(C) Copyright 1990 Novell, Inc. All Rights Reserved. ³ ³ ³ ³IPX protocol bound to LCS-8634 MLID Board #1. ³ ³ ³ ³C\>NET4 ³ ³NetWare V3.02 - Workstation Shell for PC DOS V4.x ³ ³(C) Copyright 1990 Novell, Inc. All Rights Reserved. ³ ³Attached to server LONGSHINE ³ ³Monday, March 13, 19:0 1:02:58 am ³ ³ ³ ³C\>f: ³ ³ ³ ³F\LOGIN> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Figure 2.2 An example for attaching to NOVELL serverDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.