7/23/98 - Release 1.00
Appian Graphics Jeronimo J2 readme information for Windows 98
CONTENTS
================================================================
1) How to Install Jeronimo J2 Windows 98 Drivers
2) How to Contact Appian
3) How to Uninstall Jeronimo J2 Windows 98 Drivers
4) Machine Compatibility
5) HydraVision 98 Desktop Management Support
1) How to Install Jeronimo J2 Windows 98 Drivers
================================================================
To install downloaded Jeronimo J2 drivers for Windows 98, please
make a copy of your driver disk and perform the following steps.
These installation instructions are for Jeronimo J2 Windows 98
drivers only. HydraVision multiple monitor desktop management
software is available separately from Appian for Windows 98 and
will be released and available in August, 1998.
(a) Unzip the downloaded driver file to a floppy disk with
a utility such as Winzip (available at www.winzip.com).
This floppy disk will be your Jeronimo J2 install disk.
(b) Insert the install disk into your floppy disk drive.
(c) From the Start button on the taskbar, select Settings
and then select Control Panel. The Control Panel window
appears.
(d) Double click on the Display icon.
(e) Select the Settings tab page and click the Advanced
button. The Video Properties window appears.
(f) Select the Adapter tab page and click the Change button.
The Update Device Driver Wizard window appears.
(g) Select Next. Make sure that the option "Display a list
of all drivers in a specific location, so you can select
the driver you want" is selected.
(h) Select Next and click the Have Disk button.
(i) The Install from Disk dialog box appears. Make sure the
Windows 98 Jeronimo J2 installation disk is in the
appropriate floppy drive and select its location.
(j) Click OK. The Select Device dialog box appears with the
Jeronimo J2 Windows 98 driver selected.
(k) Select OK. You are returned to the Update Device Driver
Wizard and informed that Windows is ready to install
the Jeronimo J2 driver.
(l) Select Next. A dialog box appears informing you that the
driver files are being copied, followed by a message stating
that Windows has completed the install for the video device.
(m) Select Finish. You are returned to the Adapter tab page.
Select Apply. You are returned to the Display Properties
Control Panel. Select Close.
(n) You are prompted to restart the computer. Select Yes and
allow the computer to restart. Windows 98 now restarts in
640 x 480 single monitor mode. You can change this and other
settings using the Display Properties Control Panel. Please
refer to your Microsoft Windows 98 documentation for more
information about Display Property controls for multiple
monitors.
2) How to Contact Appian
================================================================
Appian Technical Support may be reached at 1-800-422-7369
Appian Sales may be reached at 1-800-727-7426
Appian on the internet is available at http://www.appiangraphics.com
3) How to Uninstall Jeronimo J2 Windows 98 Drivers
================================================================
To uninstall the HydraVision drivers under Windows 98, use
the Add/Remove programs control panel utility.
4) Machine Compatibility
================================================================
Some machines do not completely power down when they restart after
installing the Jeronimo J2 drivers. This can cause the driver to
fail to load. Appian recommends that you "Shut Down" the machine
after installing the Jeronimo J2 drivers rather than use the restart
option provided by Windows 98.
5) HydraVision 98 Desktop Management Support
================================================================
Under Windows 98, Appian HydraVision desktop management software
is installed separately from the driver the Jeronimo J2 driver.
This new version of HydraVision for Windows 98 and Windows NT 5.0
is called HydraVision 98. To install HydraVision 98, please download
the software from the Appian ftp site and install per the instructions
in that package. Note that HydraVision 98 will be available in August,
1998.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.