8/23/99 - Driver Release Version 1.05 Appian Graphics Jeronimo Pro readme information for Windows 98 CONTENTS ================================================================ 1) How to Install Jeronimo Pro Windows 98 Drivers 2) How to Contact Appian 3) How to Uninstall Jeronimo Pro Windows 98 Drivers 4) Machine Compatibility 5) HydraVision 98 Desktop Management Support 6) Legal Information 1) How to Install Jeronimo Pro Windows 98 Drivers =============================================================== To install downloaded Jeronimo Pro drivers for Windows 98, please make a copy of your driver disk and perform the following steps. If you are installing Jeronimo Pro drivers for Windows 98 from CD-ROM, substitute the location of your CD-ROM drive and Windows 98 drivers where applicable. These installation instructions are for Jeronimo Pro Windows 98 drivers only. HydraVision 98 multiple monitor desktop management software is available separately from Appian Graphics for Windows 98 and can be downloaded from the Appian Web site. (a) Unzip the downloaded driver file to a floppy disk with a utility such as Winzip (available at www.winzip.com). This floppy disk will be your Jeronimo Pro installation disk. (b) Insert the installation disk into your floppy disk drive. (c) From the Start button on the taskbar, select Settings and then select Control Panel. The Control Panel window appears. (d) Double click on the Display icon. (e) Select the Settings tab page and click the Advanced button. The Video Properties window appears. (f) Select the Adapter tab page and click the Change button. The Update Device Driver Wizard window appears. (g) Select Next. Make sure that the option "Display a list of all drivers in a specific location, so you can select the driver you want" is selected. (h) Select Next and click the Have Disk button. (i) The Install from Disk dialog box appears. Make sure the Windows 98 Jeronimo Pro installation disk is in the appropriate floppy drive and select its location. (j) Click OK. The Select Device dialog box appears with the Jeronimo Pro Windows 98 driver selected. (k) Select OK. You are returned to the Update Device Driver Wizard and informed that Windows is ready to install the Jeronimo Pro driver. (l) Select Next. A dialog box appears informing you that the driver files are being copied, followed by a message stating that Windows has completed the install for the video device. (m) Select Finish. You are returned to the Adapter tab page. Select Apply. You are returned to the Display Properties Control Panel. Select Close. (n) You are prompted to restart the computer. Select Yes and allow the computer to restart. Windows 98 now restarts in 640 x 480 single monitor mode. You can change this and other settings using the Display Properties Control Panel. Please refer to your Microsoft Windows 98 documentation for more information about Display Property controls for multiple monitors. 2) How to Contact Appian ================================================================ Appian Technical Support may be reached at 1-800-422-7369 or by email at support@appian.com. Appian Sales may be reached at 1-800-727-7426. Appian on the Web is available at http://www.appian.com 3) How to Uninstall Jeronimo Pro Windows 98 Drivers ================================================================ To uninstall Jeronimo Pro drivers under Windows 98, use the Windows Add/Remove programs control panel utility. 4) Machine Compatibility ================================================================ Some machines do not completely power down when they restart after installing the Jeronimo Pro drivers. This can cause the driver to fail to load. Appian recommends that you "Shut Down" the machine after installing the Jeronimo Pro drivers rather than use the restart option provided by Windows 98. 5) HydraVision 98 Desktop Management Support ================================================================ Under Windows 98, Appian HydraVision desktop management software is installed separately from the Jeronimo Pro driver. This new version of HydraVision for Windows 98 and Windows 2000 is called HydraVision 98. To install HydraVision 98, please download the software from the Appian Graphics FTP site or refer to the Jeronimo Pro CD-ROM and install per the instructions in that package. 6) Legal Information ================================================================ This material is made available for use under a license from Appian Graphics and its use is subject to all conditions and restrictions provided by the license agreement. Appian software programs and Appian hardware devices are covered by one or more of the following U.S. patents: 5,835,090 5,848,294 Additional patents are pending.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.