Appian Graphics Jeronimo Pro Readme information for Windows 2000 CONTENTS ================================================================ 1) How to Contact Appian Graphics 2) How to Install Jeronimo Pro Windows 2000 Drivers 3) How to Uninstall Jeronimo Pro Windows 2000 Drivers 4) HydraVision 98 Desktop Management Support 5) Legal Information 1) How to Contact Appian Graphics ================================================================ Appian Technical Support may be reached at 1-800-422-7369 or by email at support@appian.com. Appian Sales may be reached at 1-800-727-7426. Appian on the Web is available at http://www.appian.com 2) How to Install Jeronimo Pro Windows 2000 Drivers ================================================================ These installation instructions are for Jeronimo Pro Windows 2000 drivers only. HydraVision 98 multiple monitor desktop management software is available separately from Appian Graphics for Windows 2000 and is installed separately. NOTE: If you downloaded the Jeronimo Pro driver package from the internet, unzip the downloaded file to a temporary subdirectory on your hard drive. Appian recommends unzipping files to your hard drive rather than to floppy disks as the driver files may be larger than the 1.44 MB capacity of a single diskette. The subdirectory you create on your hard drive should be empty of all files prior to unzipping the Jeronimo Pro driver files. This temporary subdirectory can be deleted after driver installation. a) From the START button on the taskbar, select SETTINGS, then CONTROL PANEL. b) Double-click the SYSTEM icon. c) Select the HARDWARE tab, then click the DEVICE MANAGER button. d) Double-click DISPLAY ADAPTERS. The Appian Graphics Jeronimo Pro device will be listed at least twice, according to the number of graphics processors on your model. e) Double-click one of the Jeronimo Pro listings. f) Select the DRIVER tab, then click the UPDATE DRIVER button. g) The Upgrade Device Driver Wizard appears. Click NEXT. h) Select the "Display a list of known drivers..." option and click NEXT. i) Click the HAVE DISK button. j) Verify the location and click OK. k) Click NEXT, click YES, click NEXT, then click YES. l) Click FINISH, then click CLOSE. m) You will be prompted to restart the system. Click NO. n) Because there are multiple graphics processors on the Jeronimo Pro card, repeat steps e) through m) for each of the remaining display adapters listed in the Device Manager. o) Click YES to reboot the system. p) Windows 2000 now restarts in 640x480 single monitor mode. You can change this and other settings using the Display Properties dialog box. 3) How to Uninstall Jeronimo Pro Windows 2000 Drivers ================================================================ To uninstall Jeronimo Pro drivers in Windows 2000, use the Windows Add/Remove Hardware control panel utility. 4) HydraVision 98 Desktop Management Support ================================================================ In Windows 2000, Appian HydraVision desktop management software is installed separately from the Jeronimo Pro driver. HydraVision software for both Windows 98 and Windows 2000 is called HydraVision 98. To install HydraVision 98, please download the software from the Appian Graphics FTP site at http://ftp.appian.com, or refer to the Jeronimo Pro CD-ROM or diskettes and install per the instructions in that package. 5) Legal Information ================================================================ This material is made available for use under a license from Appian Graphics and its use is subject to all conditions and restrictions provided by the license agreement. Appian software programs and Appian hardware devices are covered by one or more of the following U.S. patents: 5,835,090 5,848,294 5,949,437 Additional patents are pending.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.