1. NIC210.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (NIC210.zip)

                                                                2/1/1998
               SCO UNIX 32 Bit IO Mode PCI MDI Driver
         ==================================================


The following files will be used in this installation:

Files          Contents
-----------    -----------------------------------------
PCISCO.DRV     32 Bit IO Mode PCI Ethernet MDI Driver Program
install        Transfer dos format to unix format setup program


1.  Installation Diskette in DOS format.
    Put PCI Ethernet SCO UNIX Driver diskette to floppy A: and use doscp
    command to copy SCO UNIX PCI Driver into UNIX's directories.

       # cd /
       # doscp A:/sco5/install  /install
       # chmod +x /install
       # ./install
         (put the VOL.000.000 to the /pcisco directory)

1.1 Run custom to enter software manager procedure.
1.2 Select menu "Software"
1.3 Push the "Install new"
1.4 What host(machine) do you want to install from ? "from host machine"
1.5 Insert Media, and select media device -> "Media Images"
1.6 Enter the full path to the directory containing media Images.-> "/pcisco"

2.     Use netconfig utility

       Avaiable options:

       # netconfig

3.  To add adapters, select "Add new LAN adapter" from "Hardware".
    The message "Select network adapter to be added:" will appear
    and select "32 Bit IO Mode PCI Ethernet Driver".

4.  Add Protocol to select SCO TCP/IP.

5.  Enter the internet Address of this interface         n.n.n.n

6.  Enter the netmask for this interface                 (default 255.255.255.0)

7.  Enter the boardcast address for this interface       default: n.n.n.n

8.  Do you want to relink to kernel now ?               y

9.  Do you want this kernel to boot by default (y/n)    y

10. Do you want the kernel environment rebuilt (y/n)    y

11. Reboot unix

        # shutdown -y -g0