NDIS Driver for Microsoft Windows 98
For Ethernet PCMCIA Adapters
======================================
File Descriptions:
ETHPCM.SYS NDIS3 Device Driver For Windows 98.
INSTALLATION PROCEDURE:
1. Insert the PCMCIA Adapter into the slot and boot into Windows 98.
2. Windows 98 will prompt "PCMCIA-PCMCIA-ETHERNET-CARD" in "New Hardware
Found" dialog box and "Add New Hardware Wizard" dialog box.
3. Click "Next >" button when "Search for the best for your device.
[Recommended]" is on.
4. Insert the Adapter Driver Diskette in your floppy drive.
5. Click off "Floppy disk drives". Click on the "Specify a location"
and type "A:\WIN98", then click "Next >" button.
6. Windows 98 will prompt "PCMCIA Ethernet Adapter" in "Add New Hardware
Wizard" dialog box.
7. Click "Next >" button and Windows starts to copy files from Windows
98 CD-ROM to your hard disk.
8. Click "Finish" button from "Add New Hardware Wizard" dialog box.
9. Remove the Adapter Driver Diskette from your floppy drive.
10. Restart your computer to take effect the network function.
Trademarks:
Microsoft Windows 98 is a trademark of Microsoft Corporation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.