[Identification] OptionType = NetAdapter [PlatformsSupported] ISA EISA PCMCIA "Jazz-Internal Bus" PCI [Options] ETHPCM95 [FileConstants] UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "Accton Technology Corporation" ProductMajorVersion = "4" ProductMinorVersion = "0" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "ETHPCM95" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\ETHPCM95.sys" NetRuleSoftwareType = "ETHPCM95Sys ndisDriver ETHPCM95Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """ETHPCM95Sys"" yes no container" NetRuleSoftwareClass = {"ETHPCM95Driver basic"} NetRuleSoftwareBindable = {"ETHPCM95Driver ETHPCM95Adapter non exclusive 100"} ProductHardwareName = "ETHPCM95" NetRuleHardwareType = "ETHPCM95 ETHPCM95Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"ETHPCM95Adapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" PcmciaKeyName = $(!NTN_ServiceBase)"\Pcmcia\DataBase" VersionKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion" IRQList = {2,3,4,5,10,11,12,15} IOBaseAddrHexList = { 300,320,340,360 } MemBaseAddrHexList = { C8000,C9000,CA000,CB000,CC000,CD000,CE000,CF000, + D0000,D1000,D2000,D3000,D4000,D5000,D6000,D7000, + D8000,D9000,DA000,DB000,DC000,DD000,DE000,DF000 } [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] Set !G:DebugOutputControl = 1 set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set CommonStatus = STATUS_REBOOT set ActivateDetection = TRUE set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the PCMCIA driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE set ActivateDetection = TRUE endif ; ; Check the NT version and fail if not NT 3.51 ; ; ; OpenRegKey $(!REG_H_LOCAL) "" $(VersionKeyName) $(MAXIMUM_ALLOWED) KeyVersion ; GetRegValue $(KeyVersion),"CurrentVersion",VersionStruct ; CloseRegKey $(KeyVersion) ; Set NTVersion = *($(VersionStruct),4) ; Ifstr(i) $(NTVersion) != "3.51" ; Set Error = "This version of the PCMCIA driver is only supported on Windows NT 3.51." ; goto fatal ; endif ; ; Convert Hex vvalues to Decimal ; ForListDo $(MemBaseAddrHexList) set-hextodec Temp = $($) set MemBaseAddrDecList = >($(MemBaseAddrDecList),$(Temp)) EndForListDo ForListDo $(IOBaseAddrHexList) set-hextodec Temp = $($) set IOBaseAddrDecList = >($(IOBaseAddrDecList),$(Temp)) EndForListDo ; ; Set default values ; ; IRQ = 05 ; I/O = 300 ; Mem Addr. = D0000 ; set IRQValue = *($(IRQList), 4) set IOBaseAddrValue = *($(IOBaseAddrDecList), 2) set MemBaseAddrValue = *($(MemBaseAddrDecList), 10) Debug-Output "OEMNADN2.INF: ==================================================" Debug-Output "OEMNADN2.INF: STF_CWDIR is: "$(!STF_CWDIR) Debug-Output "OEMNADN2.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE) Debug-Output "OEMNADN2.INF: Option is: "$(Option) Debug-Output "OEMNADN2.INF: !STF_NCDETECT is: "$(!STF_NCDETECT) Debug-Output "OEMNADN2.INF: !STF_NCOPTION is: "$(!STF_NCOPTION) Debug-Output "OEMNADN2.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD) Debug-Output "OEMNADN2.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO) Debug-Output "OEMNADN2.INF: ==================================================" Set DetectedCard = FALSE set from = $(fatal) set to = $(fatal) goto $(StartLabel) installadapter = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftware$(Option)Title),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Set Error = "Windows NT 3.51 only supports one PCMCIA Network Adapter of the same model in the machine at once!!" goto fatal endif endif goto adapteroptions configureadapter = + Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "InterruptNumber" set IRQValue = $(ValueData) else-Ifstr(i) $(ValueName) == "PCCARDAttributeMemoryAddress" set MemBaseAddrValue = $(ValueData) else-ifstr(i) $(ValueName) == "IoBaseAddress" set IOBaseAddrValue = $(ValueData) endif EndForListDo ; ifstr(i) $(IRQValue) == "" ; set IRQValue = *($(IRQList), 6) ; endif ; ifstr(i) $(IOBaseAddrValue) == "" ; set IOBaseAddrValue = *($(IOBaseAddrDecList), 4) ; endif ; ifstr(i) $(MemBaseAddrValue) == "" ; set MemBaseAddrValue = *($(MemBaseAddrDecList), 1) ; endif adapteroptions = + set from = adapteroptions set Offset = ~($(IOBaseAddrDecList),$(IOBaseAddrValue)) set-sub Offset = $(Offset),1 set IOBaseAddress = *($(IOBaseAddrHexList), $(Offset)) set Offset = ~($(MemBaseAddrDecList),$(MemBaseAddrValue)) set-sub Offset = $(Offset),1 set MemBaseAddress = *($(MemBaseAddrHexList),$(Offset)) read-syms FileDependentDlg$(!STF_LANGUAGE) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set IRQValue = $(Combo1Out) set MemBaseAddress = $(Combo2Out) set IOBaseAddress = $(Combo3Out) ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL Debug-Output "Action: exit. Bye." ui pop 1 goto end else ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif set Offset = ~($(MemBaseAddrHexList),$(MemBaseAddress)) set-add Offset = $(Offset),1 set MemBaseAddrValue = *($(MemBaseAddrDecList), $(Offset)) set Offset = ~($(IOBaseAddrHexList),$(IOBaseAddress)) set-add Offset = $(Offset),1 set IOBaseAddrValue = *($(IOBaseAddrDecList), $(Offset)) skipoptions =+ ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif ;************************************** ; Add the ETHPCM95 to the PCMCIA Database ;************************************** OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName) $(MAXIMUM_ALLOWED) KeyPcmcia Ifstr $(KeyPcmcia) == $(KeyNull) else OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName)"\ACCTON" $(MAXIMUM_ALLOWED) KeyAccton Ifstr $(KeyAccton) != $(KeyNull) CloseRegKey $(KeyAccton) DeleteRegTree $(KeyPcmcia) "ACCTON" endif CreateRegKey $(KeyPcmcia) { "ACCTON" , 0 , "" } "" $(MAXIMUM_ALLOWED) "" KeyAccton CreateRegKey $(KeyAccton) { "EN2216-PCMCIA-ETHERNET" , 0 , "" } "" $(MAXIMUM_ALLOWED) "" Key2216 SetRegValue $(Key2216) {Driver,$(NoTitle),$(!REG_VT_SZ),ETHPCM95} CreateRegKey $(KeyAccton) { "EN2218-LAN/MODEM" , 0 , "" } "" $(MAXIMUM_ALLOWED) "" Key2218 SetRegValue $(Key2218) {Driver,$(NoTitle),$(!REG_VT_SZ),ETHPCM95} CreateRegKey $(KeyAccton) { "EN2212" , 0 , "" } "" $(MAXIMUM_ALLOWED) "" Key2212 SetRegValue $(Key2212) {Driver,$(NoTitle),$(!REG_VT_SZ),ETHPCM95} CloseRegKey $(KeyPcmcia) CloseRegKey $(KeyAccton) CloseRegKey $(Key2216) CloseRegKey $(Key2218) CloseRegKey $(Key2212) endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftware$(Option)Title), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Description)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif endif Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters writeparameters = + Debug-Output "Write Parameters" set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),1},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),0},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {CardType,$(NoTitle),$(!REG_VT_DWORD),1},+ {PCCARDAttributeMemoryAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemBaseAddrValue)},+ {PCCARDAttributeMemorySize,$(NoTitle),$(!REG_VT_DWORD),4096},+ {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+ {Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1)}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif EndWait goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Debug-Output "Remove Adapter" Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName) $(MAXIMUM_ALLOWED) KeyPcmcia Ifstr $(KeyPcmcia) == $(KeyNull) else OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName)"\ACCTON" $(MAXIMUM_ALLOWED) KeyAccton Ifstr $(KeyAccton) != $(KeyNull) CloseRegKey $(KeyAccton) DeleteRegTree $(PcmciaKeyName) "ACCTON" endif endif goto end UpgradeSoftware = + Debug-Output "Upgrate Software" OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) else goto fatalregistry endif goto end successful = + goto end abandon = + Debug-Output "Abandon" ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [Install-Option] Debug-Output "Install-Option" set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-ETHPCM95 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif ifstr(i) $(DoConfig) == "YES" endif Exit [Install-Update] Debug-Output "Install-Update" set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-ETHPCM95 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers exit [Source Media Descriptions] 1 = "Accton EN221x PCMCIA Series Driver Diskette" [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 1,oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename) [Files-ETHPCM95] 1,ETHPCM95.SYS , SIZE=19456 [LanguagesSupported] ENG [OptionsTextENG] ETHPCM95 = "Accton EN221x PCMCIA Series Adapter" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" ProductSoftwareETHPCM95Description = "Accton EN221x PCMCIA Series Adapter Driver" ProductSoftwareETHPCM95Title = "Accton EN221x PCMCIA Series Adapter Driver" ProductHardwareETHPCM95Description = "Accton EN221x PCMCIA Series Adapter" ProductHardwareETHPCM95Title = "Accton EN221x PCMCIA Series Adapter" FunctionTitle = "Accton EN221x PCMCIA Series Adapter Setup" ShellCodeErrorTitle = "Error: "$(FunctionTitle) ShellCodeErrorText = "Shell Code Error." [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG] Combo1Label = "&IRQ Level:" Combo2Label = "&Memory Base Address:" Combo3Label = "I/&O Port Address:" DlgType = "MultiCombo" DlgTemplate = "WD" Caption = $(FunctionTitle) Combo1List = $(IRQList) Combo1Out = $(IRQValue) Combo2List = $(MemBaseAddrHexList) Combo2Out = $(MemBaseAddress) Combo3List = $(IOBaseAddrHexList) Combo3Out = $(IOBaseAddress) ComboListItemsIn = {Combo1List, Combo2List, Combo3List} ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out} EditTextIn = "" EditTextLim = "" NotifyFields = {NO, NO, NO} HelpContext = $(!IDH_DB_OEMNADWD_INS)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.