1. en2218b.zip Driver
  2. OEMSETUP.INF File Contents

OEMSETUP.INF Driver File Contents (en2218b.zip)

 DOWNLOAD NOW
OEMSETUP.INF Driver Update Utility 
[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    ISA
    EISA
    PCMCIA
    "Jazz-Internal Bus"
    PCI
[Options]
    EN2218NT
[FileConstants]
UtilityInf      = "UTILITY.INF"
ParamInf        = "NCPARAM.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "PCMCIA"
ProductMajorVersion     = "3"
ProductMinorVersion     = "51"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "EN2218NT"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\en2218nt.sys"
NetRuleSoftwareType     = "En2218ntSys ndisDriver En2218ntDriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """En2218ntSys"" yes no container"
NetRuleSoftwareClass    = {"En2218ntDriver basic"}
NetRuleSoftwareBindable = {"En2218ntDriver En2218ntAdapter non exclusive 100"}
ProductHardwareName     = "EN2218NT"
NetRuleHardwareType     = "En2218nt En2218ntAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"En2218ntAdapter basic"}
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
PcmciaKeyName   = $(!NTN_ServiceBase)"\Pcmcia\DataBase"
VersionKeyName  = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion"
IRQList = {2,3,4,5,9,10,11,12,15}
IOBaseAddrHexList = { 300,320,340,360 }
MemBaseAddrHexList = { C8000,C9000,CA000,CB000,CC000,CD000,CE000,CF000, +
		       D0000,D1000,D2000,D3000,D4000,D5000,D6000,D7000, +
		       D8000,D9000,DA000,DB000,DC000,DD000,DE000,DF000 }

;********************* Modem Device resource list BEGIN ********
ModemIOBaseHexList      = {3F8, 2F8, 3E8, 2E8 }
ComPortList                 = ^(ComPortChoices, 1)
ComPortValues               = ^(ComPortChoices, 2)
;********************* Modem Device resource list END ***********
OptionHelpFile = "EN2218NT.hlp"
HelpEN2218NTId = 10

[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
	ifstr(i) $($1) == ""
	   goto returnoptions
	endif
	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
	   goto returnoptions
	else
	   set Status = STATUS_NOTSUPPORTED
	   goto finish_ReturnOptions
	endif
    else
	set Status = STATUS_NOLANGUAGE
	goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    Set !G:DebugOutputControl = 1
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    set ActivateDetection = FALSE
    Ifstr(i) $(!NTN_InstallMode) == deinstall
		set StartLabel = removeadapter
	else-Ifstr(i) $(!NTN_InstallMode) == Update
			set StartLabel = UpgradeSoftware
	else-Ifstr(i) $(!NTN_InstallMode) == bind
		set StartLabel = bindingadapter
	else-Ifstr(i) $(!NTN_InstallMode) == configure
		set CommonStatus = STATUS_REBOOT
		set ActivateDetection = TRUE
		set StartLabel = configureadapter
		Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
			Debug-Output "Cannot configure the PCMCIA driver software."
			Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error: cannot get an error string."
				goto ShellCodeError
			endif
			set Error = $($R0)
			set from = end
			set to = end
			goto nonfatalinfo
		endif
    else
		set StartLabel = installadapter
		set OEM_ABANDON_OPTIONS = {}
		set OEM_ABANDON_SOFTWARE = FALSE
		set OEM_ABANDON_ON = TRUE
		set ActivateDetection = TRUE
    endif
;
; Check the NT version and fail if not NT 3.51
;

;   OpenRegKey $(!REG_H_LOCAL) "" $(VersionKeyName) $(MAXIMUM_ALLOWED) KeyVersion
;   GetRegValue $(KeyVersion),"CurrentVersion",VersionStruct
;   CloseRegKey $(KeyVersion)
;   Set NTVersion = *($(VersionStruct),4)
;   Ifstr(i) $(NTVersion) != "3.51"
;       Set Error = "This version of the PCMCIA driver is only supported on Windows NT 3.51."
;       goto fatal
;   endif

;
; Convert Hex values to Decimal
;
    ForListDo $(MemBaseAddrHexList)
	set-hextodec Temp = $($)
	set MemBaseAddrDecList = >($(MemBaseAddrDecList),$(Temp))
    EndForListDo

    ForListDo $(IOBaseAddrHexList)
	set-hextodec Temp = $($)
	set IOBaseAddrDecList = >($(IOBaseAddrDecList),$(Temp))
    EndForListDo

;------------------------------------------------------------ WHL-----
    ForListDo $(ModemIOBaseHexList)
	set-hextodec Temp = $($)
	set ModemIOBaseDecList = >($(ModemIOBaseDecList),$(Temp))
    EndForListDo

;---------------------------------------------------------------------
;---------------------------------------------------------------------
; Set default values
;
;       IRQ = 05
;       I/O = 300
;       Mem Addr. = D0000
;
;---------------------------------------------------------------------
    set IRQValue = *($(IRQList), 4)
    set IOBaseAddrValue = *($(IOBaseAddrDecList), 2)
    set MemBaseAddrValue = *($(MemBaseAddrDecList), 10)

;---------------------------- Modem device default values ---
    set ModemIRQValue = *($(IRQList), 6)
    set ModemIOBaseValue = *($(ModemIOBaseDecList), 4)   
    set ComPortValue = *($(ComPortList), 3)
;-----------------------------------------------------------------------
    Set DetectedCard = FALSE
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
;---------------------------------------------------------------------
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	CloseRegKey $(KeyProduct)
	ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
	   Shell $(UtilityInf), VerExistedDlg, $(ProductSoftware$(Option)Title),+
	       $(ProductVersion)
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "ShellCode error: cannot get an error string."
	       goto ShellCodeError
	   endif
	   goto end
	else
	   Set Error = "Windows NT 3.51 only supports one PCMCIA Network Adapter of the same model in the machine at once!!"
	   goto fatal
	endif
    endif
    install "Install-Hlp"                   // WHL 
    goto adapteroptions
;---------------------------------------------------------------------
configureadapter = +
    Ifstr $(KeyProduct) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
	Ifstr $(KeyProduct) == $(KeyNull)
	    set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	    Debug-Output "Cannot find component product key"
	    goto fatalregistry
	Endif
    Endif
    Debug-Output "INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "INF: FindService shell failure"
	Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
	Debug-Output "INF: FindService Shell error: "$($R0)
	Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
	set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	Debug-Output "Cannot find component service"
	goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
	set ValueItem = $($)
	set ValueName = *($(ValueItem),1)
	set ValueData = *($(ValueItem),4)
	Ifstr(i) $(ValueName) == "InterruptNumber"
	    set IRQValue = $(ValueData)
	else-Ifstr(i) $(ValueName) == "PCCARDAttributeMemoryAddress"
	    set MemBaseAddrValue = $(ValueData)
	else-ifstr(i) $(ValueName) == "IoBaseAddress"
	    set IOBaseAddrValue = $(ValueData)
;----------------------------------------------WHL Modem setup--------
	else-ifstr(i) $(ValueName) == "ComIoBaseAddress"
	    set ModemIOBaseValue = $(ValueData)
	else-ifstr(i) $(ValueName) == "ComIRQNumber"
	    set ModemIRQValue = $(ValueData)
	else-ifstr(i) $(ValueName) == "ComPort"
	    set ComPortValue = $(ValueData)
;---------------------------------------------------------------------
	endif
    EndForListDo

;---------------------------------------------------------------------
adapteroptions = +
    set from = adapteroptions
    set Offset = ~($(IOBaseAddrDecList),$(IOBaseAddrValue))
    set-sub Offset = $(Offset),1
    set IOBaseAddress = *($(IOBaseAddrHexList), $(Offset))
    set Offset = ~($(MemBaseAddrDecList),$(MemBaseAddrValue))
    set-sub Offset = $(Offset),1
    set MemBaseAddress = *($(MemBaseAddrHexList),$(Offset))
;-------------------------------------WHL Modem Setup-----------------
    set Offset = ~($(ModemIOBaseDecList),$(ModemIOBaseValue))
    set-sub Offset = $(Offset),1
    set ModemIOBaseAddress = *($(ModemIOBaseHexList), $(Offset))
;---------------------------------------------------------------------
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
		set IRQValue = $(Combo1Out)
		set MemBaseAddress = $(Combo2Out)
		set IOBaseAddress = $(Combo3Out)
		ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
		set CommonStatus = STATUS_USERCANCEL
		Debug-Output "Action: exit. Bye."
		ui pop 1
		goto end
    else
		ui pop 1
		Debug-Output "Action: unknown. Bye."
		goto end
    endif

    set Offset = ~($(MemBaseAddrHexList),$(MemBaseAddress))
    set-add Offset = $(Offset),1
    set MemBaseAddrValue = *($(MemBaseAddrDecList), $(Offset))
    set Offset = ~($(IOBaseAddrHexList),$(IOBaseAddress))
    set-add Offset = $(Offset),1
    set IOBaseAddrValue = *($(IOBaseAddrDecList), $(Offset))

;----------------------------------------------- WHL Modem Setup ---------
    read-syms FileDependent1Dlg$(!STF_LANGUAGE)
    SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
		set ModemIRQValue = $(Combo4Out)
		set ComPortValue = $(Combo5Out)
		set ModemIOBaseAddress = $(Combo6Out)
		ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
		set CommonStatus = STATUS_USERCANCEL
		Debug-Output "Action: exit. Bye."
		ui pop 1
		goto end
    else
		ui pop 1
		Debug-Output "Action: unknown. Bye."
		goto end
    endif
    
    set Offset = ~($(ModemIOBaseHexList),$(ModemIOBaseAddress))
    set-add Offset = $(Offset),1
    set ModemIOBaseValue = *($(ModemIOBaseDecList), $(Offset))
;---------------------------------------------------------------------
skipoptions =+
    ifint $(OldVersionExisted) == $(TRUE)
	ifstr(i) $(!NTN_InstallMode) == configure
		goto writeparameters
	endif
    endif
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
	ifstr(i) $(!NTN_InstallMode) == "install"
		Ifstr(i) $(DoCopy) == "YES"
		    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
		    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Goto ShellCodeError
		    Else-Ifstr(i) $($R0) == STATUS_FAILED
			Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
			   goto ShellCodeError
			endif
			set Error = $($R0)
			Goto fatal
		    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
			Goto successful
		    Endif
		    Set SrcDir = $($R1)
		Endif
		install "Install-Option"
		ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
		    Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		    endif
		    set Error = $($R0)
		    goto fatal
		endif
	endif
;**************************************
; Add the EN2218 to the PCMCIA Database
;**************************************

    OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName) $(MAXIMUM_ALLOWED) KeyPcmcia
    Ifstr $(KeyPcmcia) == $(KeyNull)
    else
       OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName)"\ACCTON" $(MAXIMUM_ALLOWED) KeyAccton
       Ifstr $(KeyAccton) != $(KeyNull)
	; Accton Reg Entry exists, check if 2218 exists 
	  OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName)"\ACCTON\EN2218-LAN/MODEM" $(MAXIMUM_ALLOWED) Key2218
	  Ifstr $(Key2218) != $(KeyNull)
	   DeleteRegTree $(KeyAccton) "EN2218-LAN/MODEM"
	  endif
       else
	  ; Accton key does not exist, create it
	  CreateRegKey $(KeyPcmcia) { "ACCTON" , 0 , "" } "" $(MAXIMUM_ALLOWED) "" KeyAccton
       endif

       CreateRegKey $(KeyAccton) { "EN2218-LAN/MODEM" , 0 , "" } "" $(MAXIMUM_ALLOWED) "" Key2218
       SetRegValue $(Key2218) {Driver,$(NoTitle),$(!REG_VT_SZ),en2218nt}
       CloseRegKey $(KeyPcmcia)
       CloseRegKey $(KeyAccton)
       CloseRegKey $(Key2218)
    endif

       Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
			$(ProductSoftwareName), +
			$(ProductSoftwareName), +
			$(ProductSoftware$(Option)Title), $(STF_CONTEXTINFNAME), +
			$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
			$(NetEventDLL)
       Set OEM_ABANDON_SOFTWARE = TRUE
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error"
	goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       set KeyProduct      = $($R1)
       Set SoftNetRulesKey = $($R2)
       CloseRegKey $($R3)
       CloseRegKey $($R4)
       CloseRegKey $($R5)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	EndWait
	Debug-Output "Registry error: add software components"
	CloseRegKey $(KeyProduct)
	CloseRegKey $(SoftNetRulesKey)
	goto fatalregistry
       endif
       set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
		   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
		   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
		   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Title)},+
		   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Description)},+
		   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
		   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
       Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error."
	goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	EndWait
	Debug-Output "Registry error: add value list."
	CloseRegKey $(KeyProduct)
	CloseRegKey $(SoftNetRulesKey)
	goto fatalregistry
       endif
       set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
			{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
			{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
			{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
			{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
			{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
       Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error."
	goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       CloseRegKey $(KeyProduct)
       CloseRegKey $(SoftNetRulesKey)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	EndWait
	Debug-Output "Resgitry error: add value list."
	goto fatalregistry
       endif
    endif
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
    ifint $($R4) != -1
		Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "Cannot add hardware component"
		goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		EndWait
		Debug-Output "Registry error: add hardware component"
		CloseRegKey $($R1)
		CloseRegKey $($R2)
		CloseRegKey $($R3)
		goto fatalregistry
    endif
    set KeyParameters = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber = $($R4)
    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
		       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
		       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
		       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
		       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
		       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error"
		goto ShellCodeError
    endif
    CloseRegKey $($R1)
    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
			{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
			{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
			{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error."
		goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		EndWait
		Debug-Output "Resgitry error: add value list."
		CloseRegKey $(KeyParameters)
		CloseRegKey $(KeyAdapterRules)
		goto fatalregistry
    endif
    CloseRegKey $(KeyAdapterRules)
    goto writeparameters
writeparameters = +
    Debug-Output "Write Parameters"
    set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
		       {BusType,$(NoTitle),$(!REG_VT_DWORD),1},+
		       {BusNumber,$(NoTitle),$(!REG_VT_DWORD),0},+
		       {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
		       {CardType,$(NoTitle),$(!REG_VT_DWORD),1},+
		       {PCCARDAttributeMemoryAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemBaseAddrValue)},+
		       {PCCARDAttributeMemorySize,$(NoTitle),$(!REG_VT_DWORD),4096},+
		       {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
		       {ComIoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(ModemIOBaseValue)},+
		       {ComIRQNumber,$(NoTitle),$(!REG_VT_DWORD),$(ModemIRQValue)},+
		       {ComPort, $(NoTitle),$(!REG_VT_SZ), $(ComPortValue)},+              
		       {Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1)}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    CloseRegKey $(KeyParameters)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error."
		goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		Debug-Output "Registry error: Add value list"
		goto fatalregistry
    endif
    EndWait
;---------------------------------------- Modem Section Begin WHL -------
; Add the COM port info to the 
; SYSTEM\CurrentControlSet\Services\Serial\Parameters 
; section of the registry
; ------------------------------------------------------------
    OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters\SerialEn2218" $(MAXIMUM_ALLOWED) SerialHandle
    Ifstr $(SerialHandle) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) SerialKey
	CreateRegKey $(SerialKey) {"SerialEn2218",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" SerialHandle
	CloseRegKey $(SerialKey)
    endif
    set NewValueList = {{DosDevices, $(NoTitle),$(!REG_VT_SZ), $(ComPortValue)},+              ; "COMx"      
			{ForceFifoEnable, $(NoTitle), $(!REG_VT_DWORD), 0},+                        ; Always false
			{Interrupt, $(NoTitle), $(!REG_VT_DWORD), $(ModemIRQValue)},+   ; Interrupt for Modem
			{PortAddress, $(NoTitle),$(!REG_VT_DWORD), $(ModemIOBaseValue)}}     ; I/O Base address for Modem
    Shell  $(UtilityInf), AddValueList, $(SerialHandle), $(NewValueList)
    CloseRegKey $(SerialHandle)

    OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP\SERIALCOMM" $(MAXIMUM_ALLOWED) SerialHandle
    Ifstr $(SerialHandle) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP" $(MAXIMUM_ALLOWED) SerialKey
	CreateRegKey $(SerialKey) {"SERIALCOMM",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" SerialHandle
	CloseRegKey $(SerialKey)
    endif
    SetRegValue $(SerialHandle) {"SerialEn2218",$(NoTitle),$(!REG_VT_SZ),$(ComPortValue)}
    CloseRegKey $(SerialHandle)

    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\Ports" $(MAXIMUM_ALLOWED) SerialHandle
    Ifstr $(SerialHandle) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(MAXIMUM_ALLOWED) SerialKey
	CreateRegKey $(SerialKey) {"Ports",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" SerialHandle
	CloseRegKey $(SerialKey)
    endif
    SetRegValue $(SerialHandle) {$(ComPortValue)":",$(NoTitle),$(!REG_VT_SZ), "9600,n,8,1"}
    CloseRegKey $(SerialHandle)

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "<DBG> ShellCode error."
	goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	Debug-Output "<DBG> Registry error: Add value list"
	goto fatalregistry
    endif

    EndWait

    goto successful

;---------------------------------------- Modem Section WHL END   -------
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Debug-Output "Remove Adapter"
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
		Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
				$(ProductSoftwareName)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error"
				goto ShellCodeError
		endif
		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
				goto fatalregistry
		endif
    else
		Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
			$(ProductSoftwareName), $(!NTN_RegBase)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error"
				goto ShellCodeError
		endif
		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
				goto fatalregistry
		endif
    endif

    OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName) $(MAXIMUM_ALLOWED) KeyPcmcia
    Ifstr $(KeyPcmcia) == $(KeyNull)
    else
       OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName)"\ACCTON" $(MAXIMUM_ALLOWED) KeyAccton
       Ifstr $(KeyAccton) != $(KeyNull)
	; Accton Reg Entry exists, check if 2218 exists 
	  OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName)"\ACCTON\EN2218-LAN/MODEM" $(MAXIMUM_ALLOWED) Key2218
	  Ifstr $(Key2218) != $(KeyNull)
	   DeleteRegTree $(KeyAccton) "EN2218-LAN/MODEM"
	  endif
	   CloseRegKey $(KeyAccton)
	   CloseRegKey $(KeyPcmcia)
       endif
    endif

; delete serial device
    OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) SerialHandle
    Ifstr $(SerialHandle) != $(KeyNull)
	   OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters\SerialEn2218" $(MAXIMUM_ALLOWED) SerialKey
       Ifstr $(SerialKey) != $(KeyNull)
	        DeleteRegTree $(SerialHandle) "SerialEn2218"
       endif
	    
       CloseRegKey $(SerialHandle)
    endif
;

    goto end
UpgradeSoftware = +
    Debug-Output "Upgrate Software"
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	install "Install-Update"
	ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	    goto fatal
	endif
	SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
	SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
	CloseRegKey $(KeyProduct)
    else
	goto fatalregistry
    endif
    goto end
successful = +
    goto end
abandon = +
    Debug-Output "Abandon"
    ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $($)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), FALSE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
	goto $(from)
    else
	goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
	Set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(from)
    else
	goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error: cannot get an error string."
	goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
fatal = +
    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Hlp]
   set STF_VITAL = ""
   AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   Exit
[Install-Option]
    Debug-Output "Install-Option"
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
    AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
	AddSectionFilesToCopyList Files-EN2218  $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   Debug-Output "Install-Update"
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-EN2218 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   exit
[Source Media Descriptions]
     1 = "Accton EN2218 Multi-function PC Card"

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386

[Files-Inf]
1,oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)

[Files-EN2218]
1,EN2218NT.SYS , SIZE=19456

[Files-Hlp]
1,EN2218NT.HLP , SIZE=999

[LanguagesSupported]
    ENG

[OptionsTextENG]
    EN2218NT = "Accton EN2218 Multi-function PC Card"

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
	       "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
ProductSoftwareEN2218NTDescription = "Accton EN2218 Multi-function PC Card Driver"
ProductSoftwareEN2218NTTitle       = "Accton EN2218 Multi-function PC Card Driver"
ProductHardwareEN2218NTDescription = "Accton EN2218 Multi-function PC Card"
ProductHardwareEN2218NTTitle       = "Accton EN2218 Multi-function PC Card"
FunctionTitle   = "Accton EN2218 Multi-function PC Card Setup"
FunctionTitleLAN   = "Accton EN2218 Multi-function PC Card LAN Setup"
FunctionTitleModem   = "Accton EN2218 Multi-function PC Card Modem Setup"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
[DialogConstantsENG]
Help  = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[FileDependentDlgENG]
Combo1Label = "LAN &IRQ Level:"
Combo2Label = "&Memory Base Address:"
Combo3Label = "LAN I/&O Port Address:"
DlgType = "MultiCombo"
DlgTemplate = "WD"
Caption = $(FunctionTitleLAN)
Combo1List = $(IRQList)
Combo1Out  = $(IRQValue)
Combo2List = $(MemBaseAddrHexList)
Combo2Out  = $(MemBaseAddress)
Combo3List = $(IOBaseAddrHexList)
Combo3Out  = $(IOBaseAddress)
ComboListItemsIn  = {Combo1List, Combo2List, Combo3List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out}
EditTextIn = ""
EditTextLim = ""
NotifyFields = {NO, NO, NO}
MinHelpId = 10
MaxHelpId = 1070
HelpContext = $(Help$(Option)Id)


[FileDependent1DlgENG]
Combo1Label = "Modem IR&Q Level:"
Combo2Label = "Modem &COM Port:"
Combo3Label = "Modem I/O &Port Address:"
DlgType = "MultiCombo"
DlgTemplate = "WD"
Caption = $(FunctionTitleModem)
Combo4List = $(IRQList)
Combo4Out  = $(ModemIRQValue)
Combo5List = $(ComPortList)
Combo5Out  = $(ComPortValue)
Combo6List = $(ModemIOBaseHexList)
Combo6Out  = $(ModemIOBaseAddress)
ComboListItemsIn  = {Combo4List, Combo5List, Combo6List}
ComboListItemsOut = {Combo4Out, Combo5Out, Combo6Out}
EditTextIn = ""
EditTextLim = ""
NotifyFields = {NO, NO, NO}
MinHelpId = 10
MaxHelpId = 1070
HelpContext = $(Help$(Option)Id)


[ComPortChoices]
CP_1 = "COM1", 1
CP_2 = "COM2", 2
CP_3 = "COM3", 3
CP_4 = "COM4", 4
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2026 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web2, load: 3.77