Accton EN2218 Multi-function PC Card Driver Installation for Microsoft Windows 95 ============================================ File description: ETHPCMF.INF: EN2218 multi-function card information file ETHPCMDM.INF: EN2218 modem driver information file ETHPCNET.INF: EN2218 Ethernet driver information file EN2218.SYS: EN2218 Windows 95 device driver README.TXT: This file Windows 95 (Release 950 and 950a) installation procedure: 1. Insert EN2218 into a PCMCIA slot. Wait for the "New Hardware Found" window to appear, with "ACCTON-EN2218-LAN/MODEM" as the device name. 2. Select "Drivers from disk provided by hardware manufacturer," and click OK. 3. Wait for "Install From Disk" window to appear. Insert driver diskette in drive A:, enter "A:\WIN95," and click OK. 4. Windows 95 displays a window with the the message "Unknown device", and follows with another window with the message "Accton EN2218 Multi-function PC Card (modem)." Windows 95 is installing the device information file for the modem device. 5. Windows 95 displays a window with the the message "Unknown device", and follows with another window with the message "Accton EN2218 Multi-function PC Card (Ethernet)." Windows 95 is installing the driver for the LAN (Ethernet) device. If Windows 95 asks for the Windows 95 CD-ROM, please specify the location of it. 6. Wait for the installation process to complete. 7. In Control Panel, select the Network icon. If the desired clients (e.g. Client for Microsoft Networks) are not installed, please install them. 8. Shutdown and restart Windows 95 to take effect the change. Windows 95 OSR2 (Release 950 B) installation procedure: 1. Insert the PC card into a PCMCIA slot. Wait for the "New Hardware Found" window to appear, with "ACCTON-EN2218-LAN/MODEM" displayed as the device name. 2. The "Update Device Driver Wizard" window appears, with the message "This wizard will complete the installation of: Standard PCMCIA Card Modem." Click the "Next>" button. 3. Windows 95 then asks for the location of the driver. Click on "Other Locations." The "Select Other Location" dialog box appears. Enter "A:\WIN95," and click OK. 4. The "Update Device Driver Wizard" window shows up again, with the message "Windows found the following updated driver for the device: Accton EN2218 Multi-function PC Card." Click the "Finish" button. 5. Windows 95 asks for the location of the ETHPCMDM.INF file. Enter "A:\WIN95" in the dialog box, and click OK. 6. Windows 95 displays a window with the the message "Unknown device", and follows with another window with the message "Accton EN2218 Multi-function PC Card (modem)." Windows 95 is installing the device information file for the modem device. 7. Windows 95 displays a window with the the message "Unknown device", and follows with another window with the message "Accton EN2218 Multi-function PC Card (Ethernet)." Windows 95 is installing the driver for the LAN (Ethernet) device. If Windows 95 asks for the Windows 95 CD-ROM, please specify the location of it. 8. Wait for the installation process to complete. 9. In Control Panel, select the Network icon. If the desired clients (e.g. Client for Microsoft Networks) are not installed, please install them. 10. Shutdown and restart Windows 95 to take effect the change. Reinstsall Procedure: If you receive a new driver for EN2218, you need to reinstall the driver. To completely install the new driver, you need to remove information about the old driver first. Depending on which previous version of EN2218 driver you have installed, and depending on the version of Windows 95 you use, the information about the original driver may be stored in different locations on the hard disk. The following is a step-by-step guide to help you to remove all the related files. In the following discussion, it is assumed the Windows 95 system files are installed under the \WINDOWS directory. If necessary, change the name of this directory to match your particular installation. 1. Change directory to \WINDOWS\INF. Note that this directory is hidden, but you can change directory into it. 2. There may have one or two OEMx.INF files in \WINDOWS\INF that contains EN2218 information (x in OEMx.INF represents a digit, such as OEM0.INF.) Check the content of all the OEMx.INF files, and delete those that are related to EN2218. 3. In \WINDOWS\INF, search for and delete the following two files: ETHPCMDM.INF ETHPCNET.INF If these two files do not exist, ignore this step. 4. If the directory \WINDOWS\INF\OTHER exists, carry out this step. Otherwise go to Step 5. Delete the following files existed in \WINDOWS\INF\OTHER: MicrosoftETHPCMF.inf MicrosoftETHPCMDM.inf MicrosoftETHPCNET.inf 5. In Control Panel, select the System icon, and then select the Device Manager tab. 6. Double click on the "Multi-function adapters" item. The "Accton EN2218 Multi-function PC Card" entry appears. Click on this entry to select it. 7. Press the Remove button. When the system asks for confirmation, select OK. 8. After the system removes the Multi-function device, the associated Modem and LAN devices are also removed. The system then asks you to confirm to restart the system. Select OK. 9. After the system restarts, please follow the steps under the "installation steps" to install the new driver.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.