[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
PCMCIA
"Jazz-Internal Bus"
PCI
[Options]
ETHPCM18
[FileConstants]
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "PCMCIA"
ProductMajorVersion = "3"
ProductMinorVersion = "51"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "ETHPCM18"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\ethpcm18.sys"
NetRuleSoftwareType = "Ethpcm18Sys ndisDriver Ethpcm18Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """Ethpcm18Sys"" yes no container"
NetRuleSoftwareClass = {"Ethpcm18Driver basic"}
NetRuleSoftwareBindable = {"Ethpcm18Driver Ethpcm18Adapter non exclusive 100"}
ProductHardwareName = "ETHPCM18"
NetRuleHardwareType = "Ethpcm18 Ethpcm18Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"Ethpcm18Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
PcmciaKeyName = $(!NTN_ServiceBase)"\Pcmcia\DataBase"
VersionKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion"
IRQList = {2,3,4,5,9,10,11,12,15}
IOBaseAddrHexList = { 300,320,340,360 }
MemBaseAddrHexList = { C8000,C9000,CA000,CB000,CC000,CD000,CE000,CF000, +
D0000,D1000,D2000,D3000,D4000,D5000,D6000,D7000, +
D8000,D9000,DA000,DB000,DC000,DD000,DE000,DF000 }
;********************* Modem Device resource list BEGIN ********
ModemIOBaseHexList = {3F8, 2F8, 3E8, 2E8 }
ComPortList = ^(ComPortChoices, 1)
ComPortValues = ^(ComPortChoices, 2)
;********************* Modem Device resource list END ***********
OptionHelpFile = "ETHPCM18.hlp"
HelpETHPCM18Id = 10
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
Set !G:DebugOutputControl = 1
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set CommonStatus = STATUS_REBOOT
set ActivateDetection = TRUE
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the PCMCIA driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
set ActivateDetection = TRUE
endif
;
; Check the NT version and fail if not NT 3.51
;
; OpenRegKey $(!REG_H_LOCAL) "" $(VersionKeyName) $(MAXIMUM_ALLOWED) KeyVersion
; GetRegValue $(KeyVersion),"CurrentVersion",VersionStruct
; CloseRegKey $(KeyVersion)
; Set NTVersion = *($(VersionStruct),4)
; Ifstr(i) $(NTVersion) != "3.51"
; Set Error = "This version of the PCMCIA driver is only supported on Windows NT 3.51."
; goto fatal
; endif
;
; Convert Hex values to Decimal
;
ForListDo $(MemBaseAddrHexList)
set-hextodec Temp = $($)
set MemBaseAddrDecList = >($(MemBaseAddrDecList),$(Temp))
EndForListDo
ForListDo $(IOBaseAddrHexList)
set-hextodec Temp = $($)
set IOBaseAddrDecList = >($(IOBaseAddrDecList),$(Temp))
EndForListDo
;------------------------------------------------------------ WHL-----
ForListDo $(ModemIOBaseHexList)
set-hextodec Temp = $($)
set ModemIOBaseDecList = >($(ModemIOBaseDecList),$(Temp))
EndForListDo
;---------------------------------------------------------------------
;---------------------------------------------------------------------
; Set default values
;
; IRQ = 05
; I/O = 300
; Mem Addr. = D0000
;
;---------------------------------------------------------------------
set IRQValue = *($(IRQList), 4)
set IOBaseAddrValue = *($(IOBaseAddrDecList), 2)
set MemBaseAddrValue = *($(MemBaseAddrDecList), 10)
;---------------------------- Modem device default values ---
set ModemIRQValue = *($(IRQList), 6)
set ModemIOBaseValue = *($(ModemIOBaseDecList), 4)
set ComPortValue = *($(ComPortList), 3)
;-----------------------------------------------------------------------
Set DetectedCard = FALSE
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
;---------------------------------------------------------------------
installadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftware$(Option)Title),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
Set Error = "Windows NT 3.51 only supports one PCMCIA Network Adapter of the same model in the machine at once!!"
goto fatal
endif
endif
install "Install-Hlp" // WHL
goto adapteroptions
;---------------------------------------------------------------------
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "PCCARDAttributeMemoryAddress"
set MemBaseAddrValue = $(ValueData)
else-ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddrValue = $(ValueData)
;----------------------------------------------WHL Modem setup--------
else-ifstr(i) $(ValueName) == "ComIoBaseAddress"
set ModemIOBaseValue = $(ValueData)
else-ifstr(i) $(ValueName) == "ComIRQNumber"
set ModemIRQValue = $(ValueData)
else-ifstr(i) $(ValueName) == "ComPort"
set ComPortValue = $(ValueData)
;---------------------------------------------------------------------
endif
EndForListDo
;---------------------------------------------------------------------
adapteroptions = +
set from = adapteroptions
set Offset = ~($(IOBaseAddrDecList),$(IOBaseAddrValue))
set-sub Offset = $(Offset),1
set IOBaseAddress = *($(IOBaseAddrHexList), $(Offset))
set Offset = ~($(MemBaseAddrDecList),$(MemBaseAddrValue))
set-sub Offset = $(Offset),1
set MemBaseAddress = *($(MemBaseAddrHexList),$(Offset))
;-------------------------------------WHL Modem Setup-----------------
set Offset = ~($(ModemIOBaseDecList),$(ModemIOBaseValue))
set-sub Offset = $(Offset),1
set ModemIOBaseAddress = *($(ModemIOBaseHexList), $(Offset))
;---------------------------------------------------------------------
read-syms FileDependentDlg$(!STF_LANGUAGE)
SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
ui start "InputDlg"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set IRQValue = $(Combo1Out)
set MemBaseAddress = $(Combo2Out)
set IOBaseAddress = $(Combo3Out)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
set Offset = ~($(MemBaseAddrHexList),$(MemBaseAddress))
set-add Offset = $(Offset),1
set MemBaseAddrValue = *($(MemBaseAddrDecList), $(Offset))
set Offset = ~($(IOBaseAddrHexList),$(IOBaseAddress))
set-add Offset = $(Offset),1
set IOBaseAddrValue = *($(IOBaseAddrDecList), $(Offset))
;----------------------------------------------- WHL Modem Setup ---------
read-syms FileDependent1Dlg$(!STF_LANGUAGE)
SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
ui start "InputDlg"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set ModemIRQValue = $(Combo4Out)
set ComPortValue = $(Combo5Out)
set ModemIOBaseAddress = $(Combo6Out)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
set Offset = ~($(ModemIOBaseHexList),$(ModemIOBaseAddress))
set-add Offset = $(Offset),1
set ModemIOBaseValue = *($(ModemIOBaseDecList), $(Offset))
;---------------------------------------------------------------------
skipoptions =+
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
;*****************************************
; Add the ETHPCM18 to the PCMCIA Database
;*****************************************
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName) $(MAXIMUM_ALLOWED) KeyPcmcia
Ifstr $(KeyPcmcia) == $(KeyNull)
else
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName)"\PCMCIA" $(MAXIMUM_ALLOWED) KeyUE2218
Ifstr $(KeyUE2218) != $(KeyNull)
CloseRegKey $(KeyUE2218)
DeleteRegTree $(KeyPcmcia) "PCMCIA"
endif
CreateRegKey $(KeyPcmcia) { "PCMCIA" , 0 , "" } "" $(MAXIMUM_ALLOWED) "" KeyUE2218
CreateRegKey $(KeyUE2218) { "UE2218-LAN/MODEM" , 0 , "" } "" $(MAXIMUM_ALLOWED) "" KeyUE2218_1
SetRegValue $(KeyUE2218_1) {Driver,$(NoTitle),$(!REG_VT_SZ),Ethpcm18}
CloseRegKey $(KeyPcmcia)
CloseRegKey $(KeyUE2218)
CloseRegKey $(KeyUE2218_1)
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftware$(Option)Title), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Description)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
writeparameters = +
Debug-Output "Write Parameters"
set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),1},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),0},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{CardType,$(NoTitle),$(!REG_VT_DWORD),1},+
{PCCARDAttributeMemoryAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemBaseAddrValue)},+
{PCCARDAttributeMemorySize,$(NoTitle),$(!REG_VT_DWORD),4096},+
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{ComIoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(ModemIOBaseValue)},+
{ComIRQNumber,$(NoTitle),$(!REG_VT_DWORD),$(ModemIRQValue)},+
{ComPort, $(NoTitle),$(!REG_VT_SZ), $(ComPortValue)},+
{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
;---------------------------------------- Modem Section Begin WHL -------
; Add the COM port info to the
; SYSTEM\CurrentControlSet\Services\Serial\Parameters
; section of the registry
; ------------------------------------------------------------
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters\SerialEthpcm18" $(MAXIMUM_ALLOWED) SerialHandle
Ifstr $(SerialHandle) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) SerialKey
CreateRegKey $(SerialKey) {"SerialEthpcm18",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" SerialHandle
CloseRegKey $(SerialKey)
endif
set NewValueList = {{DosDevices, $(NoTitle),$(!REG_VT_SZ), $(ComPortValue)},+ ; "COMx"
{ForceFifoEnable, $(NoTitle), $(!REG_VT_DWORD), 0},+ ; Always false
{Interrupt, $(NoTitle), $(!REG_VT_DWORD), $(ModemIRQValue)},+ ; Interrupt for Modem
{PortAddress, $(NoTitle),$(!REG_VT_DWORD), $(ModemIOBaseValue)}} ; I/O Base address for Modem
Shell $(UtilityInf), AddValueList, $(SerialHandle), $(NewValueList)
CloseRegKey $(SerialHandle)
OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP\SERIALCOMM" $(MAXIMUM_ALLOWED) SerialHandle
Ifstr $(SerialHandle) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP" $(MAXIMUM_ALLOWED) SerialKey
CreateRegKey $(SerialKey) {"SERIALCOMM",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" SerialHandle
CloseRegKey $(SerialKey)
endif
SetRegValue $(SerialHandle) {"SerialEthpcm18",$(NoTitle),$(!REG_VT_SZ),$(ComPortValue)}
CloseRegKey $(SerialHandle)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\Ports" $(MAXIMUM_ALLOWED) SerialHandle
Ifstr $(SerialHandle) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(MAXIMUM_ALLOWED) SerialKey
CreateRegKey $(SerialKey) {"Ports",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" SerialHandle
CloseRegKey $(SerialKey)
endif
SetRegValue $(SerialHandle) {$(ComPortValue)":",$(NoTitle),$(!REG_VT_SZ), "9600,n,8,1"}
CloseRegKey $(SerialHandle)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "<DBG> ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "<DBG> Registry error: Add value list"
goto fatalregistry
endif
EndWait
goto successful
;---------------------------------------- Modem Section WHL END -------
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Debug-Output "Remove Adapter"
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName) $(MAXIMUM_ALLOWED) KeyPcmcia
Ifstr $(KeyPcmcia) == $(KeyNull)
else
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName)"\PCMCIA" $(MAXIMUM_ALLOWED) KeyUE2218
Ifstr $(KeyUE2218) != $(KeyNull)
CloseRegKey $(KeyUE2218)
DeleteRegTree $(KeyPcmcia) "PCMCIA"
endif
CloseRegKey $(KeyPcmcia)
endif
; delete serial device
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) SerialHandle
Ifstr $(SerialHandle) != $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters\SerialEthpcm18" $(MAXIMUM_ALLOWED) SerialKey
Ifstr $(SerialKey) != $(KeyNull)
DeleteRegTree $(SerialHandle) "SerialEthpcm18"
endif
CloseRegKey $(SerialHandle)
endif
;
goto end
UpgradeSoftware = +
Debug-Output "Upgrate Software"
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
goto end
successful = +
goto end
abandon = +
Debug-Output "Abandon"
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[Install-Hlp]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Install-Option]
Debug-Output "Install-Option"
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-ETHPCM18 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
ifstr(i) $(DoConfig) == "YES"
endif
Exit
[Install-Update]
Debug-Output "Install-Update"
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-ETHPCM18 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
exit
[Source Media Descriptions]
1 = "Ethernet+Modem PC Card Driver Diskette"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1,oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
[Files-ETHPCM18]
1,ethpcm18.SYS , SIZE=19456
[Files-Hlp]
1,ETHPCM18.HLP , SIZE=999
[LanguagesSupported]
ENG
[OptionsTextENG]
ETHPCM18 = "Ethernet+Modem PC Card"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
ProductSoftwareETHPCM18Description = "Ethernet+Modem PC Card Driver"
ProductSoftwareETHPCM18Title = "Ethernet+Modem PC Card Driver"
ProductHardwareETHPCM18Description = "Ethernet+Modem PC Card"
ProductHardwareETHPCM18Title = "Ethernet+Modem PC Card"
FunctionTitle = "Ethernet+Modem PC Card Setup"
FunctionTitleLAN = "Ethernet+Modem PC Card LAN Setup"
FunctionTitleModem = "Ethernet+Modem PC Card Modem Setup"
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = "Shell Code Error."
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
Combo1Label = "LAN &IRQ Level:"
Combo2Label = "&Memory Base Address:"
Combo3Label = "LAN I/&O Port Address:"
DlgType = "MultiCombo"
DlgTemplate = "WD"
Caption = $(FunctionTitleLAN)
Combo1List = $(IRQList)
Combo1Out = $(IRQValue)
Combo2List = $(MemBaseAddrHexList)
Combo2Out = $(MemBaseAddress)
Combo3List = $(IOBaseAddrHexList)
Combo3Out = $(IOBaseAddress)
ComboListItemsIn = {Combo1List, Combo2List, Combo3List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out}
EditTextIn = ""
EditTextLim = ""
NotifyFields = {NO, NO, NO}
MinHelpId = 10
MaxHelpId = 1070
HelpContext = $(Help$(Option)Id)
[FileDependent1DlgENG]
Combo1Label = "Modem IR&Q Level:"
Combo2Label = "Modem &COM Port:"
Combo3Label = "Modem I/O &Port Address:"
DlgType = "MultiCombo"
DlgTemplate = "WD"
Caption = $(FunctionTitleModem)
Combo4List = $(IRQList)
Combo4Out = $(ModemIRQValue)
Combo5List = $(ComPortList)
Combo5Out = $(ComPortValue)
Combo6List = $(ModemIOBaseHexList)
Combo6Out = $(ModemIOBaseAddress)
ComboListItemsIn = {Combo4List, Combo5List, Combo6List}
ComboListItemsOut = {Combo4Out, Combo5Out, Combo6Out}
EditTextIn = ""
EditTextLim = ""
NotifyFields = {NO, NO, NO}
MinHelpId = 10
MaxHelpId = 1070
HelpContext = $(Help$(Option)Id)
[ComPortChoices]
CP_1 = "COM1", 1
CP_2 = "COM2", 2
CP_3 = "COM3", 3
CP_4 = "COM4", 4
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.